Dataset Information

Sagittal ankle position does not affect axial CT measurements of the syndesmosis in a cadaveric model.

ABSTRACT:

Background

The purpose of this study was to evaluate the effect of ankle plantarflexion and the axial location of measurement on quantitative syndesmosis assessment.

Methods

Twelve fresh-frozen cadaveric specimens were secured in three positions of ankle plantarflexion (0°, 15°, and 30°) using an ankle-spanning external fixator and underwent CT scans at each position. Syndesmotic measurements were obtained on axial images using three previously described methods (six measurements) at the level of the tibial plafond and 1 cm proximal to the plafond. Method 1 evaluated the distance between the most anterior and posterior aspects of the fibula and tibia. Method 2 measured medial-lateral diastasis of the anterior and posterior aspects of the fibula, and fibular anterior-posterior translation. Method 3 evaluated axial rotation of the fibula. All measurements were performed by two independent observers. Inter-rater reliability of each measurement was evaluated using intra-class coefficients. Repeated measures analysis of variance (RM-ANOVA) was performed to evaluate within-specimen differences in measurements obtained at varying ankle positions.

Results

The anterior incisura component of method 1 demonstrated poor-to-moderate inter-rater reliability across all ankle positions and at both measurement locations. Inter-rater reliability was highest for method 2, especially when measured 1 cm proximal to the plafond. Method 3 demonstrated moderate reliability 1 cm proximal to the plafond. After correcting for multiple comparisons, RM-ANOVA and pairwise analysis revealed that none of the measurements changed significantly with varying ankle position.

Conclusion

The inter-rater reliability of the most common method of syndesmotic evaluation (method 1) was found to be lower than in previous studies. The most reliable syndesmotic evaluation can be made by measuring diastasis and anteroposterior translation 1 cm proximal to the plafond (method 2). Ankle position from 0° to 30° of plantarflexion did not change the measurements obtained.

Level of evidence

IV.

SUBMITTER: Levack AE

PROVIDER: S-EPMC7063590 | biostudies-literature | 2020 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Sagittal ankle position does not affect axial CT measurements of the syndesmosis in a cadaveric model.

Levack Ashley E AE Dvorzhinskiy Aleksey A Gausden Elizabeth B EB Garner Matthew R MR Warner Stephen J SJ Fabricant Peter D PD Lorich Dean G DG

Archives of orthopaedic and trauma surgery 20190527 1

<h4>Background</h4>The purpose of this study was to evaluate the effect of ankle plantarflexion and the axial location of measurement on quantitative syndesmosis assessment.<h4>Methods</h4>Twelve fresh-frozen cadaveric specimens were secured in three positions of ankle plantarflexion (0°, 15°, and 30°) using an ankle-spanning external fixator and underwent CT scans at each position. Syndesmotic measurements were obtained on axial images using three previously described methods (six measurements) ...[more]

PMID: 31134373

Similar Datasets

Project description:BackgroundThe precise anatomical reduction of the ankle mortise is crucial for the clinical outcome in unstable syndesmotic injuries. Intraoperative cone beam computed tomography (CT), in addition to two-dimensional fluoroscopy, provides detailed information about the reduction and implant placement. The aim of this study was to analyze the influence of the joint position on the fibula position in the incisural notch and to determine the inter- and intraindividual anatomical differences in the intact ankle joints.MethodsA total of 20 fresh-frozen lower legs disarticulated in the knee joint of 10 individuals were included. The measurements were performed using a cone beam CT. The distances and angles were measured in the standard imaging planes. The mean values of distances and angles were compared during the different joint positions: 10° dorsiflexion, 0° neutral position and 20° plantar flexion.ResultsThe influence of the joint position was on average as follows: The anterior tibiofibular distance was 3.68 mm in 10° dorsiflexion, 3.66 mm (0° neutral position) and 3.59 mm (20° plantar flexion). The posterior tibiofibular distance measured 7.82mm, 7.76mm and 7.82mm. The rotation of the fibula measured ten millimeters proximal the joint line was 1.2°, 1.3° and 1.05°. The fibular rotation determined 4mm was 9.3°, 9.4° and 9.4°. On average, the following intraindividual variations were observed: superior tibiotalar clear space of 0.27mm and 0.15mm medial; and anterior tibiofibular distance of 0.42mm, 0.38mm posterior and 0.24mm in the incisural notch. The proximal angle of the fibular rotation was 0.2° and distal 0.4°. The interindividual variations of the angles and distances exceeded the intraindividual values partly by 3 to 4 fold.ConclusionsWithin the scope of this study neither the tibiofibular distance, nor the tibiofibular angle changed significantly through the different joint positions. The intraindividual differences were little while the interindividual variations of the parameters were distinctive.

Project description:BackgroundThis investigation's purpose was to perform a systematic review of the literature examining the biomechanics of the ligaments comprising the distal tibiofibular syndesmosis with specific attention to their resistance to translational and rotational forces. Although current syndesmosis repair techniques can achieve an anatomic reduction, they may not reapproximate native ankle biomechanics, resulting in loss of reduction, joint overconstraint, or lack of external rotation resistance. Armed with a contemporary understanding of individual ligament biomechanics, future operative strategies can target key stabilizing structure(s), translating to a repair better equipped to resist anatomic displacing forces.Study designSystematic review.MethodsA systematic review was conducted according to the Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA) guidelines using a PRISMA checklist. Biomechanical studies testing cadaveric lower limb specimens in the intact and injured state measuring the distal tibiofibular syndesmosis resistance to translational and rotational forces were included in this review. Only studies that included numerical data were included in this review; studies that only reported figures and graphs were excluded.ResultsTwelve studies met the inclusion and exclusion criteria. Two studies determined the mechanical properties of syndesmotic ligaments, finding superior strength and stiffness of the interosseous ligament (IOL), as compared to the anterior (AITFL) or posteroinferior tibiofibular ligament (PITFL). Four studies examined native ankle biomechanics establishing physiologic range of motion of the fibula relative to the tibia. Fibular range of motion was found to be up to 2.53 mm of posterior translation (Markolf et al), 1.00 mm lateral translation (Xenos et al), 3.6 degrees of external rotation (Burssens et al), and 1.4 degrees of internal rotation (Clanton et al). Four studies evaluated syndesmotic biomechanics under physiological loading and found that the AITFL, IOL, and PITFL provide the majority of resistance to external rotation, diastasis, and internal rotation, respectively. Two studies investigated the biomechanics of clinically and intraoperatively used tests for syndesmotic injuries and found increased sensitivity of sagittal plane posterior fibular translation, as opposed to coronal plane lateral fibular translation for unstable injuries.ConclusionsStudy findings suggest that although the IOL is the strongest syndesmotic ligament, the AITFL has a dominant role stabilizing the distal tibiofibular syndesmosis to external rotation force. Because of these characteristics, operative repair of the AITFL along its native vector may provide a more biomechanically advantageous construct and should be investigated clinically. Additionally, evaluation of clinical stress tests revealed that the external rotation stress test is the most sensitive test to recognize an AITFL tear, and that a 3-ligament disruption is needed to cause diastasis greater than 2 mm.

Project description:BackgroundDocumenting the healthy articulation of the syndesmosis and talocrural joints, and measurement of 3D medial and lateral clear spaces may improve diagnostic and treatment guidelines for patients suffering from severe syndesmotic injury or chronic instability. This study aimed to define the range of motion (ROM) and displacement of the fibula and talus during static and dynamic activities, and measure the 3D movement in the tibiofibular (syndesmosis) and medial clear space.MethodsSix healthy volunteers performed dynamic weightbearing motions on a single-leg: heel-rise, squat, torso twist, and box jump. Participants posed in a nonweightbearing neutral stance as well as weightbearing neutral standing, plantarflexion, and dorsiflexion. High-speed stereoradiography measured 3D rotation and translation of the fibula and talus throughout each task. Medial clear space and tibiofibular gap distances were measured under each condition.ResultsTotal ROM for the fibula was greatest in internal-external rotation (9.3 ± 3.5 degrees), and anteroposterior (3.3 ± 2.2 mm) and superior-inferior (2.5 ± 0.9 mm) translation, rather than lateral widening (1.7 ± 1.0 mm). The total rotational ROM of the talus was greatest in dorsiflexion-plantarflexion (34.7 ± 12.9 degrees) and internal-external rotation (15.0 ± 3.4 degrees). Single-leg squatting increased the lateral clear space (P = .045) and widened the medial tibiofibular joint, whereas single-leg heel-rises decreased the lateral clear space (P = .001) and widened the tibiotalar space. Gap spaces in the tibiofibular and medial clear spaces did not exceed 2.3 ± 0.9 mm and 2.7 ± 1.2 mm, respectively.ConclusionThese data support a potential shift in the clinical understanding of fibula displacements during dynamic activities and how implant device constructs might be developed to restore physiologic mechanics.Clinical relevanceSyndesmosis stabilization and rehabilitation should consider restoration of normal physiologic rotation and translation of the fibula and ankle mortise rather than focusing solely on the restriction of lateral translation.

Project description:BackgroundIn total ankle replacement (TAR), correct positioning of the implant is crucial. Malposition of the components may increase contact pressures and diminish prosthesis survival. The effect of sagittal tibiotalar alignment on functional outcomes after fixed-bearing TAR remains unclear, however, and no studies have compared fixed-bearing implants with respect to the anteroposterior (AP) position of the talar component.Questions/purposeThe purposes of this study were (1) to evaluate the effect of sagittal tibiotalar alignment on functional outcomes in fixed-bearing TAR and (2) to compare post-operative sagittal tibiotalar alignment in two types of fixed-bearing implants.MethodsIn a retrospective analysis of 71 primary TARs performed at a single center, we studied the INBONE™ II Total Ankle System and the Salto Talaris® Ankle. Radiographic measurements of the tibial axis-talus (T-T) ratio and the AP offset ratio were performed before and after surgery, respectively, and we evaluated Foot and Ankle Outcome Scores (FAOSs) and the 12-item Short Form Health Survey (SF-12) mental component summary (MCS) and physical component summary (PCS) scales pre-operatively and at 2 years after surgery. The Pearson correlation and independent-samples t test were used to evaluate differences in FAOSs, SF-12 MCS scores, and SF-12 PCS scores regarding post-operative sagittal alignment.ResultsPost-operative sagittal tibiotalar alignment was neutral in 39 ankles and anterior in 32 ankles. We observed no significant between-group differences in clinical outcome scores. Patients with a Salto Talaris Ankle prosthesis had a greater AP offset ratio (0.12) than patients with an INBONE II implant (0.05). However, the greater translation did not correlate with outcome scores.ConclusionAt the 2-year follow-up, no correlation between the post-operative AP offset ratio and functional outcome scores was observed between the two fixed-bearing-implant groups. Further studies with longer follow-up are needed to determine whether the difference in sagittal alignment has an effect on functional outcomes in the long term.

Project description:BackgroundWhile recent research has investigated the normative values, discriminative capacity, and interrater reliability of radiographic indices for the evaluation of the syndesmosis in adults, no such data exist for children. The purposes of the present study were (1) to determine the interrater reliability of common radiographic measures of syndesmosis and deltoid ligament competency in children and (2) to establish age-based normative values.MethodsA consecutive series of patient radiographs from a Level-I pediatric trauma center were identified and were used to create an age and sex-balanced cohort of 282 patients. Subjects between 2 and 17 years of age were randomly selected from a pool of patients who had a complete 3-view (anteroposterior, lateral, and mortise) radiographic ankle series and a final diagnosis without osseous or ligamentous injury. Eight age and sex-balanced groups were created for analysis. Three independent raters evaluated all radiographs and recorded radiographic indices that are commonly used for the evaluation of ankle trauma: width of medial clear space, width of superior clear space, tibiofibular clear space, tibiofibular overlap, and medial clear space/superior clear space ratio. Interrater reliability was calculated with use of the intraclass correlation coefficient (ICC); means and standard deviations were used to report age-group normative values.ResultsTwo hundred and eighty-two patients (mean age [and standard deviation], 9.6 ± 4.6 years) were analyzed. The superior clear space and tibiofibular overlap demonstrated excellent interrater reliability (ICC = 0.915 and 0.964, respectively), the medial clear space and tibiofibular clear space demonstrated substantial agreement (ICC = 0.656 and 0.635, respectively), and the medial clear space/superior clear space ratio demonstrated moderate agreement (ICC = 0.418). The medial clear space could not be reliably measured until the age of 8 years because of insufficient ossification of the medial malleolus. Tibiofibular overlap demonstrated a linear increase over time, ranging from -1.4 mm in 2 and 3-year-old patients to 6.7 mm in 16 and 17-year-old patients (R2 = 0.995). Normative values varied by age and sex.ConclusionsThe medial clear space and medial clear space/superior clear space ratio could not be reliably assessed for children under 8 years of age and were thus characterized by suboptimal interrater reliability. Tibiofibular overlap had excellent interrater agreement, changed predictably with skeletal growth, and may be useful for future research as well as the clinical assessment of pediatric ankle injuries to guide clinical decision-making.Level of evidenceDiagnostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Project description:Pelvic sagittal inclination (PSI) is often evaluated in patients with hip pathology using lateral radiographs. However, it would be useful if PSI could be predicted from an anteroposterior radiograph since this film is ubiquitous in the evaluation of hip pathology. Herein, computer-modeling was applied to predict PSI from radiographic measurements assessed in the anteroposterior plane. Three-dimensional surface models of the pelvis, femur, and sacrum were reconstructed from computed tomography images of 50 women with hip dysplasia. This study cohort was selected as changes in PSI alter femoral head coverage, which is relevant to the diagnosis and treatment of hip dysplasia, a known cause of hip osteoarthritis. Five radiographic parameters commonly used to independently estimate PSI were evaluated after bone surfaces were projected to an anteroposterior plane, including the symphysis to sacrococcygeal joint distance (S-S distance), the pelvic foramen aspect ratio (PF ratio), the distance between the symphysis and a line connecting the femoral head centers (S-H distance), the sacro-femoral-pubic angle (SFP angle), and the pelvic vertical ratio (PVR). Regression models determined the ability of these parameters to predict PSI from -20° to 20° at 1° increment. All five parameters showed a strong correlation with the PSI (all r > 0.9). From the regression models, PSI was estimated with a median (maximum) absolute error of 3.6° (18.4°), 3.8° (17.7°), 5.2° (17.9°), 5.8° (28.8°), and 3.2° (23.5°) for the S-S distance, PF ratio, S-H distance, SFP angle, and PVR, respectively. The regression model for S-S distance had a mean slope of 2.18 that ranged from 1.98 to 2.41 when the sacrococcygeal joint was located superior to the symphysis. Results indicated that substantial errors occur when estimating the actual value of PSI from an anteroposterior radiograph. However, the change in PSI could be estimated from the S-S distance, which may aid surgeons to successfully increase head coverage through periacetabular osteotomy and to locate the acetabular cup in a functional position for total hip arthroplasty.

Dataset Information

Sagittal ankle position does not affect axial CT measurements of the syndesmosis in a cadaveric model.

Background

Methods

Results

Conclusion

Level of evidence

Publications

Sagittal ankle position does not affect axial CT measurements of the syndesmosis in a cadaveric model.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets