Dataset Information

DARLING: a device for assessing resistance to lodging in grain crops.

ABSTRACT: Background:Stalk lodging (breakage of plant stems prior to harvest) is a major problem for both farmers and plant breeders. A limiting factor in addressing this problem is the lack of a reliable method for phenotyping stalk strength. Previous methods of phenotyping stalk strength induce failure patterns different from those observed in natural lodging events. This paper describes a new device for field-based phenotyping of stalk strength called "DARLING" (device for assessing resistance to lodging in grains). The DARLING apparatus consists of a vertical arm which is connected to a horizontal footplate by a hinge. The operator places the device next to a stalk, aligns the stalk with a force sensor, steps on the footplate, and then pushes the vertical arm forward until the stalk breaks. Force and rotation are continuously recorded during the test and these quantities are used to calculate two quantities: stalk flexural stiffness and stalk bending strength. Results:Field testing of DARLING was performed at multiple sites. Validation was based upon several factors. First, the device induces the characteristic "crease" or Brazier buckling failure patterns observed in naturally lodged stalks. Second, in agreement with prior research, flexural rigidity values attained using the DARLING apparatus are strongly correlated with bending strength measurements. Third, flexural stiffness and bending strength values obtained with DARLING are in agreement with laboratory-based stiffness and strength values for corn stalks. Finally, a paired specimen experimental design was used to determine that the flexural data obtained with DARLING is in agreement with laboratory-based flexural testing results of the same specimens. DARLING was also deployed in the field to assess phenotyping throughput (# of stalks phenotyped per hour). Over approximately 5000 tests, the average testing rate was found to be 210 stalks/h. Conclusions:The DARLING apparatus provides a quantitative assessment of stalk strength in a field setting. It induces the same failure patterns observed in natural lodging events. DARLING can also be used to perform non-destructive flexural tests. This technology has many applications, including breeding, genetic studies on stalk strength, longitudinal studies of stalk flexural stiffness, and risk assessment of lodging propensity.

SUBMITTER: Cook DD

PROVIDER: S-EPMC6720399 | biostudies-literature | 2019

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

DARLING: a device for assessing resistance to lodging in grain crops.

Cook Douglas D DD de la Chapelle Witold W Lin Ting-Che TC Lee Shien Yang SY Sun Wenhuan W Robertson Daniel J DJ

Plant methods 20190903

<h4>Background</h4>Stalk lodging (breakage of plant stems prior to harvest) is a major problem for both farmers and plant breeders. A limiting factor in addressing this problem is the lack of a reliable method for phenotyping stalk strength. Previous methods of phenotyping stalk strength induce failure patterns different from those observed in natural lodging events. This paper describes a new device for field-based phenotyping of stalk strength called "DARLING" (device for assessing resistance ...[more]

PMID: 31497063

Similar Datasets

Project description:BackgroundHow to control the physical damage during maize kernel harvesting is a major problem for both mechanical designers and plant breeders. A limitation of addressing this problem is lacking a reliable method for assessing the relation between kernel damage susceptibility and threshing quality. The design, construction, and testing of a portable tool called "HANDY", which can assess the resistance to mechanical crushing in maize kernel. HANDY can impact the kernel with a special accelerator at a given rotating speed and then cause measurable damage to the kernel. These factors are varied to determine the ideal parameters for operating the HANDY.ResultsBreakage index (BI, target index of HANDY), decreased as the moisture content of kernel increased or the rotating speed decreased within the tested range. Furthermore, the HANDY exhibited a greater sensitivity in testing kernels at higher moisture level influence on the susceptibility of damage kernel than that in Breakage Susceptibility tests, particularly when the centrifugation speed is about 1800 r/min and the centrifugal disc type is curved. Considering that the mechanical properties of kernels vary greatly as the moisture content changes, a subsection linear (average goodness of fit is 0.9) to predict the threshing quality is built by piecewise function analysis, which is divided by kernel moisture. Specifically, threshing quality is regarded as a function of the measured result of the HANDY. Five maize cultivars are identified with higher damage resistance among 21 tested candidate varieties.ConclusionsThe HANDY provides a quantitative assessment of the mechanical crushing resistance of maize kernel. The BI is demonstrated to be a more robust index than breakage susceptibility (BS) when evaluating threshing quality in harvesting in terms of both reliability and accuracy. This study also offers a new perspective for evaluating the mechanical crushing resistance of grains and provides technical support for breeding and screening maize varieties that are suitable for mechanical harvesting.

Project description:The origins of agriculture, 10 000 years ago, led to profound changes in the biology of plants exploited as grain crops, through the process of domestication. This special case of evolution under cultivation led to domesticated cereals and pulses requiring humans for their dispersal, but the accompanying mechanisms causing higher productivity in these plants remain unknown. The classical view of crop domestication is narrow, focusing on reproductive and seed traits including the dispersal, dormancy and size of seeds, without considering whole-plant characteristics. However, the effects of initial domestication events can be inferred from consistent differences between traditional landraces and their wild progenitors.We studied how domestication increased the yields of Fertile Crescent cereals and pulses using a greenhouse experiment to compare landraces with wild progenitors. We grew eight crops: barley, einkorn and emmer wheat, oat, rye, chickpea, lentil and pea. In each case, comparison of multiple landraces with their wild progenitors enabled us to quantify the effects of domestication rather than subsequent crop diversification. To reveal the mechanisms underpinning domestication-linked yield increases, we measured traits beyond those classically associated with domestication, including the rate and duration of growth, reproductive allocation, plant size and also seed mass and number.Cereal and pulse crops had on average 50% higher yields than their wild progenitors, resulting from a 40% greater final plant size, 90% greater individual seed mass and 38% less chaff or pod material, although this varied between species. Cereal crops also had a higher seed number per spike compared with their wild ancestors. However, there were no differences in growth rate, total seed number, proportion of reproductive biomass or the duration of growth.The domestication of Fertile Crescent crops resulted in larger seed size leading to a larger plant size, and also a reduction in chaff, with no decrease in seed number per individual, which proved a powerful package of traits for increasing yield. We propose that the important steps in the domestication process should be reconsidered, and the domestication syndrome broadened to include a wider range of traits.

Dataset Information

DARLING: a device for assessing resistance to lodging in grain crops.

Publications

DARLING: a device for assessing resistance to lodging in grain crops.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets