Dataset Information

Destabilization and energy characteristics of coal pillar in roadway driving along gob based on rockburst risk assessment.

ABSTRACT: Roadway driving along adjacent goafs is an effective method to develop the recovery rate of coal resources. However, rock burst triggered by dynamic destabilization of coal pillars poses a serious threat to safe and efficient mining, thereby significantly restricting the sustainable development of coal mines. In this study, from the perspectives of energy accumulation and dissipation, a mathematical model of coal pillars is established and the energy equilibrium relationship of the mechanical system is analysed. The rock burst mechanism of coal pillars in gob-side entry is obtained based on a fold catastrophe mathematical model. Results indicate that the rock burst triggered by the instability is a destabilization phenomenon. If the stiffness factor of the mechanical system is less than 1 and the external force is enough to lead coal pillars to the peak stress point, then rock burst disaster occurs. The engineering analysis and numerical simulation are conducted to study the rock burst in the gob-side entry that occurred in Xin'an coal mine. Stress release caused by mining can reduce the risk of rock burst to a certain extent. The amount of elastic energy released is 6.4512 × 107 J, which is close to the observation data and verifies the correctness and rationality of the research method. The research result provides a theoretical basis and technical guidance for rock burst prevention and control in roadway driving along adjacent goafs.

SUBMITTER: Xue Y

PROVIDER: S-EPMC6689587 | biostudies-literature | 2019 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Destabilization and energy characteristics of coal pillar in roadway driving along gob based on rockburst risk assessment.

Xue Yi Y Cao Zhengzheng Z Shen Wenlong W

Royal Society open science 20190710 7

Roadway driving along adjacent goafs is an effective method to develop the recovery rate of coal resources. However, rock burst triggered by dynamic destabilization of coal pillars poses a serious threat to safe and efficient mining, thereby significantly restricting the sustainable development of coal mines. In this study, from the perspectives of energy accumulation and dissipation, a mathematical model of coal pillars is established and the energy equilibrium relationship of the mechanical sy ...[more]

PMID: 31417716

Similar Datasets

Project description:To investigate the influence of bedding structure and different loading rates on the dynamic fracture characteristics and energy dissipation of Datong coal, a split Hopkinson bar was used to obtain the fracture characteristics of coal samples with different bedding angles. The process of crack initiation and propagation in Datong coal was recorded by the high-speed camera. The formula for the model I fracture toughness of the transversely isotropic material is obtained on the basis of the finite element method (FEM) together with the J-integral. By comparing the incident energy, absorbed energy, fracture energy and residual kinetic energy of Datong coal samples under various impact speeds, the energy dissipation characteristics during the dynamic fracture process of coal considering the bedding structure is acquired. The experimental results indicate that the fracture pattern of notched semi-circular bending (NSCB) Datong coal is tensile failure. After splitting into two parts, the coal sample rotates approximately uniformly around the contact point between the sample and the incident rod. The dynamic fracture toughness is 3.52~8.64 times of the quasi-static fracture toughness for Datong coal. Dynamic fracture toughness increases with increasing impact velocity, and the effect of bedding angle on fracture toughness then decreases. In addition, the residual kinetic energy of coal samples with the same bedding angle increases with the increase of impact speed. The energy utilization rate decreases continuously, and the overall dispersion of statistical data decreases gradually. In rock fragmentation engineering, the optimum loading condition is low-speed loading regardless of energy utilization efficiency or fracture toughness. These conclusions may have significant implications for the optimization of hydraulic fracturing process in coal mass and the further understanding of crack propagation mechanisms in coalbed methane extraction (CME). The anisotropic effect of coal should be fully considered in both these cases.

Project description:In order to solve the problem of coal dust pollution at the transfer point, a three-dimensional numerical model of wind flow-coal dust at the loading point of underground rubber run was established by computational fluid dynamics (CFD) discrete particle model and finite element method and k-ε turbulence model, and the coal dust diffusion pollution phenomenon caused by the coal flow transfer under the intersection of wind flow in the cross tunnel was studied. Based on the simulation results of wind flow velocity contour, pressure contour and isochronous flow vector distribution, the influence mechanism of wind flow and coal dust characteristics on the distribution of wind flow and coal dust diffusion in the roadway is analysed, and a dust control and reduction system and treatment scheme with new pneumatic screw spray technology as the core is proposed to suppress coal dust pollution at the reloading point. The results of the study show that the wind flow distribution is mainly influenced by the intersection of tape traction and cross-roadway wind flow, showing a complex multi-layer distribution along the roadway and in the normal direction; the diffusion of coal dust of different particle sizes is influenced by the roadway wind flow, and coal dust with particle sizes in the range of 10μm~20μm is more easily diffused, and the dust with particle sizes in the range of 20μm~45μm is mainly collected and suspended near the vortex wind flow at the cross-roadway. The coal dust in the range of 20 μm~45 μm is more likely to gather in the vortex; the treatment system effectively controls the coal dust inside the dust cover, and the spiral-shaped transported droplet particle group formed by the pneumatic spiral spray combines with it efficiently, which verifies the dust control and reduction effect of the pneumatic spiral spray system at the transfer point, and the dust removal efficiency reaches 89.35%~93.06%, which provides relevant theoretical support for the treatment of dust pollution at the coal transfer point in underground coal mines It provides the theoretical support and means to control dust pollution at underground coal transfer points.

Dataset Information

Destabilization and energy characteristics of coal pillar in roadway driving along gob based on rockburst risk assessment.

Publications

Destabilization and energy characteristics of coal pillar in roadway driving along gob based on rockburst risk assessment.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets