Dataset Information

Efficient Catalytic Upgradation of Bio-Based Furfuryl Alcohol to Ethyl Levulinate Using Mesoporous Acidic MIL-101(Cr).

ABSTRACT: Enlarging the dispersed micropores of metal-organic frameworks to the well-ordered mesostructure can enhance the accessibility of acidic sites for reactants resulting in the improvement of selectivity. With the regulation of cetyltrimethylammonium bromide/Cr3+ and ClSO3H sulfonation, a series of mesoporous MIL-101(Cr)-SO3H (MMSs) with multiple pore sizes and acidic properties were synthesized and explored to further facilitate the furfuryl alcohol (FA) ethanolization to ethyl levulinate (EL) for the first time. The optimal catalytic activity of 83.8% EL yield at full FA conversion demonstrated that the appropriate mesopore size, acidic density, and accessible -SO3H sites contributed to the superior performance of the MMS(0.3)-0.15. The turnover frequency value (14.8 h-1) obtained with MMS(0.3)-0.15 was comparable to the commercial Nafion NR50 (18.3 h-1) and much higher than the classical Amberlyst-15 (1.9 h-1), confirming the predominant catalytic performance. Furthermore, two coexistent reaction paths with 2-ethoxymethylfuran and 4,5,5-triethoxy-pentan-2-one as intermediates indicated the possibility of producing EL from FA.

SUBMITTER: Liu X

PROVIDER: S-EPMC6545550 | biostudies-literature | 2019 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Efficient Catalytic Upgradation of Bio-Based Furfuryl Alcohol to Ethyl Levulinate Using Mesoporous Acidic MIL-101(Cr).

Liu Xiaofang X Pan Hu H Zhang Heng H Li Hu H Yang Song S

ACS omega 20190513 5

Enlarging the dispersed micropores of metal-organic frameworks to the well-ordered mesostructure can enhance the accessibility of acidic sites for reactants resulting in the improvement of selectivity. With the regulation of cetyltrimethylammonium bromide/Cr3+ and ClSO3H sulfonation, a series of mesoporous MIL-101(Cr)-SO3H (MMSs) with multiple pore sizes and acidic properties were synthesized and explored to further facilitate the furfuryl alcohol (FA) ethanoliza ...[more]

PMID: 31172039

Similar Datasets

Project description:In this study, hybrids of nanoporous MIL-101(Cr) and MIL-53(Al) were synthesized using a hydrothermal method for various time periods, ranging from 8 to 40 h. The prepared materials were characterized by powder X-ray diffraction (PXRD) and elemental analysis, and their specific surface areas were measured by N2 sorption at 77 K using the Brunauer-Emmett-Teller (BET) method. To investigate the practical application of these materials, the pure carbon dioxide and methane adsorption capacities of the samples were determined using the volumetric method. The Langmuir model was used to fit the CO2 and CH4 isotherms. Extended Langmuir (EL) equations and the ideal adsorbed solution theory (IAST) models were used to obtain the CO2/CH4 selectivity. The sample with the highest BET specific surface area was selected as a candidate for further investigations. The thermal stability of the selected sample was investigated by thermogravimetric analysis (TGA). Scanning electron microscopy (SEM) was used to characterize the sample morphology. XRD results showed that the sample synthesized over the shortest time corresponded to MIL-101(Cr), while the sample synthesized over the longest time was in agreement with MIL-53(Al). Samples synthesized for time periods between these two limits were assumed to be composites of both MIL-53(Al) and MIL-101(Cr). TGA results indicated that the hybrid materials were thermally stable at temperatures about 100 °C higher than for pure MIL-101(Cr). The BET specific surface area (1746 m2 g-1) and CO2 adsorption capacity (16 mmol g-1) of the selected hybrid sample were about 50% and 35% higher, respectively, compared with those of pure MIL-53(Al), but 30% and 20% lower, respectively, compared with those of pure MIL-101(Cr). Binary adsorption modeling showed the high selectivity of the MIL-101(Cr) and MIL-53(Al) hybrid material for CO2 with a minimum separation factor of about 60 at 298 K. This value was much higher than those reported previously and those observed in this work for the original MIL-101(Cr) or MIL-53(Al). These results demonstrated that the hybrid of MIL-101(Cr) and MIL-53(Al) was a promising material for selective CO2 capture from natural and biogas.

Dataset Information

Efficient Catalytic Upgradation of Bio-Based Furfuryl Alcohol to Ethyl Levulinate Using Mesoporous Acidic MIL-101(Cr).

Publications

Efficient Catalytic Upgradation of Bio-Based Furfuryl Alcohol to Ethyl Levulinate Using Mesoporous Acidic MIL-101(Cr).

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets