Browse
Submit Data
Databases
API
Help

Dataset Information

8 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effects of Ca²⁺ and fulvic acids on atrazine degradation by nano-TiO₂: Performances and mechanisms.

ABSTRACT: In this study, the adsorption and UV photocatalytic degradation of atrazine using nano-TiO₂ particles were studied systematically, and the colloidal stability of nano-TiO₂ particles in solution was also investigated to reveal the removal mechanism. Experiments which contained the first 6.0 hours darkness and 4.0 hours UV illumination later were conducted at different concentrations of Ca²⁺ and/or fulvic acids (FA) at pH = 7.0. Results showed that the adsorption rate of atrazine onto nano-TiO₂ particles decreased with the increase of Ca²⁺ and/or FA concentrations, which could be explained well by the colloidal stability of nanoparticles. When the solution contained Ca²⁺ or Ca²⁺-FA, the nanoparticles were aggregated together leading to the decrease of the contact surface area. Besides, there existed competitive adsorption between FA and atrazine on the particle surface. During photocatalytic degradation, the increase of Ca²⁺ and/or FA concentration accelerated the aggregation of nano-TiO₂ particles and that reduced the degradation efficiency of atrazine. The particle sizes by SEM were in accordance with the aggregation degree of nanoparticles in the solutions. Sedimentation experiments of nano-TiO₂ particles displayed that the fastest sedimentation was happened in the CaCl₂ and FA coexistent system and followed by CaCl₂ alone, and the results well demonstrated the photodegradation efficiency trends of atrazine by nano-TiO₂ particles under the different sedimentation conditions.

SUBMITTER: Sun S

PROVIDER: S-EPMC6586927 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Laser synthesized TiO2-based nanoparticles and their efficiency in the photocatalytic degradation of linear carboxylic acids.

Project description:Titanium dioxide nanoparticles were synthesized by laser pyrolysis, their surface and electronic properties were modified by gold and/or nitrogen. These materials were characterized by different techniques like X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR). Time resolved conductivity (TRMC) was used to study the charge separation of electron/hole pairs. Altogether (XPS, EPR, TRMC), the physicochemical characterizations are well correlated with chemical photoactivity of the different samples. Their photocatalytic activity was evaluated for the degradation of linear carboxylic acids (C2-C3) under UV and visible illumination. The decomposition rate of acids was measured, it shows that the modification with gold increases the photoactivity while the presence of nitrogen slows down the process. Such observations are in good agreement with evolution of TRMC signals. A degradation pathway has been determined by identification of intermediate products by chromatography and EPR, results show different intermediate species. In particular EPR confirms the presence of NO2- paramagnetic centers and shows two novel N centered paramagnetic centers. A decrease of the degradation rate is observed with increase of carboxylic acid chain length.

| S-EPMC5678285 | biostudies-literature

Selective growth of Ti3+/TiO2/CNT and Ti3+/TiO2/C nanocomposite for enhanced visible-light utilization to degrade organic pollutants by lowering TiO2-bandgap.

Project description:A convenient route was developed for the selective preparation of two stable nanocomposites, Ti3+/TiO2/CNT (labeled as TTOC-1 and TTOC-3) and Ti3+/TiO2/carbon layer (labeled as TTOC-2), from the same precursor by varying the amount of single-walled carbon nanotubes used in the synthesis. TiO2 is an effective photocatalyst; however, its wide bandgap limits its usefulness to the UV region. As a solution to this problem, our prepared nanocomposites exhibit a small bandgap and wide visible-light (VL) absorption because of the introduction of carbonaceous species and Ti3+ vacancies. The photocatalytic efficiency of the nanocomposites was examined via the degradation of methylene blue dye under VL. Excellent photocatalytic activity of 83%, 98%, and 93% was observed for TTOC-1, TTOC-2, and TTOC-3 nanocomposites within 25 min. In addition, the photocatalytic degradation efficiency of TTOC-2 toward methyl orange, phenol, rhodamine B, and congo red was 28%, 69%, 71%, and 91%, respectively, under similar experimental conditions after 25 min. Higher reusability and structural integrity of the as-synthesized photocatalyst were confirmed within five consecutive runs by photocatalytic test and X-ray diffraction analysis, respectively. The resulting nanocomposites provide new insights into the development of VL-active and stable photocatalysts with high efficiencies.

| S-EPMC8096813 | biostudies-literature

Heterogeneous and efficient transesterification of Jatropha curcas L. seed oil to produce biodiesel catalysed by nano-sized SO4 2-/TiO2.

Project description:Developing high-efficiency hetero-catalysts for transesterification reaction is of great importance in the production of biodiesel from Jatropha curcas L. seed oil (JO). Here, we synthesized a series of sulfated TiO2 by treating with varying H2SO4 concentration (SO4 2-/TiO2) and TiO2 catalysts and applied to the transesterification of JO. Furthermore, these heterostructures were characterized by many characterization methods including XRD, FT-IR, N2-adsorption, SEM, TEM, TG, py-IR and NH3-TPD, and their catalytic performance was investigated under various operating conditions. The results reveal that both the Brønsted and Lewis acid sites are presented in the SO4 2-/TiO2 catalysts, while only Lewis-type sites are observed in the TiO2 catalyst. And the acid intensity, surface area and mesoporous volume of catalysts are improved obviously after treating TiO2 with sulfuric acid. Then the SO4 2-/TiO2 catalysts exhibit much higher catalytic activity than TiO2 catalyst, which is attributed to the larger surface area and mesoporous volume and stronger acidity. Furthermore, the reusability behaviour of 1.5 SO4 2-/TiO2 catalyst in the transesterification of JO was also studied.

| S-EPMC6281932 | biostudies-literature

Dual-FRET imaging of IP3 and Ca2+ revealed Ca2+-induced IP3 production maintains long lasting Ca2+ oscillations in fertilized mouse eggs.

Project description:In most species, fertilization induces Ca2+ transients in the egg. In mammals, the Ca2+ rises are triggered by phospholipase Cζ (PLCζ) released from the sperm; IP3 generated by PLCζ induces Ca2+ release from the intracellular Ca2+ store through IP3 receptor, termed IP3-induced Ca2+ release. Here, we developed new fluorescent IP3 sensors (IRIS-2s) with the wider dynamic range and higher sensitivity (Kd = 0.047-1.7 μM) than that we developed previously. IRIS-2s employed green fluorescent protein and Halo-protein conjugated with the tetramethylrhodamine ligand as fluorescence resonance energy transfer (FRET) donor and acceptor, respectively. For simultaneous imaging of Ca2+ and IP3, using IRIS-2s as the IP3 sensor, we developed a new single fluorophore Ca2+ sensor protein, DYC3.60. With IRIS-2s and DYC3.60, we found that, right after fertilization, IP3 concentration ([IP3]) starts to increase before the onset of the first Ca2+ wave. [IP3] stayed at the elevated level with small peaks followed after Ca2+ spikes through Ca2+ oscillations. We detected delays in the peak of [IP3] compared to the peak of each Ca2+ spike, suggesting that Ca2+-induced regenerative IP3 production through PLC produces small [IP3] rises to maintain [IP3] over the basal level, which results in long lasting Ca2+ oscillations in fertilized eggs.

| S-EPMC6423007 | biostudies-literature

Evolution of large area TiS2-TiO2 heterostructures and S-doped TiO2 nano-sheets on titanium foils.

Project description:We report a novel and facile method to synthesize sulfur-doped titanium oxide sheets and realize TiS2-TiO2 heterostructures by means of a sequential sulfurization and oxidation step in a dual-zone chemical vapor deposition furnace. The inclusion of chlorine and argon gases during the growth of such titanium-based compounds plays a critical role in the formation of desired geometries and crystalline structures. These heterostructures possess nano-whisker and nanosheet configurations, controlled by adjusting the growth parameters such as temperature, carrier gas and the sequencing between different steps of the growth. The evolution of these complex heterostructures has been investigated using Raman spectroscopy and EDS characterization. The presence of chlorine gas during the growth results in local TiS2 formation as well as faceted growth of TiO2 nanosheets through anatase to rutile phase change prohibition. The electron microscopy (TEM) images and diffraction pattern (SAED) characterization reveal the crystallinity and layered nature of grown structures, further demonstrating the 2D characteristics of S-doped nanosheets. The evolution of TiO2 on TiS2 heterostructures has also has been verified using XPS analysis. These highly featured nanostructures are suitable candidates to enhance the photocatalytic behavior of TiO2 nanostructures.

| S-EPMC6884512 | biostudies-literature

Tailored Interfaces of the Bulk Silicon Nanowire/TiO2 Heterojunction Promoting Enhanced Photovoltaic Performances.

Project description:We report significantly improved silicon nanowire/TiO2 n+-n heterojunction solar cells prepared by sol-gel synthesis of TiO2 thin film atop vertically aligned silicon nanowire arrays obtained by facile metal-assisted wet electroless chemical etching of a bulk highly doped n-type silicon wafer. As we show here, chemical treatment of the nanowire arrays prior to depositing the sol-gel precursor has dramatic consequences on the device performance. While hydrofluoric treatment to remove the native oxide already improves significantly the device performances, hydrobromic (HBr) treatment consistently yields by far the best device performances with power conversion efficiencies ranging between 4.2 and 6.2% with fill factors up to 60% under AM 1.5G illumination. In addition to yield high-quality and easy to produce solar cell devices, these findings regarding the surface treatment of silicon nanowires with HBr suggest that HBr could contribute to the enhancement of the device performance not only for solar cells but also for other optoelectronics devices based on semiconductor nanostructures.

| S-EPMC6642036 | biostudies-literature

Multifunctional TiO2 Nanotube-Matrix Composites with Enhanced Photocatalysis and Lithium-Ion Storage Performances.

Project description:As a multifunctional material, TiO2 shows excellent performance in catalytic degradation and lithium-ion storage. However, high electron-hole pair recombination, poor conductivity, and low theoretical capacity severely limit the practical application of TiO2. Herein, TiO2 nanotube (TiO2 NT) with a novel double-layer honeycomb structure were prepared by two-step electrochemical anodization. Honeycombed TiO2 NT arrays possess clean top surfaces and a long-range ordering, which greatly facilitates the preparation of high-performance binary and ternary materials. A binary TiO2 nanotube@Au nanoparticle (TiO2 NT@Au NP) composite accompanied by appropriately concentrated and uniformly distributed gold particles was prepared in this work. Interestingly, the TiO2 nanotube@Au nanoparticle (TiO2 NT@Au NP) composites not only showed the excellent catalytic degradation effect of methylene blue, but also demonstrated large lithium-ion storage capacity (310.6 μAh cm-2, 1.6 times of pristine TiO2 NT). Based on the realization of the controllable fabrication of binary TiO2 nanotube@MoS2 nanosheet (TiO2 NT@MoS2 NS) composite, ternary TiO2 nanotube@MoS2 nanosheet@Au nanoparticle (TiO2 NT@MoS2 NS@Au NP) composite with abundant defects and highly ordered structure was also innovatively designed and fabricated. As expected, the TiO2 NT@MoS2 NS@Au NP anode exhibits extremely high initial discharge specific capacity (487.4 μAh cm-2, 2.6 times of pristine TiO2 NT) and excellent capacity retention (81.0%).

| S-EPMC10096361 | biostudies-literature

Supercapacitive performance of TiO2 boosted by a unique porous TiO2/Ti network and activated Ti3.

Project description:TiO2 has been reported to have considerable capacity through appropriate surface modification. Previous studies of TiO2-based supercapacitors mainly focused on anodized TiO2 nanotubes and TiO2 powder, even though the capacitance still lags behind that of carbon-base materials. In this work, a three-dimensional porous TiO2/Ti (PTT) network was constructed by anodic oxidation and its capacitance was boosted by subsequent aluminum-reduction process. Activated Ti3+ was proved to be being successfully introduced into the surface of pristine PTT, resulting in the prominent enhancement of supercapacitive performance. An areal capacitance of 81.75 mF cm-2 was achieved from Al-reduced PTT (Al-PTT) at 500 °C in 1 M H2SO4 electrolyte, which was among the highest value of pure TiO2-based electrodes. Good electrochemical stability was also confirmed by the 3.12% loss of the highest capacity after 5000 CV cycles. More importantly, the activated Ti3+/Ti4+ redox couple in modified TiO2 is solidly confirmed by being directly observed in CV curves. The capacitive mechanism of the redox reaction is also studied by electrochemical tests. The construction of a 3D porous network structure and efficient Ti3+ introduction provide an effective method to boost the supercapacitive performance of TiO2-based materials for energy storage applications.

| S-EPMC9061586 | biostudies-literature

Boosting the Humidity Performances of Na0.5BixTiO3 by Tuning Bi Content.

Project description:In the field of humidity sensors, a major challenge is how to improve the sensing performance of existing materials. Based on our previous work on Na0.5Bi0.5TiO3, a facile strategy of tuning the Bi content in the material was proposed to improve its sensing performance. Na0.5BixTiO3 (x = 0.3, 0.35, 0.4, 0.45) nanocomposites were synthesized by a hydrothermal method. Humidity sensing properties of these nanocomposites were investigated in the relative humidity range of 11% to 95%. Our results show that, compared to the sensor based on nominally pure sample (Na0.5Bi0.5TiO3), the sensor based on Na0.5Bi0.35TiO3 exhibits boosted sensing performance of excellent linear humidity response in the humidity range of 11-75% relative humidity, lower hysteresis value, and faster response/recovery time. The improvement of the sensing performance was argued to be the reason that the proper reduction in Bi content leads to a minimum value of oxygen-vacancy concentrations, thereby weakening the chemical adsorption but enhancing the physical adsorption. These results indicate that the proper underdose of the Bi content in Na0.5Bi0.5TiO3 can greatly boost the sensing performance.

| S-EPMC9315792 | biostudies-literature

Thermophysiological comfort of sonochemically synthesized nano TiO2 coated woven fabrics.

Project description:This work investigates thermophysiological comfort properties of sonochemically synthesized nano TiO2 coated cotton and polyester woven fabrics. The obtained results were analysed on heat and mass transfer basis. Moisture management tester and Alambeta were utilised for moisture transportation and thermal evaluation. This study precisely investigates the effects of sonication on surface roughness of nano TiO2 coated and uncoated samples. Ultrasonic acoustic method was applied to imbibe nano TiO2 on fabric samples. Surface topography, morphology and the existence of nano TiO2 on investigated samples were analysed by scanning electron microscopy and inductively coupled plasma atomic emission spectroscopy. In addition, standard test methods were applied to estimate physical and thermophysiological comfort properties i.e. thermal resistance, thermal diffusivity, heat flow, wetting time and accumulative one-way transport index of uncoated and nano TiO2 coated samples.

| S-EPMC7560843 | biostudies-literature