Browse
Submit Data
Databases
API
Help

Dataset Information

16 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Synergy of Nb Doping and Surface Alloy Enhanced on Water-Alkali Electrocatalytic Hydrogen Generation Performance in Ti-Based MXene.

ABSTRACT: Presented are the theoretical calculation and experimental studies of a Ti₃C₂T _x MXene-based nanohybrid with simultaneous Nb doping and surface transition metal alloy modification. Guided by the density functional theory calculation, the Nb doping can move up the Fermi energy level to the conduction band, thus enhancing the electronic conductivity. Meanwhile, the surface modification by Ni/Co alloy can moderate the surface M-H affinity, which will further enhance the hydrogen evolution reaction (HER) activity. A series of Ni/Co alloy attached on Nb-doped Ti₃C₂T _x MXene nanohybrids (denoted as NiCo@NTM) are successfully prepared. As expected, the Ni_0.9Co_0.1@ NTM nanohybrids present an extraordinary HER activity in alkaline solution, which only needs an overpotential (η) of 43.4 mV to reach the current density of 10 mA cm^-2 in 1 m KOH solution and shows good stability. The performance of the Ni_0.9Co_0.1@ NTM nanohybrids is comparable to the commercial 10% Pt/C electrode (34.4 mV@10 mA cm^-2) and is better than most state-of-the-art Pt-free HER catalysts. Inspired by the facile synthesis process and chemical versatility of both MXene and transition metal alloys, the nanohybrids reported here are promising non-noble metal electrocatalysts for water-alkali electrolysis.

SUBMITTER: Du CF

PROVIDER: S-EPMC6548967 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

How 10 at% Al Addition in the Ti-V-Zr-Nb High-Entropy Alloy Changes Hydrogen Sorption Properties.

Project description:Al0.10Ti0.30V0.25Zr0.10Nb0.25 was prepared to evaluate the effect of 10% aluminum into the previously reported quaternary alloy, Ti0.325V0.275Zr0.125Nb0.275. The as-cast quinary alloy formed a single-phase body centered cubic solid solution and transformed into a body centered tetragonal after hydrogenation. The alloy had a storage capacity of 1.6 H/M (2.6 wt.%) with fast absorption kinetics at room temperature, reaching full capacity within the first 10 min. The major improvements of Al addition (10%) were related to the desorption and cycling properties of the material. The temperature for hydrogen release was significantly decreased by around 100 °C, and the quinary alloy showed superior cycling stability and higher reversible storage capacity than its quaternary counterpart, 94% and 85% of their respective initial capacity, after 20 hydrogenation cycles without phase decomposition.

| S-EPMC8122896 | biostudies-literature

Microstructural Considerations of a Multi-Pass Rolled Ti-Nb-Ta-Zr Alloy.

Project description:The microstructural characteristic evolution was investigated during thermomechanical processing of Ti-29Nb-9Ta-10Zr (wt %) alloy, which consisted of, in a first stage, in a Multi-Pass Rolling with increasing thickness reduction of 20%, 40%, 60%, 80%, and 90%; in step two, the multi-pass rolled sample with the highest thickness reduction (90%) was subjected to a series of three variants of static short recrystallization and then to a final similar aging. The objective was to evaluate the microstructural features evolution during thermomechanical processing (phase's nature, morphology, dimensions, and crystallographic characteristics) and to find the optimal heat treatment variant for refinement of the alloy granulation until ultrafine/nanometric level for a promising combination of mechanical properties. The microstructural features were investigated by X-ray diffraction and SEM techniques through which the presence of two phases was recorded: the β-Ti phase and the α″-Ti martensitic phase. The corresponding cell parameters, dimensions of the coherent crystallite and the micro-deformations at the crystalline network level for both recorded phases were determined. The majority β-Ti phase underwent a strong refinement during the Multi-Pass Rolling process until ultrafine/nano grain dimension (about 9.8 nm), with subsequent slow growing during recrystallization and aging treatments, hindered by the presence of sub-micron α″-Ti phase dispersed inside β-Ti grains. An analysis concerning the possible deformation mechanisms was performed.

| S-EPMC10144209 | biostudies-literature

Biomechanical evaluation of Ti-Nb-Sn alloy implants with a low Young's modulus.

Project description:Dental implants are widely used and are a predictable treatment in various edentulous cases. Occlusal overload may be causally related to implant bone loss and a loss of integration. Stress concentrations may be diminished using a mechanobiologically integrated implant with bone tissue. The purpose of this study was to investigate the biomechanical behavior, biocompatibility and bioactivity of a Ti-Nb-Sn alloy as a dental implant material. It was compared with cpTi. Cell proliferation and alkaline phosphatase (ALP) activity were quantified. To assess the degree of osseointegration, a push-in test was carried out. Cell proliferation and ALP activity in the cells grown on prepared surfaces were similar for the Ti-Nb-Sn alloy and for cpTi in all the experiments. A comparison between the Ti-Nb-Sn alloy implant and the cpTi implant revealed that no significant difference was apparent for the push-in test values. These results suggest that implants fabricated using Ti-Nb-Sn have a similar biological potential as cpTi and are capable of excellent osseointegration.

| S-EPMC4394505 | biostudies-literature

Plastic deformation behaviour of single-crystalline martensite of Ti-Nb shape memory alloy.

Project description:?-Ti alloys have attracted considerable attention as new biomedical shape memory alloys. Given the critical importance of the plastic deformation in the martensite phase for the shape memory effect and superelasticity, we investigated here the plastic deformation behaviour of a single crystal of ?? (orthorhombic) martensite of Ti-27?mol%Nb shape memory alloy obtained by the stress-induced martensitic transformation of a single crystal of the parent ? phase. Four operative plastic deformation modes were observed, including two dislocation slips and two twinnings. To the best of our knowledge, two of these plastic deformation modes (one dislocation slip and one twinning) were discovered for the first time in this study. The identified slip and twinning systems in the martensite phase have corresponding slip and twinning systems in the parent ? phase with which they share many similarities. Therefore, we believe that the plastic deformation of the ?? martensite is inherited from that of the parent ? phase.

| S-EPMC5691214 | biostudies-literature

Electrochemical and biological characterization of Ti-Nb-Zr-Si alloy for orthopedic applications.

Project description:The performance of current biomedical titanium alloys is limited by inflammatory and severe inflammatory conditions after implantation. In this study, a novel Ti-Nb-Zr-Si (TNZS) alloy was developed and compared with commercially pure titanium, and Ti-6Al-4V alloy. Electrochemical parameters of specimens were monitored during 1 h and 12 h immersion in phosphate buffered saline (PBS) as a normal, PBS/hydrogen peroxide (H2O2) as an inflammatory, and PBS/H2O2/albumin/lactate as a severe inflammatory media. The results showed an effect of the H2O2 in inflammatory condition and the synergistic behavior of H2O2, albumin, and lactate in severe inflammatory condition towards decreasing the corrosion resistance of titanium biomaterials. Electrochemical tests revealed a superior corrosion resistance of the TNZS in all conditions due to the presence of silicide phases. The developed TNZS was tested for subsequent cell culture investigation to understand its biocompatibility nature. It exhibited favorable cell-materials interactions in vitro compared with Ti-6Al-4V. The results suggest that TNZS alloy might be a competitive biomaterial for orthopedic applications.

| S-EPMC9911760 | biostudies-literature

Synthesis and Characterization of a Novel Biocompatible Alloy, Ti-Nb-Zr-Ta-Sn.

Project description:Many current-generation biomedical implants are fabricated from the Ti-6Al-4V alloy because it has many attractive properties, such as low density and biocompatibility. However, the elastic modulus of this alloy is much larger than that of the surrounding bone, leading to bone resorption and, eventually, implant failure. In the present study, we synthesized and performed a detailed analysis of a novel low elastic modulus Ti-based alloy (Ti-28Nb-5Zr-2Ta-2Sn (TNZTS alloy)) using a variety of methods, including scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and tensile test. Additionally, the in vitro biocompatibility of the TNZTS alloy was evaluated using SCP-1, SaOs-2, and THP-1 cell lines and primary human osteoblasts. Compared to Ti-6Al-4V, the elastic modulus of TNZTS alloy was significantly lower, while measures of its in vitro biocompatibility are comparable. O2 plasma treatment of the surface of the alloy significantly increased its hydrophilicity and, hence, its in vitro biocompatibility. TNZTS alloy specimens did not induce the release of cytokines by macrophages, indicating that such scaffolds would not trigger inflammatory responses. The present results suggest that the TNZTS alloy may have potential as an alternative to Ti-6Al-4V.

| S-EPMC8509052 | biostudies-literature

Nano-Topographical Control of Ti-Nb-Zr Alloy Surfaces for Enhanced Osteoblastic Response.

Project description:Nano-scale surface roughening of metallic bio-implants plays an important role in the clinical success of hard tissue reconstruction and replacement. In this study, the nano-topographical features of titanium-niobium-zirconium (TNZ) alloy surfaces were controlled by using the target-ion induced plasma sputtering (TIPS) technique to improve the in vitro osteoblastic response. The TIPS technique is a novel strategy for etching the surface of metallic bio-implants using bombardment of target metal cations, which were accelerated by an extremely high negative bias voltage applied to the substrates. The nano-topography of the TNZ surfaces was successfully controlled by modulating experimental variables (such as the ion etching energy and the type of substrate or target materials) of TIPS. As a result, various nanopatterns (size: 10-210 nm) were fabricated on the surface of the TNZ alloys. Compared with the control group, experimental groups with nanopattern widths of ≥130 nm (130 and 210 nm groups) exhibited superior cell adhesion, proliferation, and differentiation. Our findings demonstrate that TIPS is a promising technology that can impart excellent biological functions to the surface of metallic bio-implants.

| S-EPMC8229642 | biostudies-literature

Three-Dimensional Imaging of Dislocations in a Ti-35mass%Nb Alloy by Electron Tomography.

Project description:We have studied three-dimensional (3D) configurations of dislocations in the β phase of a Ti-35mass%Nb alloy by means of single-axis tilt tomography using bright-field scanning transmission electron microscopy (BF-STEM). To visualize dislocations, the hh0 systematic reflections were excited throughout tilt-series acquisition with the maximum tilt angle of 70°. Dislocations in the β grains were clearly reconstructed by the weighted back-projection algorithm. The slip planes of the dislocations were deduced by rotating the reconstructed volumes with the aid of selected area electron diffraction patterns. It was found that BF-STEM images with relatively low contrasts, taken along low-order zone axes, are capable to reproduce and preserve the quality of reconstructed image of dislocations. We also found that tilt angles as low as 40° are practically acceptable to visualize 3D configurations of dislocations, while there exists limitation in resolution due to the existence of a large missing wedge.

| S-EPMC5507017 | biostudies-literature

Mechanochemical Synthesis of Pt/Nb2CTx MXene Composites for Enhanced Electrocatalytic Hydrogen Evolution.

Project description:Production of hydrogen from water splitting has been considered as a promising solution for energy conversion and storage. Since a noble metal-based structure is still the most satisfactory but scarce kind of catalyst, it is significant to allow for practical application of such catalysts by engineering the heterogeneous structure and developing green and facile synthetic strategies. Herein, we report a mechanochemical ball milling synthesis of platinum nanoclusters immobilized on a 2D transition metal carbide MXene (Nb2CTx) as an enhanced catalyst for hydrogen evolution. After annealing at 600 °C, ultrafine Pt3Nb nanoclusters are formed on the Pt/Nb2CTx catalyst. As prepared, the Pt/Nb2CTx-600 catalyst demonstrates superior electrochemical HER activity and stability with an ultralow overpotential of 5 mV and 46 mV to achieve 10 mA cm-2 and 100 mA cm-2, respectively, in comparison with other Nb2CTx-based catalysts and commercial Pt/C catalysts. Moreover, the remarkable durability is also confirmed by accelerated durability tests (ADTs) and long-term chronoamperometry (CA) tests. The excellent HER performance was attributed to high Pt dispersion and more active site exposure by the mechanochemical process and thermal treatment. Such results suggest that the mechanochemical strategy provides a novel approach for rational design and cost-effective production of electrocatalysts, also providing other potential applications in a wide range of areas.

| S-EPMC8124981 | biostudies-literature

Enhanced electrocatalytic hydrogen evolution by molybdenum disulfide nanodots anchored on MXene under alkaline conditions.

Project description:Efficient hydrogen production through electrocatalysis represents a promising path for the future clean energy. Molybdenum disulfide (MoS2) is a good substitute for platinum-based catalysts, due to its low cost and high activity. However, the limited active sites and low electrical conductivity of MoS2 hinder its large-scale industrial application under alkaline conditions. Herein, we constructed MoS2 nanodots anchored on an MXene/nickel foam (MoS2 NDs/MXene/NF) heterostructure by a cascade polymerization synthesis and in situ vulcanization. The prepared heterostructure displays an ultralow overpotential of 94 mV at a current density of 10 mA cm-2 with a Tafel slope of only 59 mV dec-1 in alkaline (1 M KOH) hydrogen evolution reaction (HER), and is better than conventional MoS2 electrocatalysts reported so far. Fine structural analysis indicates that MoS2 NDs are dispersed uniformly on the surface of the heterostructure with consistent orientation, leading to the improvement of MoS2 conductivity with more paths for electron transfer. Moreover, the orientation of the synthesized MoS2 NDs was verified to expose the more (002) crystal plane, which exhibits higher activity than other planes. Our results demonstrate that MoS2 NDs with heterostructure design and preferential growth can serve as high-efficiency noble-metal free electrocatalysts for the HER in alkaline solution.

| S-EPMC9419422 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data