PH-Tunable Fluorescence and Photochromism of a Flavylium-Based MCM-41 Pigment.
Ontology highlight
ABSTRACT:
SUBMITTER: Gago S
PROVIDER: S-EPMC6640939 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Magnetic iron oxide containing MCM-41 silica (MM) with ~300 nm particle size was developed. The MM material before or after template removal was modified with NH2- or COOH-groups and then grafted with PEG chains. The anticancer drug tamoxifen was loaded into the organic groups' modified and PEGylated nanoparticles by an incipient wetness impregnation procedure. The amount of loaded drug and the release properties depend on whether modification of the nanoparticles was performed before or after the template removal step. The parent and drug-loaded samples were characterized by XRD, N2 physisorption, thermal gravimetric analysis, and ATR FT-IR spectroscopy. ATR FT-IR spectroscopic data and density functional theory (DFT) calculations supported the interaction between the mesoporous silica surface and tamoxifen molecules and pointed out that the drug molecule interacts more strongly with the silicate surface terminated by silanol groups than with the surface modified with carboxyl groups. A sustained tamoxifen release profile was obtained by an in vitro experiment at pH = 7.0 for the PEGylated formulation modified by COOH groups after the template removal. Free drug and formulated tamoxifen samples were further investigated for antiproliferative activity against MCF-7 cells.
| S-EPMC7663855 | biostudies-literature
Project description:MCM-41 was prepared through the sol-gel method and encapsulated by polydopamine (PDA) before being coordinated with metal ions to form a highly efficient sustained release system (M-PDA-MCM-41) for triazolone delivery. The characterization results confirmed the existence of the coordination bond between the PDA layer and triazolone through the bridge effect from metal ions, which enhanced the interaction between PDA-MCM-41 and triazolone. The adsorption capacity of Fe-PDA-MCM-41 increased up to 173 mg g-1, which was 160% more than that of MCM-41. The sustained release performance of M-PDA-MCM-41 in different pH values was investigated. Under the conditions of pH ≤7, the release speed of triazolone increased with pH decreasing, whereas its release speed in the weak base condition was slower than in the neutral condition. Therefore, the as-synthesized system showed significant pH-sensitivity in the sustained release process, indicating that the sustained release system can be well stored in the neutral or basic environment and activated in the acid environment. Their sustained release curves described by the Korsmeyer-Peppas equation at pH 7 showed the same behaviour, indicating that PDA decoration or metal ion coordination only increases the steric hindrance and the interaction between carrier and triazolone instead of changing the original structure of the pure MCM material in accordance with X-ray diffraction and Brunauer-Emmett-Teller analysis results.
| S-EPMC6083694 | biostudies-literature
Project description:Tunable, ultra-pH responsive fluorescent nanoparticles with multichromatic emissions are highly valuable in a variety of biological studies, such as endocytic trafficking, endosome/lysosome maturation, and pH regulation in subcellular organelles. Small differences (e.g., <1 pH unit) and yet finely regulated physiological pH inside different endocytic compartments present a huge challenge to the design of such a system. Herein, we report a general strategy to produce pH-tunable, highly activatable multicolored fluorescent nanoparticles using commonly available pH-insensitive dyes with emission wavelengths from green to near IR range. The primary driving force of fluorescence activation between the ON (unimer) and OFF (micelle) states is the pH-induced micellization. Among three possible photochemical mechanisms, homo Förster resonance energy transfer (homoFRET)-enhanced decay was found to be the most facile strategy to render ultra-pH response over the H-dimer and photoinduced electron transfer (PeT) mechanisms. Based on this insight, we selected several fluorophores with small Stoke shifts (<40 nm) and established a panel of multicolored nanoparticles with wide emission range (500-820 nm) and different pH transitions. Each nanoparticle maintained the sharp pH response (ON/OFF < 0.25 pH unit) with corresponding pH transition point at pH 5.2, 6.4, 6.9, and 7.2. Incubation of a mixture of multicolored nanoparticles with human H2009 lung cancer cells demonstrated sequential activation of the nanoparticles inside endocytic compartments directly correlating with their pH transitions. This multicolored, pH-tunable nanoplatform offers exciting opportunities for the study of many important cell physiological processes, such as pH regulation and endocytic trafficking of subcellular organelles.
| S-EPMC3427786 | biostudies-literature
Project description:This study aims to produce ethylene using the calcium carbide route, acetylene from calcium carbide and then selective hydrogenation of the high-concentration acetylene to ethylene. A series of catalysts with different supports, such as Al2O3, SiO2 and MCM-41, were prepared using the ethylene glycol reduction method and their catalytic properties for high-concentration acetylene hydrogenation of calcium carbide to ethylene were studied by transmission electron microscopy, X-ray powder diffraction and thermogravimetry, among others. The results show that the small particle size and uniform dispersion of palladium (Pd) particles in the Pd/MCM-41 catalyst produced the highest ethylene yield of 62.09%. Then, the conditions for the basic reaction, such as reaction temperature and space velocity, were optimized using MCM-41 as a support. The yield of ethylene after condition optimization was as high as 82.87%, while the loading of Pd was 0.1%.
| S-EPMC6894548 | biostudies-literature
Project description:Fe-MCM-41 materials were prepared by different methods. The Fe was both incorporated into the structure and formed crystallites attached to the silica. High Fe content MCM-41 (~16 wt%) with retention of mesoporosity and long-range order was achieved by a range of new synthetic methodologies: (i) by delaying the addition of Fe3+(aq) to the stirred synthesis gel by 2 h, (ii) by addition of Fe3+ precursor as a freshly-precipitated aqueous slurry, (iii) by exploiting a secondary synthesis with Si-MCM-41 as SiO2 source. For comparative purposes the MCM-41 was also prepared by incipient wetness impregnation (IWI). Although all these synthesis methods preserved mesoporosity and long-range order of the SiO2 matrix, the hydrothermally-fabricated Fe materials prepared via the secondary synthesis route has the most useful properties for exploitation as a catalyst, in terms of hydrothermal stability of the resulting support. Temperature-programmed reduction (TPR) studies revealed a three-peak reduction pattern for this material instead of the commonly observed two-peak reduction pattern. The three peaks showed variable intensity that related to the presence of two components: crystalline Fe2O3 and Fe embedded in the SiO2 matrix (on the basis of ESR studies). The role of secondary synthesis of Si-MCM-41 on the iron reducibility was also demonstrated in IWI of sec-Si-MCM-41.
| S-EPMC5513583 | biostudies-literature
Project description:Boron-based catalysts for oxidative dehydrogenation of propane (ODHP) have displayed excellent olefin selectivity. However, the drawback of deboronation leading to catalyst deactivation limited their scalable applications. Hereby, a series of mesoporous B-MCM-41 (BM-x, B/Si = 0.015-0.147) catalysts for ODHP were prepared by a simple hydrothermal synthesis method. It was found that propane conversion was increased and the initial reaction temperature was reduced with an increase of boron content, and the optimal values appeared on BM-2.0 (B/Si = 0.062), while olefins' (ethylene and propylene) selectivity was maintained at ca. 70-80%. Most importantly, BM-1.0 (B/Si = 0.048) exhibited favorable activity, stability, and water tolerance after washing treatment or long-time operation (e.g., propane conversion of ca. 15% and overall olefin selectivity of ca. 80% at 550 °C) because its high structural stability prevented boron leaches. These features were identified by X-ray diffraction (XRD), N2 physisorption, inductively coupled plasma-mass spectrometry (ICP-MS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and solid-state magic-angle-spinning nuclear magnetic resonance (MAS NMR) spectroscopy studies. The tri-coordinated B-OH species incorporated into the mesoporous silica framework are considered to be the active sites for ODHP.
| S-EPMC8793070 | biostudies-literature
Project description:Membrane separators are one of the critical components in zinc-air batteries (ZABs). In the control of mass transfer, and hence, electrochemical reaction, membrane separators have an important role to play. This work addresses the issue of battery performance in a ZAB via a new composite membrane separator based on polyvinyl alcohol (PVA). To enhance the electrolyte uptake and ionic conductivity, mesoporous Mobil Composition of Matter No. 41 (MCM-41) is incorporated as a filler in the membrane while maintaining its integrity. The presence of MCM-41 is seen to reduce the number of cycles of secondary ZABs due to the uninvited drawbacks of increased zincate crossover and reduced triple phase boundary at the air cathode, which is pivotal for oxygen reduction reaction. Overall, results suggest that the application of the MCM-41/PVA composite has the potential for use as a separator in high-capacity primary ZABs.
| S-EPMC7582340 | biostudies-literature
Project description:The adsorption of three typical polycyclic aromatic hydrocarbons (PAHs), naphthalene, phenanthrene, and pyrene with different ring numbers, on a common mesoporous material (MCM-41) was simulated based on a well-validated model. The adsorption equilibriums (isotherms), states (angle distributions and density profiles), and interactions (radial distribution functions) of three PAHs within the mesopores were studied in detail. The results show that the simulated isotherms agreed with previous experimental results. Each of the PAHs with flat molecules showed an adsorption configuration that was parallel to the surface of the pore, in the following order according to the degree of arrangement: pyrene (Pyr) > phenanthrene (Phe) > naphthalene (Nap). In terms of the interaction forces, there were no hydrogen bonds or other strong polar forces between the PAHs and MCM-41, and the O⁻H bond on the adsorbent surface had a unique angle in relation to the PAH molecular plane. The polarities of different H atoms on the PAHs were roughly the same, while those of the C atoms on the PAHs decreased from the molecular centers to the edges. The increasing area of the π-electron plane on the PAHs with the increasing ring number could lead to stronger adsorption interactions, and thus a shorter distance between the adsorbate and the adsorbent.
| S-EPMC6387010 | biostudies-literature
Project description:BackgroundEach of the three individual components of the CMG complex (Cdc45, MCM and GINS) is essential for chromosomal DNA replication in eukaryotic cells, both for the initiation of replication at origins and also for normal replication fork progression. The MCM complex is a DNA helicase that most likely functions as the catalytic core of the replicative helicase, unwinding the parental duplex DNA ahead of the moving replication fork, whereas Cdc45 and the GINS complex are believed to act as accessory factors for MCM.ResultsTo investigate interactions between components of the CMG complex, we have used bimolecular fluorescence complementation (BiFC) in the fission yeast Schizosaccharomyces pombe for the first time, to analyse protein-protein interactions between GINS and MCM subunits expressed from their native chromosomal loci. We demonstrate interactions between GINS and MCM in the nuclei of exponentially-growing fission yeast cells and on chromatin in binucleate S-phase cells. In addition we present evidence of MCM-MCM interactions in diploid fission yeast cells. As with GINS-MCM interactions, MCM-MCM interactions also occur on chromatin in S-phase cells.ConclusionBimolecular fluorescence complementation can be used in fission yeast to visualise interactions between two of the three components of the CMG complex, offering the prospect that this technique could in the future be used to allow studies on replication protein dynamics in living S. pombe cells.
| S-EPMC2652428 | biostudies-literature
Project description:Because of the preferential butanol selectivity of some ionic liquids (ILs), an increasing amount of research has appeared regarding their application in butanol separation. In this research, two ionic liquids, namely, 1-ethyl-3-vinylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([EVIM][Tf2N], IL1) and N-octyl-pyridinium bis[(trifluoromethyl)sulfonyl]imide ([OMPY][Tf2N], IL2), were applied to modify a mesoporous molecular sieve MCM-41. The IL-modified MCM-41 samples were characterized by XPS, BET, XRD, SEM and TEM. The ionic liquid-modified MCM-41 was incorporated into the polymer PEBA to prepare mixed matrix membranes to study the influences of the filling of IL-modified MCM-41 and operating conditions on the performance of the mixed matrix membrane for butanol pervaporation. The results indicated that the pervaporation performance of the PEBA membrane was enhanced by the incorporation of IL-modified MCM-41. When the temperature of the feeding liquid was 35°C and the mass fraction of butanol was 2.5 wt%, the 5% MCM-41-IL2-PEBA membrane showed a permeation flux of 421.7 g m-2 h-1 and a separation factor of 25.4. The permeation flux and the separation factor of the membrane increased as the temperature of the feeding liquid increased. The results of the long-period experiment suggested that the 5% MCM-41-IL2-PEBA membrane exhibited high stability within 100 h of operation.
| S-EPMC6689585 | biostudies-literature