Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Incorporation of Carbon Quantum Dots for Improvement of Supercapacitor Performance of Nickel Sulfide.

ABSTRACT: A facile hydrothermal method is adopted for the synthesis of hierarchical flowerlike nickel sulfide nanostructure materials and their composite with carbon quantum dot (NiS/C-dot) composite. The composite material exhibited good performance for electrochemical energy-storage devices as supercapacitor with a specific capacity of 880 F g^-1 at a current density of 2 A g^-1. The material remained stable up to the tested 2000 charge-discharge cycles. Carbon quantum dots of size 1.3 nm were synthesized from natural sources and the favorable electronic and surface property of C-dots were utilized for improvement of the supercapacitor performance of NiS. The results from Tafel analysis, double-layer capacitance, and the impedance measurement reveal that the incorporation of C-dots inside the NiS matrix has improved the charge-transfer process, which is mainly responsible for the enhancement of the supercapacitive property of the composite materials.

SUBMITTER: Sahoo S

PROVIDER: S-EPMC6643915 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Graphitic Carbon Quantum Dots Modified Nickel Cobalt Sulfide as Cathode Materials for Alkaline Aqueous Batteries.

Project description:Carbon quantum dots (CQDs) as a new class of emerging materials have gradually drawn researchers' concern in recent years. In this work, the graphitic CQDs are prepared through a scalable approach, achieving a high yield with more than 50%. The obtained CQDs are further used as structure-directing and conductive agents to synthesize novel N,S-CQDs/NiCo2S4 composite cathode materials, manifesting the enhanced electrochemical properties resulted from the synergistic effect of highly conductive N,S-codoped CQDs offering fast electronic transport and unique micro-/nanostructured NiCo2S4 microspheres with Faradaic redox characteristic contributing large capacity. Moreover, the nitrogen-doped reduced graphene oxide (N-rGO)/Fe2O3 composite anode materials exhibit ultrahigh specific capacity as well as significantly improved rate property and cycle performance originating from the high-capacity prism-like Fe2O3 hexahedrons tightly wrapped by highly conductive N-rGO. A novel alkaline aqueous battery assembled by these materials displays a specific energy (50.2 Wh kg-1), ultrahigh specific power (9.7 kW kg-1) and excellent cycling performance with 91.5% of capacity retention at 3 A g-1 for 5000 cycles. The present research offers a valuable guidance for the exploitation of advanced energy storage devices by the rational design and selection of battery/capacitive composite materials.

| S-EPMC7770733 | biostudies-literature

Assembling carbon quantum dots to a layered carbon for high-density supercapacitor electrodes.

Project description:It is found that carbon quantum dots (CQDs) self-assemble to a layer structure at ice crystals-water interface with freeze- drying. Such layers interconnect with each other, forming a free-standing CQD assembly, which has an interlayer distance of about 0.366?nm, due to the existence of curved carbon rings other than hexagons in the assembly. CQDs are fabricated by rupturing C60 by KOH activation with a production yield of ~15?wt.%. The CQDs obtained have an average height of 1.14?nm and an average lateral size of 7.48?nm, and are highly soluble in water. By packaging annealed CQD assembly to high density (1.23?g cm(-3)) electrodes in supercapacitors, a high volumetric capacitance of 157.4 F cm(-3) and a high areal capacitance of 0.66 F cm(-2) (normalized to the loading area of electrodes) are demonstrated in 6?M KOH aqueous electrolyte with a good rate capability.

| S-EPMC4709517 | biostudies-literature

A genome-wide approach in Arabidopsis thaliana to assess the toxicity of cadmium sulfide quantum dots

Project description:Cadmium sulfide quantum dots (CdS QDs) are widely used in novel equipment. The relevance of the research lies in the need to develop risk assessments for nanomaterials, using as basis a model plant species. Here a screen of Arabidopsis thaliana mutant lines was performed in an attempt to identify plants tolerant to CdS QDs. Two tolerant Ds insertion mutant lines (atnp01 and atnp02) were identified. A whole-genome microarray experiment showed how genes were regulated by CdS QDs. Most of the genes involved in the response to CdS QDs were related to detoxification and general metabolism. The two mutant lines treated with CdS QDs showed different patterns of gene expression. The genome-wide expression profile of seedlings of the two selected resistant mutants were acquired and compared to that of wild type seedlings using the Arabidopsis ATH1 Genome Array. The wild type seedlings were exposed to either 0 mg/L, 40 mg/L (1/2 MIC) or 80 mg/L (MIC wt) CdS QDs, and each of the resistant/tolerant mutant line plants to either 0 mg/L or 80 mg/L CdS QDs for 21 days.

2014-06-15 | E-GEOD-53989 | biostudies-arrayexpress

Advanced Carbon-Nickel Sulfide Hybrid Nanostructures: Extending the Limits of Battery-Type Electrodes for Redox-Based Supercapacitor Applications.

Project description:Transition-metal sulfides combined with conductive carbon nanostructures are considered promising electrode materials for redox-based supercapacitors due to their high specific capacity. However, the low rate capability of these electrodes, still considered "battery-type" electrodes, presents an obstacle for general use. In this work, we demonstrate a successful and fast fabrication process of metal sulfide-carbon nanostructures ideal for charge-storage electrodes with ultra-high capacity and outstanding rate capability. The novel hybrid binder-free electrode material consists of a vertically aligned carbon nanotube (VCN), terminated by a nanosized single-crystal metallic Ni grain; Ni is covered by a nickel nitride (Ni3N) interlayer and topped by trinickel disulfide (Ni3S2, heazlewoodite). Thus, the electrode is formed by a Ni3S2/Ni3N/Ni@NVCN architecture with a unique broccoli-like morphology. Electrochemical measurements show that these hybrid binder-free electrodes exhibit one of the best electrochemical performances compared to the other reported Ni3S2-based electrodes, evidencing an ultra-high specific capacity (856.3 C g-1 at 3 A g-1), outstanding rate capability (77.2% retention at 13 A g-1), and excellent cycling stability (83% retention after 4000 cycles at 13 A g-1). The remarkable electrochemical performance of the binder-free Ni3S2/Ni3N/Ni@NVCN electrodes is a significant step forward, improving rate capability and capacity for redox-based supercapacitor applications.

| S-EPMC8289178 | biostudies-literature

Fluorescence Quenching by Forster Resonance Energy Transfer in Carbon-Cadmium Sulfide Core-Shell Quantum Dots.

Project description:Carbon quantum dots (QDs) are an active subject of research in many areas of science and engineering for various applications. The present work reports the first occurrence of a carbon-cadmium sulfide core-shell QD prepared by an extremely simplified wet chemical approach where the CdS shell plays the role of a fluorescence quencher to the carbon core. The quenching effect was confirmed by fluorescence spectroscopy (steady-state and lifetime). These QDs stand as a potential candidate for sensing and imaging applications.

| S-EPMC8655935 | biostudies-literature

A genome-wide approach in Arabidopsis thaliana to assess the toxicity of cadmium sulfide quantum dots

2014-06-15 | GSE53989 | GEO

Enhanced Supercapacitor Performance and Electromagnetic Interference Shielding Effectiveness of CuS Quantum Dots Grown on Reduced Graphene Oxide Sheets.

Project description:This study is focused on the preparation of the CuS/RGO nanocomposite via the hydrothermal method using GO and Cu-DTO complex as precursors. X-ray diffraction, Fourier-transform infrared spectroscopy, and Raman and X-ray photoelectron spectroscopy study revealed the formation of the CuS/RGO nanocomposite with improved crystallinity, defective nanostructure, and the presence of the residual functional group in the RGO sheet. The morphological study displayed the transformation of CuS from nanowire to quantum dots with the incorporation of RGO. The galvanostatic charge/discharge curve showed that the CuS/RGO nanocomposite (12 wt % Cu-DTO complex) has tremendous and outperforming specific capacitance of 3058 F g-1 at 1 A g-1 current density with moderate cycling stability (∼60.3% after 1000 cycles at 10 A g-1). The as-prepared nanocomposite revealed excellent improvement in specific capacitance, cycling stability, Warburg impedance, and interfacial charge transfer resistance compared to neat CuS. The fabricated nanocomposites were also investigated for their bulk DC electrical conductivity and EMI shielding ability. It was observed that the CuS/RGO nanocomposite (9 wt % Cu-DTO) exhibited a total electromagnetic shielding efficiency of 64 dB at 2.3 GHz following absorption as a dominant shielding mechanism. Such a performance is ascribed to the presence of interconnected networks and synergistic effects.

| S-EPMC7905797 | biostudies-literature

Full-color fluorescent carbon quantum dots.

Project description:Quantum dots have innate advantages as the key component of optoelectronic devices. For white light-emitting diodes (WLEDs), the modulation of the spectrum and color of the device often involves various quantum dots of different emission wavelengths. Here, we fabricate a series of carbon quantum dots (CQDs) through a scalable acid reagent engineering strategy. The growing electron-withdrawing groups on the surface of CQDs that originated from acid reagents boost their photoluminescence wavelength red shift and raise their particle sizes, elucidating the quantum size effect. These CQDs emit bright and remarkably stable full-color fluorescence ranging from blue to red light and even white light. Full-color emissive polymer films and all types of high-color rendering index WLEDs are synthesized by mixing multiple kinds of CQDs in appropriate ratios. The universal electron-donating/withdrawing group engineering approach for synthesizing tunable emissive CQDs will facilitate the progress of carbon-based luminescent materials for manufacturing forward-looking films and devices.

| S-EPMC7852397 | biostudies-literature

Atomically dispersed Ni in cadmium-zinc sulfide quantum dots for high-performance visible-light photocatalytic hydrogen production.

Project description:Catalysts with a single atom site allow highly tuning of the activity, stability, and reactivity of heterogeneous catalysts. Therefore, atomistic understanding of the pertinent mechanism is essential to simultaneously boost the intrinsic activity, site density, electron transport, and stability. Here, we report that atomically dispersed nickel (Ni) in zincblende cadmium-zinc sulfide quantum dots (ZCS QDs) delivers an efficient and durable photocatalytic performance for water splitting under sunlight. The finely tuned Ni atoms dispersed in ZCS QDs exhibit an ultrahigh photocatalytic H2 production activity of 18.87 mmol hour-1 g-1. It could be ascribed to the favorable surface engineering to achieve highly active sites of monovalent Ni(I) and the surface heterojunctions to reinforce the carrier separation owing to the suitable energy band structures, built-in electric field, and optimized surface H2 adsorption thermodynamics. This work demonstrates a synergistic regulation of the physicochemical properties of QDs for high-efficiency photocatalytic H2 production.

| S-EPMC7428344 | biostudies-literature

Incorporation of quantum dots in silk biomaterials for fluorescence imaging.

Project description:Tracking the distribution and degradation of biomaterials after in vivo implantation or injection is important for tissue engineering and drug delivery. Intrinsic and externally labeled fluorescence has been widely used for these purposes. In the present study, 3-mercaptopropionic acid (MPA)-coated CdTe quantum dots (QDs) were incorporated into silk materials via strong interactions between QDs and silk, likely involving the hydrophobic beta-sheet structures in silk. MPA-QDs were pre-mixed with silk solution, followed by ultrasonication to induce silk gelation or by blending with polyvinyl alcohol (PVA) to generate silk microspheres. Silk structural changes and hydrogel/microsphere morphologies were examined by ATR-FTIR and SEM, respectively. The fluorescence of QDs-incorporated silk hydrogels and microspheres remained stable in PBS pH 7.4 for more than 4 days. The amount of QDs released from the materials during the incubation was dependent on loading; no QDs were released when loading was below 0.026 nmol/mg silk. After subcutaneous injection in mice, the fluorescence of QDs-incorporated silk microspheres was quenched within 24 h, similar to that of free QDs. In contrast, the QDs-incorporated silk hydrogels fluoresced for more than 4 days in vivo.

| S-EPMC4527682 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data