Dataset Information

Double-sided slippery liquid-infused porous materials using conformable mesh.

ABSTRACT: Often wetting is considered from the perspective of a single surface of a rigid substrate and its topographical properties such as roughness or texture. However, many substrates, such as membranes and meshes, have two useful surfaces. Such flexible substrates also offer the potential to be formed into structures with either a double-sided surface (e.g. by joining the ends of a mesh as a tape) or a single-sided surface (e.g. by ends with a half-twist). When a substrate possesses holes, it is also possible to consider how the spaces in the substrate may be connected or disconnected. This combination of flexibility, holes and connectedness can therefore be used to introduce topological concepts, which are distinct from simple topography. Here, we present a method to create a Slippery Liquid-Infused Porous Surface (SLIPS) coating on flexible conformable doubled-sided meshes and for coating complex geometries. By considering the flexibility and connectedness of a mesh with the surface properties of SLIPS, we show it is possible to create double-sided SLIPS materials with high droplet mobility and droplet control on both faces. We also exemplify the importance of flexibility using a mesh-based SLIPS pipe capable of withstanding laminar and turbulent flows for 180 and 90?minutes, respectively. Finally, we discuss how ideas of topology introduced by the SLIPS mesh might be extended to create completely new types of SLIPS systems, such as Mobius strips and auxetic metamaterials.

SUBMITTER: Geraldi NR

PROVIDER: S-EPMC6746700 | biostudies-literature | 2019 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Double-sided slippery liquid-infused porous materials using conformable mesh.

Geraldi Nicasio R NR Guan Jian H JH Dodd Linzi E LE Maiello Pietro P Xu Ben B BB Wood David D Newton Michael I MI Wells Gary G GG McHale Glen G

Scientific reports 20190916 1

Often wetting is considered from the perspective of a single surface of a rigid substrate and its topographical properties such as roughness or texture. However, many substrates, such as membranes and meshes, have two useful surfaces. Such flexible substrates also offer the potential to be formed into structures with either a double-sided surface (e.g. by joining the ends of a mesh as a tape) or a single-sided surface (e.g. by ends with a half-twist). When a substrate possesses holes, it is also ...[more]

PMID: 31527694

Similar Datasets

Project description:Many types of slippery liquid-infused porous surfaces (or 'SLIPS') can resist adhesion and colonization by microorganisms. These 'slippery' materials thus offer new approaches to prevent fouling on a range of commercial and industrial surfaces, including biomedical devices. However, while SLIPS can prevent fouling on surfaces to which they are applied, they can currently do little to prevent the proliferation of non-adherent (planktonic) organisms, stop them from colonizing other surfaces, or prevent them from engaging in other behaviors that could lead to infection and associated burdens. Here, we report an approach to the design of multi-functional SLIPS that addresses these issues and expands the potential utility of slippery surfaces in antimicrobial contexts. Our approach is based on the incorporation and controlled release of small-molecule antimicrobial agents from the porous matrices used to host infused slippery oil phases. We demonstrate that SLIPS fabricated using nanoporous polymer multilayers can prevent short- and longer-term colonization and biofilm formation by four common fungal and bacterial pathogens (Candida albicans, Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus aureus), and that the polymer and oil phases comprising these materials can be exploited to load and sustain the release of triclosan, a model hydrophobic and broad-spectrum antimicrobial agent, into surrounding media. This approach both improves the inherent anti-fouling properties of these materials and endows them with the ability to efficiently kill planktonic pathogens. Finally, we show that this approach can be used to fabricate dual-action SLIPS on complex surfaces, including the luminal surfaces of flexible catheter tubes. This strategy has the potential to be general; we anticipate that the materials, strategies, and concepts reported here will enable new approaches to the design of slippery surfaces with improved anti-fouling properties and open the door to new applications of slippery liquid-infused materials that host or promote the release of a variety of other active agents.

Project description:Young's equation is fundamental to the concept of the wettability of a solid surface. It defines the contact angle for a droplet on a solid surface through a local equilibrium at the three-phase contact line. Recently, the concept of a liquid Young's law contact angle has been developed to describe the wettability of slippery liquid-infused porous surfaces (SLIPS) by droplets of an immiscible liquid. In this work, we present a new method to fabricate biphilic SLIP surfaces and show how the wettability of the composite SLIPS can be exploited with a macroscopic wedge-shaped pattern of two distinct lubricant liquids. In particular, we report the development of composite liquid surfaces on silicon substrates based on lithographically patterning a Teflon AF1600 coating and a superhydrophobic coating (Glaco Mirror Coat Zero), where the latter selectively dewets from the former. This creates a patterned base surface with preferential wetting to matched liquids: the fluoropolymer PTFE with a perfluorinated oil Krytox and the hydrophobic silica-based GLACO with olive oil (or other mineral oils or silicone oil). This allows us to successively imbibe our patterned solid substrates with two distinct oils and produce a composite liquid lubricant surface with the oils segregated as thin films into separate domains defined by the patterning. We illustrate that macroscopic wedge-shaped patterned SLIP surfaces enable low-friction droplet self-propulsion. Finally, we formulate an analytical model that captures the dependence of the droplet motion as a function of the wettability of the two liquid lubricant domains and the opening angle of the wedge. This allows us to derive scaling relationships between various physical and geometrical parameters. This work introduces a new approach to creating patterned liquid lubricant surfaces, demonstrates long-distance droplet self-propulsion on such surfaces, and sheds light on the interactions between liquid droplets and liquid surfaces.

Project description:Liquid-filled porous materials exist widely in nature and engineering fields, with the diffusion of substances in them playing an important role in system functions. Although surface evaporation is often inevitable in practical scenarios, the evaporation effects on diffusion behavior in liquid-filled porous materials have not been well explored yet. In this work, we performed noninvasive diffusion imaging experiments to observe the diffusion process of erioglaucine disodium salt dye in a liquid-filled nitrocellulose membrane under a wide range of relative humidities (RHs). We found that evaporation can significantly accelerate the diffusion rate and alter concentration distribution compared with the case without evaporation. We explained the accelerated diffusion phenomenon by the mechanism that evaporation would induce a weak flow in liquid-filled porous materials, which leads to convective diffusion, i.e., evaporation-induced flow and diffusion (EIFD). Based on the EIFD mechanism, we proposed a convective diffusion model to quantitatively predict the diffusion process in liquid-filled porous materials under evaporation and experimentally validated the model. Introducing the dimensionless Peclet (P e) number to measure the relative contribution of the evaporation effect to pure molecular diffusion, we demonstrated that even at a high RH of 95%, where the evaporation effect is usually assumed negligible in common sense, the evaporation-induced diffusion still overwhelms the molecular diffusion. The flow velocity induced by evaporation in liquid-filled porous materials was found to be 0.4-5 μm/s, comparable to flow in many biological and biomedical systems. The present analysis may help to explain the driving mechanism of tissue perfusion and provide quantitative analysis or inspire new control methods of flow and material exchange in numerous cutting-edge technologies, such as paper-based diagnostics, hydrogel-based flexible electronics, evaporation-induced electricity generation, and seawater purification.

Dataset Information

Double-sided slippery liquid-infused porous materials using conformable mesh.

Publications

Double-sided slippery liquid-infused porous materials using conformable mesh.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets