Browse
Submit Data
Databases
API
Help

Dataset Information

31 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Novel and Stable D-A-π-A Dyes for Efficient Solid-State Dye-Sensitized Solar Cells.

ABSTRACT: Two novel organic donor-acceptor-π-acceptor sensitizers, W7 and W8, have been applied in efficient solid-state dye-sensitized solar cells (ssDSSCs). Using 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenyl-amine) 9,9'-spirobifluorene (Spiro-OMeTAD) as hole-transport material (HTM), an excellent power conversion efficiency of 6.9% was recorded for W7, together with an excellent photocurrent of 10.51 mA cm^-2 and a high open-circuit voltage of 880 mV under standard AM 1.5 G illumination (100 mW cm^-2). The solid-state solar cells based on W8 showed an efficiency of 5.2%, with a good photocurrent of 9.55 mA cm^-2 and an open-circuit voltage of 870 mV. Compared to that of the well-known WS2 sensitizer, the results show that the performance of the ssDSSC devices can be significantly improved by introducing triphenylamine moiety into their structure. In addition, results of photoinduced absorption spectroscopy show efficient dye regeneration for W7- and W8-based devices. A higher hole conductivity of the W7/HTM and W8/HTM layers compared to that of the WS2/HTM layer was observed, indicating an efficient charge transfer at the interfaces. The results obtained offer insights into the design of reliable and highly efficient ssDSSCs for large-scale applications.

SUBMITTER: Liu P

PROVIDER: S-EPMC6640992 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Erratum: Novel and Stable D-A-π-A Dyes for Efficient Solid-State Dye-Sensitized Solar Cells.

Project description:[This corrects the article DOI: 10.1021/acsomega.7b00067.].

| S-EPMC6645414 | biostudies-literature

Highly efficient plastic crystal ionic conductors for solid-state dye-sensitized solar cells.

Project description:We have developed highly efficient, ambient temperature, solid-state ionic conductors (SSICs) for dye-sensitized solar cells (DSSCs) by doping a molecular plastic crystal, succinonitrile (SN), with trialkyl-substituted imidazolium iodide salts. High performance SSICs with enhanced ionic conductivity (2-4?mScm?¹) were obtained. High performance solid-state DSSCs with power conversion efficiency of 7.8% were fabricated using our SSICs combined with unique hierarchically nanostructured TiO? sphere (TiO?-SP) photoelectrodes; these electrodes have significant macroporosity, which assists penetration of the solid electrolyte into the electrode. The performance of our solid-state DSSCs is, to the best of our knowledge, the highest reported thus far for cells using plastic crystal-based SSICs, and is comparable to that of the state-of-the-art DSSCs which use ionic liquid type electrolytes. This report provides a logical strategy for the development of efficient plastic crystal-based SSICs for DSSCs and other electrochemical devices.

| S-EPMC3865487 | biostudies-literature

Efficient and Stable Fiber Dye-Sensitized Solar Cells Based on Solid-State Li-TFSI Electrolytes with 4-Oxo-TEMPO Derivatives.

Project description:Fiber-shaped dye-sensitized solar cells (FDSSCs) with flexibility, weavablity, and wearability have attracted intense scientific interest and development in recent years due to their low cost, simple fabrication, and environmentally friendly operation. Since the Grätzel group used the organic radical 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) as the redox system in dye-sensitized solar cells (DSSCs) in 2008, TEMPO has been utilized as an electrolyte to further improve power conversion efficiency (PCE) of solar cells. Hence, the TEMPO with high catalyst oxidant characteristics was developed as a hybrid solid-state electrolyte having high conductivity and stability structure by being integrated with a lithium bis(trifluoromethanesulfonyl)imide (Li-TFSI) film for FDSSCs. The optimized 4-Oxo TEMPO (OX) based solid-state FDSSC (SS-FDSSC) showed the PCE of up to 6%, which was improved by 34.2% compared to that of the reference device with 4.47%. The OX-enhanced SS-FDSSCs reduced a series resistance (Rs) resulting in effective electron extraction with improved short-circuit current density (JSC), while increasing a shunt resistance (Rsh) to prevent the recombination of photo-excited electrons. The result is an improvement in a fill factor (FF) and consequently a higher value for the PCE.

| S-EPMC9267960 | biostudies-literature

Efficient synthesis of triarylamine-based dyes for p-type dye-sensitized solar cells.

Project description:The class of triarylamine-based dyes has proven great potential as efficient light absorbers in inverse (p-type) dye sensitized solar cells (DSSCs). However, detailed investigation and further improvement of p-type DSSCs is strongly hindered by the fact that available synthesis routes of triarylamine-based dyes are inefficient and particularly demanding with regard to time and costs. Here, we report on an efficient synthesis strategy for triarylamine-based dyes for p-type DSSCs. A protocol for the synthesis of the dye-precursor (4-(bis(4-bromophenyl)amino)benzoic acid) is presented along with its X-ray crystal structure. The dye precursor is obtained from the commercially available 4(diphenylamino)benzaldehyde in a yield of 87% and serves as a starting point for the synthesis of various triarylamine-based dyes. Starting from the precursor we further describe a synthesis protocol for the dye 4-{bis[4'-(2,2-dicyanovinyl)-[1,1'-biphenyl]-4-yl]amino}benzoic acid (also known as dye P4) in a yield of 74%. All synthesis steps are characterized by high yields and high purities without the need for laborious purification steps and thus fulfill essential requirements for scale-up.

| S-EPMC4872536 | biostudies-literature

Novel D-A-π-A-Type Organic Dyes Containing a Ladderlike Dithienocyclopentacarbazole Donor for Effective Dye-Sensitized Solar Cells.

Project description:A novel ladderlike fused-ring donor, dithienocyclopentacarbazole (DTCC) derivative, is used to design and synthesize three novel donor-acceptor-π-acceptor-type organic dyes (C1-C3) via facile direct arylation reactions, in which the DTCC derivative substituted by four p-octyloxyphenyl groups is served as the electron donor and the carboxylic acid group is used as the electron acceptor or anchoring group. To fine-tune the optical, electrochemical, and photovoltaic properties of the three dyes, various auxiliary acceptors, including benzo[2,1,3]thiadiazole (BT), 5,6-difluorobenzo[2,1,3]thiadiazole (DFBT), and pyridal[2,1,3]thiadiazole (PT), are incorporated into the dye backbones. The results indicate that all of the three dyes exhibit strong light-capturing ability in the visible region and obtain relatively high molar extinction coefficients (>31 000 M-1 cm-1) due to their strong charge transfer (CT) from donor to acceptor. Moreover, theoretical model calculations demonstrate fully separated highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels for the three dyes, which is helpful for efficient charge separation and electron injection. Using the three dyes as sensitizers, conventional dye-sensitized solar cells (DSSCs) based on liquid iodide/triiodide redox electrolytes are fabricated. Our results indicate that the BT-containing dye C1 affords the highest power conversion efficiency of up to 6.75%, much higher than that of the DFBT-containing dye C2 (5.40%) and the PT-containing dye C3 (1.85%). To our knowledge, this is the first example reported in the literature where the DTCC unit has been used to develop novel organic dyes for DSSC applications. Our work unambiguously demonstrates that the ladderlike DTCC derivatives are the superb electron-donating blocks for the development of high-performance organic dyes.

| S-EPMC6645438 | biostudies-literature

Tailoring of energy levels in D-π-A organic dyes via fluorination of acceptor units for efficient dye-sensitized solar cells.

Project description:A molecular design is presented for tailoring the energy levels in D-π-A organic dyes through fluorination of their acceptor units, which is aimed at achieving efficient dye-sensitized solar cells (DSSCs). This is achieved by exploiting the chemical structure of common D-π-A organic dyes and incorporating one or two fluorine atoms at the ortho-positions of the cyanoacetic acid as additional acceptor units. As the number of incorporated fluorine atoms increases, the LUMO energy level of the organic dye is gradually lowered due to the electron-withdrawing effect of fluorine, which ultimately results in a gradual reduction of the HOMO-LUMO energy gap and an improvement in the spectral response. Systematic investigation of the effects of incorporating fluorine on the photovoltaic properties of DSSCs reveals an upshift in the conduction-band potential of the TiO2 electrode during impedance analysis; however, the incorporation of fluorine also results in an increased electron recombination rate, leading to a decrease in the open-circuit voltage (Voc). Despite this limitation, the conversion efficiency is gradually enhanced as the number of incorporated fluorine atoms is increased, which is attributed to the highly improved spectral response and photocurrent.

| S-EPMC4296309 | biostudies-literature

Recovering degraded quasi-solid-state dye-sensitized solar cells by applying electrical pulses.

Project description:We discovered a method of applying a forward pulsed bias to recover the degraded quasi-solid-state dye-sensitized solar cells (DSSCs). Up to 30.7% of the power conversion efficiency (?) of a degraded poly(vinylidene fluoride) (PVDF) based DSSC was recovered by a double-pulse. The recovered ? remained higher than that before the double-pulse treatment for at least 28 days. It is deduced that the blocking of ion-transport channels in the quasi-solid-state electrolyte causes degradation of the DSSCs. This study will shed light on the efficiency enhancement and long-term stability of quasi-solid-state DSSCs.

| S-EPMC3650726 | biostudies-literature

Efficient tuning of zinc phthalocyanine-based dyes for dye-sensitized solar cells: a detailed DFT study.

Project description:The growing energy demand speed up the designing of competent photovoltaic materials. Herein, five zinc phthalocyanine-based donor materials T1-T5 are designed by substituting various groups (isopropoxy, cyano, fluoro, methoxycarbonyl, and dicyanomethyl) around zinc phthalocyanine. B3LYP/6-31G (d,p) level density functional theory (DFT) was used to investigate the optoelectronic properties of five zinc phthalocyanine-based dyes T1-T5 for dye-sensitized solar cells. The designed molecule T1 shows maximum absorption wavelength (λ max) in the absorption spectrum at 708.89 and 751.88 nm both in gaseous state and in THF (tetrahydrofuran) solvent. The E g value of T1 (1.86 eV) is less than reference R, indicating a greater charge transfer rate for T1 among the molecules. The values of open-circuit voltages achieved with acceptor polymer PC71BM are higher than R except for T1 and are 0.69 V, 1.95 V, 1.20 V, 1.44 V, and 1.84 V for T1, T2, T3, T4, and T5, respectively. The lower the reorganization energy, the higher the charge transfer for T1 due to its lower hole mobility (0.06297 eV) than R. Thus, the designed T1-T5 molecules are expected to exhibit superior performance in dye-sensitized solar cells.

| S-EPMC9037920 | biostudies-literature

11% efficiency solid-state dye-sensitized solar cells with copper(II/I) hole transport materials.

Project description:Solid-state dye-sensitized solar cells currently suffer from issues such as inadequate nanopore filling, low conductivity and crystallization of hole-transport materials infiltrated in the mesoscopic TiO2 scaffolds, leading to low performances. Here we report a record 11% stable solid-state dye-sensitized solar cell under standard air mass 1.5 global using a hole-transport material composed of a blend of [Cu (4,4',6,6'-tetramethyl-2,2'-bipyridine)2](bis(trifluoromethylsulfonyl)imide)2 and [Cu (4,4',6,6'-tetramethyl-2,2'-bipyridine)2](bis(trifluoromethylsulfonyl)imide). The amorphous Cu(II/I) conductors that conduct holes by rapid hopping infiltrated in a 6.5??m-thick mesoscopic TiO2 scaffold are crucial for achieving such high efficiency. Using time-resolved laser photolysis, we determine the time constants for electron injection from the photoexcited sensitizers Y123 into the TiO2 and regeneration of the Y123 by Cu(I) to be 25?ps and 3.2??s, respectively. Our work will foster the development of low-cost solid-state photovoltaic based on transition metal complexes as hole conductors.

| S-EPMC5472710 | biostudies-literature

Performance of the dye-sensitized quasi-solid state solar cell with combined anthocyanin-ruthenium photosensitizer.

Project description:This work contributes to combining 12.2 mM purified anthocyanin of cyanidin-3-glucoside extracted from Indonesian black rice as the natural pigment with a ruthenium photosensitizer (1 : 1) in dye-sensitized solar cells (DSSCs) in liquid and quasi solid-state electrolytes. The findings essentially highlight the spectroscopic and electron transfer mechanism for the future trend of D-π-A natural pigment modification. The complete pigment comparison, dye absorbance, dye adsorption onto the semiconductor, dye electronic properties, electron excitation, and regeneration were investigated using spectroscopic methods. Cells employ TiO2 mesoporous nanoparticles (19.18 nm grain size, 50.99 m2 g-1 surface area, 87.8% anatase 12.2% rutile, 10.58 μm thickness, 3.18 eV band gap) sensitized by anthocyanin-N719 photosensitizer (12.2 mM) with the I-/I3 - electrolyte (0.1 M lithium iodide/0.05 M iodine/0.6 M 1-buty-3-methylimidazolium iodide/0.5 M 4-tert-butylpyridine/polyethylene oxide M w = 1 × 106) - Pt film. As a result, the quasi-solid state with combined anthocyanin-ruthenium dye-sensitized solar cell (3.51%) is achieved and reported for the first time. The work also achieved the highest efficiency of the anthocyanin dye-sensitized quasi-solid state solar cells of 2.65%. The insight on how the combined anthocyanin-N719 and the quasi-solid state electrolytes exhibit better performances will be further discussed.

| S-EPMC9057031 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data