Dataset Information

A Simple Proposition for Improving Industrial Hygiene Air Sampling Methods.

ABSTRACT: When conducting an exposure assessment, the primary goal of the industrial hygienist is to fully characterize the worker's exposure during a work shift to compare it with an occupational exposure limit. This applies regardless of the duration of the work activity as an activity that is relatively short in duration can still present exposure in excess of the occupational exposure limit even when normalized over an 8-hr shift. This goal, however, is often impeded by the specification of a minimum sample volume in the published sampling method, which may prevent the sample from being collected or submitted for analysis. Removing the specification of minimum sample volume (or adjusting it from a requirement to a recommendation), in contrast, allows for a broader assessment of jobs that consist of short-duration and high-exposure activities and also eliminates the unnecessary practice of running sampling pumps in clean air to collect a specified, minimum volume.

SUBMITTER: Paik SY

PROVIDER: S-EPMC6717830 | biostudies-literature | 2019 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

A Simple Proposition for Improving Industrial Hygiene Air Sampling Methods.

Paik Samuel Y SY Zalk David M DM

Safety and health at work 20190711 3

When conducting an exposure assessment, the primary goal of the industrial hygienist is to fully characterize the worker's exposure during a work shift to compare it with an occupational exposure limit. This applies regardless of the duration of the work activity as an activity that is relatively short in duration can still present exposure in excess of the occupational exposure limit even when normalized over an 8-hr shift. This goal, however, is often impeded by the specification of a minimum ...[more]

PMID: 31497338

Similar Datasets

Project description:BackgroundA variety of different sampling devices are currently available to acquire air samples for the study of the microbiome of the air. All have a degree of technical complexity that limits deployment. Here, we evaluate the use of a novel device, which has no technical complexity and is easily deployable.ResultsAn air-cleaning device powered by electrokinetic propulsion has been adapted to provide a universal method for collecting samples of the aerobiome. Plasma-induced charge in aerosol particles causes propulsion to and capture on a counter-electrode. The flow of ions creates net bulk airflow, with no moving parts. A device and electrode assembly have been re-designed from air-cleaning technology to provide an average air flow of 120 lpm. This compares favorably with current air sampling devices based on physical air pumping. Capture efficiency was determined by comparison with a 0.4 μm polycarbonate reference filter, using fluorescent latex particles in a controlled environment chamber. Performance was compared with the same reference filter method in field studies in three different environments. For 23 common fungal species by quantitative polymerase chain reaction (qPCR), there was 100 % sensitivity and apparent specificity of 87 %, with the reference filter taken as "gold standard." Further, bacterial analysis of 16S RNA by amplicon sequencing showed equivalent community structure captured by the electrokinetic device and the reference filter. Unlike other current air sampling methods, capture of particles is determined by charge and so is not controlled by particle mass. We analyzed particle sizes captured from air, without regard to specific analyte by atomic force microscopy: particles at least as low as 100 nM could be captured from ambient air.ConclusionsThis work introduces a very simple plug-and-play device that can sample air at a high-volume flow rate with no moving parts and collect particles down to the sub-micron range. The performance of the device is substantially equivalent to capture by pumping through a filter for microbiome analysis by quantitative PCR and amplicon sequencing.

Project description:Workers' compensation (WC) insurers collect large amounts of industrial hygiene (IH) data in the United States. The data collected is not easily accessible for research or surveillance purposes. Individual WC insurers are using computerized systems to standardize and store the IH data, leaving a gap in standardization among the different WC insurers. This study sought to standardize IH data collection among WC insurers and to determine the feasibility of pooling collected IH data. IH air and noise survey forms were collected from WC insurers. Data fields on the forms were evaluated for importance and a study list of core fields was developed. The core study list was presented to an IH review panel for review before finalization. The final core study list was compared to recommendations published by the American Conference of Governmental Industrial Hygienists (ACGIH) and the American Industrial Hygiene Association (AIHA). Fifty-nine forms from 10 organizations were collected. Industrial hygienists from research organizations, state-based WC insurers, and private WC insurers participated in the data field evaluation and on the review panel. For both air and noise survey forms, more than half the data fields (55% and 54%, respectively) were ranked as "essential." Three of the four fields in the worker and control observations category ranked "essential" were found less than half of the time on both types of survey forms. The study list of core data elements consisted of more than half of the data fields from both the air and noise survey forms. Three additional fields were added based on the comparison to the ACGIH-AIHA recommendations. Data fields essential to standardizing IH data collection were identified and verified. The "essential" data fields will be made available and have the potential to be incorporated into WC insurers electronic IH data management systems. Future research should focus on other IH survey forms, such as those used in ergonomic assessments and specific chemical exposures, and methods to transfer data fields to electronic platforms.

Dataset Information

A Simple Proposition for Improving Industrial Hygiene Air Sampling Methods.

Publications

A Simple Proposition for Improving Industrial Hygiene Air Sampling Methods.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets