Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Data for benchmarking low-cost, 3D printed prosthetic hands.

ABSTRACT: In this article, three different data sets are presented to evaluate a representative of openly accessible 3D printed prosthetic hand. The first data set includes grasping force measurements of human hand and low-cost 3D printed hand. Three grasping functions were evaluated, spherical, cylindrical, and precision grasps. The experimental test was performed using a wearable tactile sensor. The second data set includes the numerical analysis of prosthetic fingers made from Acrylonitrile Butadiene Styrene (ABS) and Polylactic Acid (PLA) materials under different carrying loads. The numerical analyses were carried out by LS-DYNA software. The files can be used for the prosthetic fingers' evaluation and for the selection of suitable material. The third data set includes the experimental tensile test of ABS and PLA materials. The mechanical properties were calculated from the results, which can be used in the design and fabrication of products from these materials. All the datasets are available from Harvard Dataverse: https://doi.org/10.7910/DVN/GCPAIL.

SUBMITTER: Alkhatib F

PROVIDER: S-EPMC6610678 | biostudies-literature | 2019 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Data for benchmarking low-cost, 3D printed prosthetic hands.

Alkhatib Farah F Cabibihan John-John JJ Mahdi Elsadig E

Data in brief 20190622

In this article, three different data sets are presented to evaluate a representative of openly accessible 3D printed prosthetic hand. The first data set includes grasping force measurements of human hand and low-cost 3D printed hand. Three grasping functions were evaluated, spherical, cylindrical, and precision grasps. The experimental test was performed using a wearable tactile sensor. The second data set includes the numerical analysis of prosthetic fingers made from Acrylonitrile Butadiene S ...[more]

PMID: 31312702

Similar Datasets

Suitability of the Openly Accessible 3D Printed Prosthetic Hands for War-Wounded Children.

Project description:The field of rehabilitation and assistive devices is being disrupted by innovations in desktop 3D printers and open-source designs. For upper limb prosthetics, those technologies have demonstrated a strong potential to aid those with missing hands. However, there are basic interfacing issues that need to be addressed for long term usage. The functionality, durability, and the price need to be considered especially for those in difficult living conditions. We evaluated the most popular designs of body-powered, 3D printed prosthetic hands. We selected a representative sample and evaluated its suitability for its grasping postures, durability, and cost. The prosthetic hand can perform three grasping postures out of the 33 grasps that a human hand can do. This corresponds to grasping objects similar to a coin, a golf ball, and a credit card. Results showed that the material used in the hand and the cables can withstand a 22 N normal grasping force, which is acceptable based on standards for accessibility design. The cost model showed that a 3D printed hand could be produced for as low as $19. For the benefit of children with congenital missing limbs and for the war-wounded, the results can serve as a baseline study to advance the development of prosthetic hands that are functional yet low-cost.

| S-EPMC7830517 | biostudies-literature

Low-cost sensor-integrated 3D-printed personalized prosthetic hands for children with amniotic band syndrome: A case study in sensing pressure distribution on an anatomical human-machine interface (AHMI) using 3D-printed conformal electrode arrays.

Project description:Interfacing anatomically conformal electronic components, such as sensors, with biology is central to the creation of next-generation wearable systems for health care and human augmentation applications. Thus, there is a need to establish computer-aided design and manufacturing methods for producing personalized anatomically conformal systems, such as wearable devices and human-machine interfaces (HMIs). Here, we show that a three-dimensional (3D) scanning and 3D printing process enabled the design and fabrication of a sensor-integrated anatomical human-machine interface (AHMI) in the form of personalized prosthetic hands that contain anatomically conformal electrode arrays for children affected by amniotic band syndrome, a common birth defect. A methodology for identifying optimal scanning parameters was identified based on local and global metrics of registered point cloud data quality. This method identified an optimal rotational angle step size between adjacent 3D scans. The sensitivity of the optimization process to variations in organic shape (i.e., geometry) was examined by testing other anatomical structures, including a foot, an ear, and a porcine kidney. We found that personalization of the prosthetic interface increased the tissue-prosthesis contact area by 408% relative to the non-personalized devices. Conformal 3D printing of carbon nanotube-based polymer inks across the personalized AHMI facilitated the integration of electronic components, specifically, conformal sensor arrays for measuring the pressure distribution across the AHMI (i.e., the tissue-prosthesis interface). We found that the pressure across the AHMI exhibited a non-uniform distribution and became redistributed upon activation of the prosthetic hand's grasping action. Overall, this work shows that the integration of 3D scanning and 3D printing processes offers the ability to design and fabricate wearable systems that contain sensor-integrated AHMIs.

| S-EPMC6438526 | biostudies-literature

A 3D Printed Device for Low Cost Neural Stimulation in Mice.

Project description:Electrical stimulation of the brain through the implantation of electrodes is an effective treatment for certain diseases and the focus of a large body of research investigating new cell mechanisms, neurological phenomena, and treatments. Electrode devices developed for stimulation in rodents vary widely in size, cost, and functionality, with the majority of recent studies presenting complex, multi-functional designs. While some experiments require these added features, others are in greater need of reliable, low cost, and readily available devices that will allow surgeries to be scheduled and completed without delay. In this work, we utilize 3D printing and common electrical hardware to produce an effective 2-channel stimulation device that meets these requirements. Our stimulation electrode has not failed in over 60 consecutive surgeries, costs less than $1 USD, and can be assembled in less than 20 min. 3D printing minimizes the amount of material used in manufacturing the device and enables one to match the curvature of the connector's base with the curvature of the mouse skull, producing an ultra-lightweight, low size device with improved adhesion to the mouse skull. The range of the stimulation parameters used with the proposed device was: pulse amplitude 1-200 μA, pulse duration 50-500 μs and pulse frequency 1-285 Hz.

| S-EPMC6682623 | biostudies-literature

Assessment of 3D printed mechanical metamaterials for prosthetic liners.

Project description:This study focuses on novel design and evaluation of Elastic 50A (EL50) mechanical metamaterials with open-cell patterns for its potential application to lower limb residuum/socket interfaces, specifically that of a transtibial (TT) amputee. Mechanical characteristics, that is, effective Young's modulus (E), was tuned by altering metamaterial porosity, which was experimentally verified. Specifically, pore radius of the unit cell was varied to achieve a range of E-values (0.05-1.71 MPa) for these 3D printed metamaterials. Finite Element Analysis (FEA) was conducted to evaluate pressure distribution across key load-bearing anatomical sites of a TT residuum. Using designed metamaterials for homogeneous liners, pressure profiles were studied and compared with a silicone liner case. Additionally, a custom metamaterial liner was designed by assigning appropriate metamaterials to four load-sensitive and tolerant anatomical sites of the TT residuum. The results suggest that lowest pressure variation (PV), as a measure of pressure distribution levels and potential comfort for amputees, was achieved by the custom metamaterial liner compared to any of the homogeneous liners included in this study. It is envisaged that this work may aid future design and development of custom liners using now commonly available 3D printing technologies and available elastomer materials to maximise comfort, tissue safety and overall rehabilitation outcomes for lower limb amputees.

| S-EPMC10941651 | biostudies-literature

Low-cost FDM 3D-printed modular electrospray/electrospinning setup for biomedical applications.

Project description:Here, we report on the inexpensive fabrication of an electrospray/electrospinning setup by fused deposition modelling (FDM) 3D printing and provide the files and parameters needed to print this versatile device. Both electrospray and electrospinning technologies are widely used for pharmaceutical, healthcare and bioengineering applications. The setup was designed to be modular, thus its parts can be exchanged easily. The design provides a safe setup, ensuring that the users are not exposed to the high voltage parts of the setup. PLA, PVA, and a thermoplastic elastomer filament were used for the 3D printing. The filament cost was $100 USD and the rig was printed in 6 days. An Ultimaker 3 FDM 3D printer was used with dual print heads, and the PVA was used as a water-soluble support structure. The end part of the setup had several gas channels, allowing a uniform gas flowing against the direction of the nanoparticles/nanofibers, enhancing the drying process by enhancing the evaporation rate. The setup was tested in both electrospray and electrospinning modes successfully. Both the .sldprt and .stl files are provided for free download.

| S-EPMC7333274 | biostudies-literature

Low-Cost Microplate Reader with 3D Printed Parts for under 500 USD.

Project description:A 96-well microplate reader for absorption spectroscopy was designed, constructed, and tested at a total cost of ca. 500 USD. The reduced cost of the device represents the major technical contribution of this manuscript, as costs were reduced 7 fold from previous reports. The device was able to achieve 3σ limits of detection of ca. 0.01 absorbance units (AU) over a 60 second measurement for the mid-visible wavelength range. Component parts are either commercially available, or 3D printed from plans. Analysis wavelength can be altered throughout the visible region through use of various photographic or theatrical filters. This feature allows the well plate reader to be used for typical laboratory assays such as cell population estimation by optical density (OD) at 600 nm, or enzyme-linked immunosorbent assays (ELISA) at 450 nm. This manuscript reports on the motivation and process of constructing the device, lists required parts, presents data demonstrating device function, and provides the community of scholars with plans to reproduce the work. The device can be reproduced in laboratories lacking sufficient resources to purchase commercially available options and this outcome contributes towards empowerment of individuals and equity of scientific enquiry.

| S-EPMC9103534 | biostudies-literature

3D Printed UV-Visible Cuvette Adapter for Low-Cost and Versatile Spectroscopic Experiments.

Project description:Ultraviolet-visible (UV-vis) spectroscopy represents one of the most popular analytical techniques in chemical research labs. A variety of vendors provide instruments that are suited for the analysis of liquid samples at moderate concentrations. However, to accommodate more specialized experiments, expensive accessories are required and often do not fit the specific needs of experimental scientists. In this work, we present a generalized adapter that can be 3D printed and used with existing spectrometers to enable a wide array of experiments to be performed. In the case of liquid samples, we provide a method for dramatically reducing the price of a quartz cuvette with minimal impact on performance. Through simple modification of the design, cuvettes with various path lengths can be prepared. Additionally, we illustrate the ability to turn any sample container into a working cuvette to simplify experimental protocols, prevent contamination risks, and further reduce costs. This strategy also enables gaseous and solid samples to be evaluated easily and reproducibly. Furthermore, we demonstrate how this concept can be extended to interface additional instrumentation with a commercial UV-vis spectrometer. All of the digital designs are provided under a creative commons license to enable other researchers to modify and adapt the designs for their unique experimental requirements.

| S-EPMC6644542 | biostudies-literature

Development of a Low-Cost EEG-Controlled Hand Exoskeleton 3D Printed on Textiles.

Project description:Stroke survivors can be affected by motor deficits in the hand. Robotic equipment associated with brain-machine interfaces (BMI) may aid the motor rehabilitation of these patients. BMIs involving orthotic control by motor imagery practices have been successful in restoring stroke patients' movements. However, there is still little acceptance of the robotic devices available, either by patients and clinicians, mainly because of the high costs involved. Motivated by this context, this work aims to design and construct the Hand Exoskeleton for Rehabilitation Objectives (HERO) to recover extension and flexion movements of the fingers. A three-dimensional (3D) printing technique in association with textiles was used to produce a lightweight and wearable device. 3D-printed actuators have also been designed to reduce equipment costs. The actuator transforms the torque of DC motors into linear force transmitted by Bowden cables to move the fingers passively. The exoskeleton was controlled by neuroelectric signal-electroencephalography (EEG). Concept tests were performed to evaluate control performance. A healthy volunteer was submitted to a training session with the exoskeleton, according to the Graz-BCI protocol. Ergonomy was evaluated with a two-dimensional (2D) tracking software and correlation analysis. HERO can be compared to ordinary clothing. The weight over the hand was around 102 g. The participant was able to control the exoskeleton with a classification accuracy of 91.5%. HERO project resulted in a lightweight, simple, portable, ergonomic, and low-cost device. Its use is not restricted to a clinical setting. Thus, users will be able to execute motor training with the HERO at hospitals, rehabilitation clinics, and at home, increasing the rehabilitation intervention time. This may support motor rehabilitation and improve stroke survivors life quality.

| S-EPMC8267155 | biostudies-literature

A versatile and customizable low-cost 3D-printed open standard for microscopic imaging.

Project description:Modern microscopes used for biological imaging often present themselves as black boxes whose precise operating principle remains unknown, and whose optical resolution and price seem to be in inverse proportion to each other. With UC2 (You. See. Too.) we present a low-cost, 3D-printed, open-source, modular microscopy toolbox and demonstrate its versatility by realizing a complete microscope development cycle from concept to experimental phase. The self-contained incubator-enclosed brightfield microscope monitors monocyte to macrophage cell differentiation for seven days at cellular resolution level (e.g. 2 μm). Furthermore, by including very few additional components, the geometry is transferred into a 400 Euro light sheet fluorescence microscope for volumetric observations of a transgenic Zebrafish expressing green fluorescent protein (GFP). With this, we aim to establish an open standard in optics to facilitate interfacing with various complementary platforms. By making the content and comprehensive documentation publicly available, the systems presented here lend themselves to easy and straightforward replications, modifications, and extensions.

| S-EPMC7688980 | biostudies-literature

A practical 3D-printed soft robotic prosthetic hand with multi-articulating capabilities.

Project description:Soft robotic hands with monolithic structure have shown great potential to be used as prostheses due to their advantages to yield light weight and compact designs as well as its ease of manufacture. However, existing soft prosthetic hands design were often not geared towards addressing some of the practical requirements highlighted in prosthetics research. The gap between the existing designs and the practical requirements significantly hampers the potential to transfer these designs to real-world applications. This work addressed these requirements with the consideration of the trade-off between practicality and performance. These requirements were achieved through exploiting the monolithic 3D printing of soft materials which incorporates membrane enclosed flexure joints in the finger designs, synergy-based thumb motion and cable-driven actuation system in the proposed hand prosthesis. Our systematic design (tentatively named X-Limb) achieves a weight of 253gr, three grasps types (with capability of individual finger movement), power-grip force of 21.5N, finger flexion speed of 1.3sec, a minimum grasping cycles of 45,000 (while maintaining its original functionality) and a bill of material cost of 200 USD (excluding quick disconnect wrist but without factoring in the cost reduction through mass production). A standard Activities Measure for Upper-Limb Amputees benchmark test was carried out to evaluate the capability of X-Limb in performing grasping task required for activities of daily living. The results show that all the practical design requirements are satisfied, and the proposed soft prosthetic hand is able to perform all the real-world grasping tasks of the benchmark tests, showing great potential in improving life quality of individuals with upper limb loss.

| S-EPMC7224508 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data