Browse
Submit Data
Databases
API
Help

Dataset Information

14 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Growth of Complex 2D Material-Based Structures with Naturally Formed Contacts.

ABSTRACT: The difficulty of processing two-dimensional (2D) transition metal dichalcogenide (TMD) materials into working devices with any scalability is one of the largest impediments to capitalizing on their industrial promise. Here, we describe a versatile, simple, and scalable technique to directly grow self-contacted thin-film materials over a range of TMDs (MoS2, MoSe2, WS2, and WSe2), where predeposited bulk metallic contacts serve as the nucleation site for the TMD material to grow, forming naturally contacted device structures in a single step. The conditions for growth as well as optical and physical properties are reported. Because the material grows controllably around the lithographically defined patterns, wafer scale circuits and complex device geometries can be envisioned, including lateral heterostructures of different TMD materials.

SUBMITTER: Aleithan SH

PROVIDER: S-EPMC6648845 | biostudies-literature | 2019 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Growth of Complex 2D Material-Based Structures with Naturally Formed Contacts.

Aleithan Shrouq H SH Wickramasinghe Thushan E TE Lindquist Miles M Khadka Sudiksha S Stinaff Eric E

ACS omega 20190531 5

The difficulty of processing two-dimensional (2D) transition metal dichalcogenide (TMD) materials into working devices with any scalability is one of the largest impediments to capitalizing on their industrial promise. Here, we describe a versatile, simple, and scalable technique to directly grow self-contacted thin-film materials over a range of TMDs (MoS2, MoSe2, WS2, and WSe2), where predeposited bulk metallic contacts serve as the nucleation site f ...[more]

PMID: 31460046

Similar Datasets

Optically Controllable 2D Material/Complex Oxide Heterointerface.

Project description:Heterostructures play a vital role in functional devices on the basis of the individual constituents. Non-conventional heterostructures formed by stacking 2D materials onto structurally distinct materials are of great interest in achieving novel phenomena that are both scientifically and technologically relevant. Here, a heterostructure based on a 2D (molybdenum ditelluride) MoTe2 and an amorphous strontium titanium oxide (a-STO) thin film is reported. The heterostructure functions as a high-performance photodetector, which exhibits anomalous negative photoresponse in the pristine device due to the scattering effect from the light-induced Oδ- ions. The photoresponsivity and the specific detectivity are found to be >104 AW-1 and >1013 Jones, respectively, which are significantly higher than those in standard MoTe2 devices. Moreover, through tuning the light programming time, the photodetection behavior of the MoTe2/a-STO heterostructure experiences a dynamic evolution from negative to positive. This is due to the optically controllable modulation of the interfacial states, which is further confirmed by the X-ray photoelectron spectroscopy and photoluminescence measurements. It is envisioned that the 2D material/a-STO heterostructure could be a potential platform for exploring new functional devices.

| S-EPMC7610330 | biostudies-literature

Synthesis of a 2D phosphorus material in a MOF-based 2D nano-reactor.

Project description:Synthesis of two dimensional (2D) materials mainly relies on interface-templates, exfoliation of layered crystals and surfactant-assistance. Here we have realized another strategy of polymerization in a 2D nano-reactor. As an application of this strategy, a 2D nano-reactor was constructed within a new pillar-layer metal organic framework (MOF) and in this nano-reactor a moderately stable 2D phosphorus material was synthesized from white phosphorus (P4). Our research may provide a new approach for the synthesis of various 2D materials.

| S-EPMC6050534 | biostudies-literature

A 2D material-based transparent hydrogel with engineerable interference colours.

Project description:Transparent hydrogels are key materials for many applications, such as contact lens, imperceptible soft robotics and invisible wearable devices. Introducing large and engineerable optical anisotropy offers great prospect for endowing them with extra birefringence-based functions and exploiting their applications in see-through flexible polarization optics. However, existing transparent hydrogels suffer from limitation of low and/or non-fine engineerable birefringence. Here, we invent a transparent magneto-birefringence hydrogel with large and finely engineerable optical anisotropy. The large optical anisotropy factor of the embedded magnetic two-dimensional material gives rise to the large magneto-birefringence of the hydrogel in the transparent condition of ultra-low concentration, which is several orders of magnitude larger than usual transparent magnetic hydrogels. High transparency, large and tunable optical anisotropy cooperatively permit the magnetic patterning of interference colours in the hydrogel. The hydrogel also shows mechanochromic and thermochromic property. Our finding provides an entry point for applying hydrogel in optical anisotropy and colour centred fields, with several proof-of-concept applications been demonstrated.

| S-EPMC8904793 | biostudies-literature

Sequestering carbon dioxide into complex structures of naturally occurring gas hydrates.

Project description:Large amounts of CH4 in the form of solid hydrates are stored on continental margins and in permafrost regions. If these CH4 hydrates could be converted into CO2 hydrates, they would serve double duty as CH4 sources and CO2 storage sites. We explore here the swapping phenomenon occurring in structure I (sI) and structure II (sII) CH4 hydrate deposits through spectroscopic analyses and its potential application to CO2 sequestration at the preliminary phase. The present 85% CH4 recovery rate in sI CH4 hydrate achieved by the direct use of binary N2+CO2 guests is surprising when compared with the rate of 64% for a pure CO2 guest attained in the previous approach. The direct use of a mixture of N2+CO2 eliminates the requirement of a CO2 separation/purification process. In addition, the simultaneously occurring dual mechanism of CO2 sequestration and CH4 recovery is expected to provide the physicochemical background required for developing a promising large-scale approach with economic feasibility. In the case of sII CH4 hydrates, we observe a spontaneous structure transition of sII to sI during the replacement and a cage-specific distribution of guest molecules. A significant change of the lattice dimension caused by structure transformation induces a relative number of small cage sites to reduce, resulting in the considerable increase of CH4 recovery rate. The mutually interactive pattern of targeted guest-cage conjugates possesses important implications for the diverse hydrate-based inclusion phenomena as illustrated in the swapping process between CO2 stream and complex CH4 hydrate structure.

| S-EPMC1568911 | biostudies-literature

Material-Device-Circuit Co-optimization of 2D Material based FETs for Ultra-Scaled Technology Nodes.

Project description:Two-dimensional (2D) material based FETs are being considered for future technology nodes and high performance logic applications. However, a comprehensive assessment of 2D material based FETs has been lacking for high performance logic applications considering appropriate system level figure-of-merits (FOMs) e.g. delay, and energy-delay product. In this paper, we present guidelines for 2D material based FETs to meet sub-10 nm high performance logic requirements focusing on material requirement, device design, energy-delay optimization for the first time. We show the need for 2D materials with smaller effective mass in the transport direction and anisotropicity to meet the performance requirement for future technology nodes. We present novel device designs with one such 2D material (monolayer black-phosphorus) to keep Moore's alive for the HP logic in sub-5 nm gate length regime. With these device proposals we show that below 5 nm gate lengths 2D electrostatistics arising from gate stack design becomes more of a challenge than direct source-to-drain tunneling for 2D material-based FETs. Therefore, it is challenging to meet both delay and energy-delay requirement in sub-5 nm gate length regime without scaling both supply voltage (V DD ) and effective-oxide-thickness (EOT) below 0.5 V and 0.5 nm respectively.

| S-EPMC5504057 | biostudies-other

Diffraction-limited imaging with monolayer 2D material-based ultrathin flat lenses.

Project description:Ultrathin flat optics allow control of light at the subwavelength scale that is unmatched by traditional refractive optics. To approach the atomically thin limit, the use of 2D materials is an attractive possibility due to their high refractive indices. However, achievement of diffraction-limited focusing and imaging is challenged by their thickness-limited spatial resolution and focusing efficiency. Here we report a universal method to transform 2D monolayers into ultrathin flat lenses. Femtosecond laser direct writing was applied to generate local scattering media inside a monolayer, which overcomes the longstanding challenge of obtaining sufficient phase or amplitude modulation in atomically thin 2D materials. We achieved highly efficient 3D focusing with subwavelength resolution and diffraction-limited imaging. The high focusing performance even allows diffraction-limited imaging at different focal positions with varying magnifications. Our work paves the way for downscaling of optical devices using 2D materials and reports an unprecedented approach for fabricating ultrathin imaging devices.

| S-EPMC7421448 | biostudies-literature

Distance-based reconstruction of protein quaternary structures from inter-chain contacts.

Project description:Predicting the quaternary structure of protein complex is an important problem. Inter-chain residue-residue contact prediction can provide useful information to guide the ab initio reconstruction of quaternary structures. However, few methods have been developed to build quaternary structures from predicted inter-chain contacts. Here, we develop the first method based on gradient descent optimization (GD) to build quaternary structures of protein dimers utilizing inter-chain contacts as distance restraints. We evaluate GD on several datasets of homodimers and heterodimers using true/predicted contacts and monomer structures as input. GD consistently performs better than both simulated annealing and Markov Chain Monte Carlo simulation. Starting from an arbitrarily quaternary structure randomly initialized from the tertiary structures of protein chains and using true inter-chain contacts as input, GD can reconstruct high-quality structural models for homodimers and heterodimers with average TM-score ranging from 0.92 to 0.99 and average interface root mean square distance from 0.72 Å to 1.64 Å. On a dataset of 115 homodimers, using predicted inter-chain contacts as restraints, the average TM-score of the structural models built by GD is 0.76. For 46% of the homodimers, high-quality structural models with TM-score ≥ 0.9 are reconstructed from predicted contacts. There is a strong correlation between the quality of the reconstructed models and the precision and recall of predicted contacts. Only a moderate precision or recall of inter-chain contact prediction is needed to build good structural models for most homodimers. Moreover, GD improves the quality of quaternary structures predicted by AlphaFold2 on a Critical Assessment of Techniques for Protein Structure Prediction-Critical Assessments of Predictions of Interactions dataset.

| S-EPMC8816881 | biostudies-literature

2D material programming for 3D shaping.

Project description:Two-dimensional (2D) growth-induced 3D shaping enables shape-morphing materials for diverse applications. However, quantitative design of 2D growth for arbitrary 3D shapes remains challenging. Here we show a 2D material programming approach for 3D shaping, which prints hydrogel sheets encoded with spatially controlled in-plane growth (contraction) and transforms them to programmed 3D structures. We design 2D growth for target 3D shapes via conformal flattening. We introduce the concept of cone singularities to increase the accessible space of 3D shapes. For active shape selection, we encode shape-guiding modules in growth that direct shape morphing toward target shapes among isometric configurations. Our flexible 2D printing process enables the formation of multimaterial 3D structures. We demonstrate the ability to create 3D structures with a variety of morphologies, including automobiles, batoid fish, and real human face.

| S-EPMC7841157 | biostudies-literature

Surface Structures Formed by a Copper(II) Complex of Alkyl-Derivatized Indigo.

Project description:Assembled structures of dyes have great influence on their coloring function. For example, metal ions added in the dyeing process are known to prevent fading of color. Thus, we have investigated the influence of an addition of copper(II) ion on the surface structure of alkyl-derivatized indigo. Scanning tunneling microscope (STM) analysis revealed that the copper(II) complexes of indigo formed orderly lamellar structures on a HOPG substrate. These lamellar structures of the complexes are found to be more stable than those of alkyl-derivatized indigos alone. Furthermore, 2D chirality was observed.

| S-EPMC5456585 | biostudies-other

Modeling Framework for Fracture in Multiscale Cement-Based Material Structures.

Project description:Multiscale modeling for cement-based materials, such as concrete, is a relatively young subject, but there are already a number of different approaches to study different aspects of these classical materials. In this paper, the parameter-passing multiscale modeling scheme is established and applied to address the multiscale modeling problem for the integrated system of cement paste, mortar, and concrete. The block-by-block technique is employed to solve the length scale overlap challenge between the mortar level (0.1-10 mm) and the concrete level (1-40 mm). The microstructures of cement paste are simulated by the HYMOSTRUC3D model, and the material structures of mortar and concrete are simulated by the Anm material model. Afterwards the 3D lattice fracture model is used to evaluate their mechanical performance by simulating a uniaxial tensile test. The simulated output properties at a lower scale are passed to the next higher scale to serve as input local properties. A three-level multiscale lattice fracture analysis is demonstrated, including cement paste at the micrometer scale, mortar at the millimeter scale, and concrete at centimeter scale.

| S-EPMC5552180 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data