Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Template-Assisted Formation of High-Quality ?-Phase HC(NH2)2PbI3 Perovskite Solar Cells.

ABSTRACT: Formamidinium (FA) lead halide (?-FAPbI3) perovskites are promising materials for photovoltaic applications because of their excellent light harvesting capability (absorption edge 840 nm) and long carrier diffusion length. However, it is extremely difficult to prepare a pure ?-FAPbI3 phase because of its easy transformation into a nondesirable ?-FAPbI3 phase. In the present study, a "perovskite" template (MAPbI3-FAI-PbI2-DMSO) structure is used to avoid and suppress the formation of ?-FAPbI3 phases. The perovskite structure is formed via postdeposition involving the treatment of colloidal MAI-PbI2-DMSO film with FAI before annealing. In situ X-ray diffraction in vacuum shows no detectable ?-FAPbI3 phase during the whole synthesis process when the sample is annealed from 100 to 180 °C. This method is found to reduce defects at grain boundaries and enhance the film quality as determined by means of photoluminescence mapping and Kelvin probe force microscopy. The perovskite solar cells (PSCs) fabricated by this method demonstrate a much-enhanced short-circuit current density (??J sc) of 24.99 mA cm-2 and a power conversion efficiency (PCE) of 21.24%, which is the highest efficiency reported for pure FAPbI3, with great stability under 800 h of thermal ageing and 500 h of light soaking in nitrogen.

SUBMITTER: Shi P

PROVIDER: S-EPMC6839747 | biostudies-literature | 2019 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Pressure-Assisted Fabrication of Perovskite Solar Cells.

Project description:This paper presents the results of a combined experimental and analytical/computational study of the effects of pressure on photoconversion efficiencies of perovskite solar cells (PSCs). First, an analytical model is used to predict the effects of pressure on interfacial contact in the multilayered structures of PSCs. The PSCs are then fabricated before applying a range of pressures to the devices to improve their interfacial surface contacts. The results show that the photoconversion efficiencies of PSCs increase by ~40%, for applied pressures between 0 and ~7?MPa. However, the photoconversion efficiencies decrease with increasing pressure beyond ~7?MPa. The implications of the results are discussed for the fabrication of efficient PSCs.

| S-EPMC7188881 | biostudies-literature

2D perovskite stabilized phase-pure formamidinium perovskite solar cells.

Project description:Compositional engineering has been used to overcome difficulties in fabricating high-quality phase-pure formamidinium perovskite films together with its ambient instability. However, this comes alongside an undesirable increase in bandgap that sacrifices the device photocurrent. Here we report the fabrication of phase-pure formamidinium-lead tri-iodide perovskite films with excellent optoelectronic quality and stability. Incorporation of 1.67?mol% of 2D phenylethylammonium lead iodide into the precursor solution enables the formation of phase-pure formamidinium perovskite with an order of magnitude enhanced photoluminescence lifetime. The 2D perovskite spontaneously forms at grain boundaries to protect the formamidinium perovskite from moisture and suppress ion migration. A stabilized power conversion efficiency (PCE) of 20.64% (certified stabilized PCE of 19.77%) is achieved with a short-circuit current density exceeding 24?mA?cm-2 and an open-circuit voltage of 1.130?V, corresponding to a loss-in-potential of 0.35?V, and significantly enhanced operational stability.

| S-EPMC6070510 | biostudies-literature

Meniscus-assisted solution printing of large-grained perovskite films for high-efficiency solar cells.

Project description:Control over morphology and crystallinity of metal halide perovskite films is of key importance to enable high-performance optoelectronics. However, this remains particularly challenging for solution-printed devices due to the complex crystallization kinetics of semiconductor materials within dynamic flow of inks. Here we report a simple yet effective meniscus-assisted solution printing (MASP) strategy to yield large-grained dense perovskite film with good crystallization and preferred orientation. Intriguingly, the outward convective flow triggered by fast solvent evaporation at the edge of the meniscus ink imparts the transport of perovskite solutes, thus facilitating the growth of micrometre-scale perovskite grains. The growth kinetics of perovskite crystals is scrutinized by in situ optical microscopy tracking to understand the crystallization mechanism. The perovskite films produced by MASP exhibit excellent optoelectronic properties with efficiencies approaching 20% in planar perovskite solar cells. This robust MASP strategy may in principle be easily extended to craft other solution-printed perovskite-based optoelectronics.

| S-EPMC5504348 | biostudies-literature

Thermal assisted oxygen annealing for high efficiency planar CH?NH?PbI? perovskite solar cells.

Project description:We report investigations on the influences of post-deposition treatments on the performance of solution-processed methylammonium lead triiodide (CH?NH?PbI?)-based planar solar cells. The prepared films were stored in pure N? at room temperature or annealed in pure O? at room temperature, 45°C, 65°C and 85°C for 12?hours prior to the deposition of the metal electrodes. It is found that annealing in O? leads to substantial increase in the power conversion efficiencies (PCEs) of the devices. Furthermore, strong dependence on the annealing temperature for the PCEs of the devices suggests that a thermally activated process may underlie the observed phenomenon. It is believed that the annealing process may facilitate the diffusion of O? into the spiro-MeOTAD for inducing p-doping of the hole transport material. Furthermore, the process can result in lowering the localized state density at the grain boundaries as well as the bulk of perovskite. Utilizing thermal assisted O? annealing, high efficiency devices with good reproducibility were attained. A PCE of 15.4% with an open circuit voltage (VOC) 1.04?V, short circuit current density (JSC) 23?mA/cm(2), and fill factor 0.64 had been achieved for our champion device.

| S-EPMC4208060 | biostudies-literature

Acetic Acid Assisted Crystallization Strategy for High Efficiency and Long-Term Stable Perovskite Solar Cell.

Project description:Improving the quality of perovskite poly-crystalline film is essential for the performance of associated solar cells approaching their theoretical limit efficiency. Pinholes, unwanted defects, and nonperovskite phase can be easily generated during film formation, hampering device performance and stability. Here, a simple method is introduced to prepare perovskite film with excellent optoelectronic property by using acetic acid (Ac) as an antisolvent to control perovskite crystallization. Results from a variety of characterizations suggest that the small amount of Ac not only reduces the perovskite film roughness and residual PbI2 but also generates a passivation effect from the electron-rich carbonyl group (C=O) in Ac. The best devices produce a PCE of 22.0% for Cs0.05FA0.80MA0.15Pb(I0.85Br0.15)3 and 23.0% for Cs0.05FA0.90MA0.05Pb(I0.95Br0.05)3 on 0.159 cm2 with negligible hysteresis. This further improves device stability producing a cell that maintained 96% of its initial efficiency after 2400 h storage in ambient environment (with controlled relative humidity (RH) <30%) without any encapsulation.

| S-EPMC7055551 | biostudies-literature

Generic water-based spray-assisted growth for scalable high-efficiency carbon-electrode all-inorganic perovskite solar cells.

Project description:A water-based spray-assisted growth strategy is proposed to prepare large-area all-inorganic perovskite films for perovskite solar cells (PSCs), which involves in spraying of cesium halide water solution onto spin-coating-deposited lead halide films, followed by thermal annealing. With CsPbBr3 as an example, we show that as-proposed growth strategy can enable the films with uniform surface, full coverage, pure phase, large grains, and high crystallinity, which primarily benefits from the controllable CsBr loading quantity, and the use of water as CsBr solvent makes the reaction between CsBr and PbBr2 immune to PbBr2 film microstructure. As a result, the small-area (0.09 cm2) and large-area (1.00 cm2) carbon-electrode CsPbBr3 PSCs yield the record-high efficiencies of 10.22% and 8.21%, respectively, coupled with excellent operational stability. We also illustrate that the water-based spray-assisted deposition strategy is suitable to prepare CsPbCl3, CsPbIBr2, and CsPbI2Br films with outstanding efficiencies of 1.27%, 10.44%, and 13.30%, respectively, for carbon-electrode PSCs.

| S-EPMC8590078 | biostudies-literature

Bication lead iodide 2D perovskite component to stabilize inorganic α-CsPbI<sub>3</sub> perovskite phase for high-efficiency solar cells.

Project description:Among various all-inorganic halide perovskites exhibiting better stability than organic-inorganic halide perovskites, α-CsPbI3 with the most suitable band gap for tandem solar cell application faces an issue of phase instability under ambient conditions. We discovered that a small amount of two-dimensional (2D) EDAPbI4 perovskite containing the ethylenediamine (EDA) cation stabilizes the α-CsPbI3 to avoid the undesirable formation of the nonperovskite δ phase. Moreover, not only the 2D perovskite of EDAPbI4 facilitate the formation of α-CsPbI3 perovskite films exhibiting high phase stability at room temperature for months and at 100°C for >150 hours but also the α-CsPbI3 perovskite solar cells (PSCs) display highly reproducible efficiency of 11.8%, a record for all-inorganic lead halide PSCs. Therefore, using the bication EDA presents a novel and promising strategy to design all-inorganic lead halide PSCs with high performance and reliability.

| S-EPMC5621977 | biostudies-literature

Intermediate Phase-Free Process for Methylammonium Lead Iodide Thin Film for High-Efficiency Perovskite Solar Cells.

Project description:Solvent engineering by Lewis-base solvent and anti-solvent is well known for forming uniform and stable perovskite thin films. The perovskite phase crystallizes from an intermediate Lewis-adduct upon annealing-induced crystallization. Herein, it is explored the effects of trimethyl phosphate (TMP), as a novel aprotic Lewis-base solvent with a low donor number for the perovskite film formation and photovoltaic characteristics of perovskite solar cells (PSCs). As compared to dimethylsulfoxide (DMSO) or dimethylformamide (DMF), the usage of TMP directly crystallizes the perovskite phase, i.e., reduces the intermediate phase to a negligible degree, right after the spin-coating, owing to the high miscibility of TMP with the anti-solvent and weak bonding in the Lewis adduct. Interestingly, the PSCs based on methylammonium lead iodide (MAPbI3 ) derived from TMP/DMF-mixed solvent exhibit a higher average power conversion efficiency of 19.68% (the best: 20.02%) with a smaller hysteresis in the current-voltage curve, compared to the PSCs that are fabricated using DMSO/DMF-mixed (19.14%) or DMF-only (18.55%) solvents. The superior photovoltaic properties are attributed to the lower defect density of the TMP/DMF-derived perovskite film. The results indicate that a high-performance PSC can be achieved by combining a weak Lewis base with a well-established solvent engineering process.

| S-EPMC8564438 | biostudies-literature

Multi-Walled Carbon Nanotube-Assisted Encapsulation Approach for Stable Perovskite Solar Cells.

Project description:Perovskite solar cells (PSCs) are regarded as the next-generation thin-film energy harvester, owing to their high performance. However, there is a lack of studies on their encapsulation technology, which is critical for resolving their shortcomings, such as their degradation by oxygen and moisture. It is determined that the moisture intrusion and the heat trapped within the encapsulating cover glass of PSCs influenced the operating stability of the devices. Therefore, we improved the moisture and oxygen barrier ability and heat releasing capability in the passivation of PSCs by adding multi-walled carbon nanotubes to the epoxy resin used for encapsulation. The 0.5 wt% of carbon nanotube-added resin-based encapsulated PSCs exhibited a more stable operation with a ca. 30% efficiency decrease compared to the ca. 63% decrease in the reference devices over one week under continuous operation. Specifically, the short-circuit current density and the fill factor, which are affected by moisture and oxygen-driven degradation, as well as the open-circuit voltage, which is affected by thermal damage, were higher for the multi-walled carbon nanotube-added encapsulated devices than the control devices, after the stability test.

| S-EPMC8399998 | biostudies-literature

Planar Metasurfaces Enable High-Efficiency Colored Perovskite Solar Cells.

Project description:The achievement of perfect light absorption in ultrathin semiconductor materials is not only a long-standing goal, but also a critical challenge for solar energy applications, and thus requires a redesigned strategy. Here, a general strategy is demonstrated both theoretically and experimentally to create a planar metasurface absorber comprising a 1D ultrathin planar semiconductor film (replacing the 2D array of subwavelength elements in classical metasurfaces), a transparent spacer, and a metallic back reflector. Guided by derived formulisms, a new type of macroscopic planar metasurface absorber is experimentally demonstrated with light near-perfectly and exclusively absorbed by the ultrathin semiconductor film. To demonstrate the power and simplicity of this strategy, a prototype of a planar metasurface solar cell is experimentally demonstrated. Furthermore, the device model predicts that a colored planar metasurface perovskite solar cell can maintain 75% of the efficiency of its black counterpart despite the use of a perovskite film that is one order of magnitude thinner. The displayed cell colors have high purities comparable to those of state-of-the-art color filters, and are insensitive to viewing angles up to 60°. The general theoretical framework in conjunction with experimental demonstrations lays the foundation for designing miniaturized, planar, and multifunctional solar cells and optoelectronic devices.

| S-EPMC6193155 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data