Browse
Submit Data
Databases
API
Help

Dataset Information

27 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Investigation of Photophysical Properties of Ternary Zn-Ga-S Quantum Dots: Band Gap versus Sub-Band-Gap Excitations and Emissions.

ABSTRACT: Highly luminescent ternary Zn-Ga-S quantum dots (QDs) were synthesized via a noninjection method by varying Zn/Ga ratios. X-ray diffraction and Raman investigations demonstrate composition-dependent changes with multiple phases including ZnGa2S4, ZnS, and Ga2S3 in all samples. Two distinct excitation pathways were identified from absorption and photoluminescence excitation spectra; among them, one is due to the band-gap transition appearing at around 375 and 395 nm, whereas another one observed nearby 505 nm originates from sub-band-gap defect states. Photoluminescence (PL) spectra of these QDs depict multiple emission noticeable at around 410, 435, 461, and 477 nm arising from crystallographic point defects formed within the band gap. The origin of these defects including zinc interstitials (IZn), zinc vacancies (VZn), sulfur interstitials (IS), sulfur vacancies (VS), and gallium vacancies (VGa) has been discussed in detail by proposing an energy-level diagram. Further, the time-dependent PL decay curve strongly suggests that the tail emission (appear around 477 nm) in these ternary QDs arises due to donor-acceptor pair recombination. This study enables us to understand the PL mechanism in new series of Zn-Ga-S ternary QDs and can be useful for the future utilization of these QDs in photovoltaic and display devices.

SUBMITTER: Yadav AN

PROVIDER: S-EPMC6844091 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Mn-Doped Quinary Ag-In-Ga-Zn-S Quantum Dots for Dual-Modal Imaging.

Project description:Doping of transition metals within a semiconductor quantum dot (QD) has a high impact on the optical and magnetic properties of the QD. In this study, we report the synthesis of Mn2+-doped Ag-In-Ga-Zn-S (Mn:AIGZS) QDs via thermolysis of a dithiocarbamate complex of Ag+, In3+, Ga3+, and Zn2+ and of Mn(stearate)2 in oleylamine. The influence of the Mn2+ loading on the photoluminescence (PL) and magnetic properties of the dots are investigated. Mn:AIGZS QDs exhibit a diameter of ca. 2 nm, a high PL quantum yield (up to 41.3% for a 2.5% doping in Mn2+), and robust photo- and colloidal stabilities. The optical properties of Mn:AIGZS QDs are preserved upon transfer into water using the glutathione tetramethylammonium ligand. At the same time, Mn:AIGZS QDs exhibit high relaxivity (r 1 = 0.15 mM-1 s-1 and r 2 = 0.57 mM-1 s-1 at 298 K and 2.34 T), which shows their potential applicability for bimodal PL/magnetic resonance imaging (MRI) probes.

| S-EPMC8655898 | biostudies-literature

Ga for Zn Cation Exchange Allows for Highly Luminescent and Photostable InZnP-Based Quantum Dots.

Project description:In this work, we demonstrate that a preferential Ga-for-Zn cation exchange is responsible for the increase in photoluminescence that is observed when gallium oleate is added to InZnP alloy QDs. By exposing InZnP QDs with varying Zn/In ratios to gallium oleate and monitoring their optical properties, composition, and size, we conclude that Ga3+ preferentially replaces Zn2+, leading to the formation of InZnP/InGaP core/graded-shell QDs. This cation exchange reaction results in a large increase of the QD photoluminescence, but only for InZnP QDs with Zn/In ≥ 0.5. For InP QDs that do not contain zinc, Ga is most likely incorporated only on the quantum dot surface, and a PL enhancement is not observed. After further growth of a GaP shell and a lattice-matched ZnSeS outer shell, the cation-exchanged InZnP/InGaP QDs continue to exhibit superior PL QY (over 70%) and stability under long-term illumination (840 h, 5 weeks) compared to InZnP cores with the same shells. These results provide important mechanistic insights into recent improvements in InP-based QDs for luminescent applications.

| S-EPMC5503176 | biostudies-literature

Size-Dependent Band-Gap and Molar Absorption Coefficients of Colloidal CuInS<sub>2</sub> Quantum Dots.

Project description:The knowledge of the quantum dot (QD) concentration in a colloidal suspension and the quantitative understanding of the size-dependence of the band gap of QDs are of crucial importance from both applied and fundamental viewpoints. In this work, we investigate the size-dependence of the optical properties of nearly spherical wurtzite (wz) CuInS2 (CIS) QDs in the 2.7 to 6.1 nm diameter range (polydispersity ≤10%). The QDs are synthesized by partial Cu+ for In3+ cation exchange in template Cu2- xS nanocrystals, which yields CIS QDs with very small composition variations (In/Cu = 0.91 ± 0.11), regardless of their sizes. These well-defined QDs are used to investigate the size-dependence of the band gap of wz CIS QDs. A sizing curve is also constructed for chalcopyrite CIS QDs by collecting and reanalyzing literature data. We observe that both sizing curves follow primarily a 1/ d dependence. Moreover, the molar absorption coefficients and the absorption cross-section per CIS formula unit, both at 3.1 eV and at the band gap, are analyzed. The results demonstrate that the molar absorption coefficients of CIS QDs follow a power law at the first exciton transition energy (ε E1 = 5208 d2.45) and scale with the QD volume at 3.1 eV. This latter observation implies that the absorption cross-section per unit cell at 3.1 eV is size-independent and therefore can be estimated from bulk optical constants. These results also demonstrate that the molar absorption coefficients at 3.1 eV are more reliable for analytical purposes, since they are less sensitive to size and shape dispersion.

| S-EPMC6117745 | biostudies-literature

Photophysical Properties of Multilayer Graphene-Quantum Dots Hybrid Structures.

Project description:Photoelectrical and photoluminescent properties of multilayer graphene (MLG)-quantum dots (QD) hybrid structures have been studied. It has been shown that the average rate of transfer from QDs to the MLG can be estimated via photoinduced processes on the QDs' surfaces. A monolayer of CdSe QDs can double the photoresponse amplitude of multilayer graphene, without influencing its characteristic photoresponse time. It has been found that efficient charge or energy transfer from QDs to MLG with a rate higher than 3 × 108 s-1 strongly inhibits photoinduced processes on the QD surfaces and provides photostability for QD-based structures.

| S-EPMC7221764 | biostudies-literature

Enhanced UV Emission of GaN Nanowires Functionalized by Wider Band Gap Solution-Processed p-MnO Quantum Dots.

Project description:GaN-based UV light-emitting devices suffer from low efficiency. To mitigate this issue, we hybridized GaN nanowires (NWs) grown on Si substrates by plasma-assisted molecular beam epitaxy with solution-processed p-type MnO quantum dots (QDs) characterized by a wider band gap (∼5 eV) than that of GaN. Further investigations reveal that the photoluminescence intensity of the GaN NWs increases up to ∼3.9-fold (∼290%) after functionalizing them with p-MnO QDs, while the internal quantum efficiency is improved by ∼1.7-fold. Electron energy loss spectroscopy (EELS) incorporated into transmission electron microscopy reveals an increase in the density of states in QD-decorated NWs compared to the bare ones. The advanced optical and EELS analyses indicate that the energy transfer from the wider band gap p-MnO QDs to n-GaN NW can lead to substantial emission enhancement and greater radiative recombination contribution because of the good band alignment between MnO QDs and GaN NWs. This work provides valuable insights into an environmentally friendly strategy for improving UV device performance.

| S-EPMC7497627 | biostudies-literature

Graphitic Dots Combining Photophysical Characteristics of Organic Molecular Fluorophores and Inorganic Quantum Dots.

Project description:Thanks to their photophysical properties, both organic molecular fluorophores (MFs) and inorganic quantum dots (QDs) are extensively used for bioimaging applications. However, limitations such as photobleaching for the former or blinking, size, and toxicity for the latter still constitute a challenge for numerous applications. We report here that embedding MFs in graphitic carbon dots (GDs) results in fluorophores which entirely tackle this challenge. Characterized by ultranarrow, bright, and excitation-independent emission devoid of blinking and photobleaching, these hybrid-featured nanoparticles also demonstrate their unique photophysical performances at the single-nanoparticle scale, making them appealing candidates for bioimaging applications.

| S-EPMC8395659 | biostudies-literature

A Generalized Semiempirical Approach to the Modeling of the Optical Band Gap of Ternary Al-(Ga, Nb, Ta, W) Oxides Containing Different Alumina Polymorphs.

Project description:A generalization of the modeling equation of optical band gap values for ternary oxides, as a function of cationic ratio composition, is carried out based on the semiempirical correlation between the differences in the electronegativity of oxygen and the average cationic electronegativity proposed some years ago. In this work, a novel approach is suggested to account for the differences in the band gap values of the different polymorphs of binary oxides as well as for ternary oxides existing in different crystalline structures. A preliminary test on the validity of the proposed modeling equations has been carried out by using the numerous experimental data pertaining to alumina and gallia polymorphs as well as the crystalline ternary Ga(1-x)AlxO3 polymorphs (α-Ga(1-x)AlxO3 and β-Ga(1-x)AlxO3) covering a large range of optical band gap values (4.50-8.50 eV). To make a more rigorous test of the modeling equation, we extended our investigation to amorphous ternary oxides anodically formed on Al-d-metal alloys (Al-Nb, Al-Ta, and Al-W) covering a large range of d-metal composition (xd-metal ≥ 0.2). In the last case, the novel approach allows one to overcome some difficulties experienced in fitting the optical band gap dependence from the Al-d-metal mixed anodic oxide composition as well as to provide a rationale for the departure, at the lowest d-metal content (xd-metal < 0.2), from the behavior observed for anodic films containing higher d-metal content.

| S-EPMC7877732 | biostudies-literature

Photon upconversion utilizing energy beyond the band gap of crystalline silicon with a hybrid TES-ADT/PbS quantum dots system.

Project description:The recent introduction of inorganic semiconductor quantum dots (QDs) as triplet sensitizers for molecular semiconductors has led to significant interest in harvesting low energy photons, which can then be used for photon upconversion (PUC), via triplet-triplet annihilation (TTA). A key goal is the harvesting of photons from below the bandgap of crystalline silicon 1.12 eV (≈1100 nm) and their upconversion into the visible region. In practice, the systems demonstrated so far have been limited to harvesting photons with energies above 1.2 eV (≈1 μm), due to two reasons: firstly the need to use transmitter ligands which allow efficient energy harvesting from the QD but introduce an energy loss of larger than 200 meV in transmission from the QD to the annihilator, and secondly due to the use of molecules such as tetracene which cannot accept smaller energy than 1.2 eV. Here, we introduce a new strategy to overcome these difficulties by using a low energy triplet annihilator that also harvests excitations efficiently from QDs. Specifically, we show that 5,11-bis(triethylsilylethynyl)anthradithiophene (TES-ADT, triplet energy of 1.08 eV: ca. 1150 nm) functions as a triplet annihilator (20% TTA efficiency) while also rapidly extracting triplet excitons from lead sulfide (PbS) QDs with a rate constant of k = ca. 2 × 10-8 s-1 with an excitation at 1064 nm. This rate is consistent with an orbital overlap between TES-ADT and PbS QDs, which we propose is due to the thiophene group of TES-ADT, which enables a close association with the PbS surface, allowing this system to function both as annihilator and transmitter. Our results pave the way for the design of triplet annihilators that can closely associate with the QD surface and harvest low energy excitons with minute losses in energy during the TET process, with the ultimate goal of efficiently utilizing photon energy beyond the bandgap of crystalline silicon.

| S-EPMC6510314 | biostudies-literature

Effect of electronic acceptor segments on photophysical properties of low-band-gap ambipolar polymers.

Project description:Stimulated by a recent experimental report, charge transfer and photophysical properties of donor-acceptor ambipolar polymer were studied with the quantum chemistry calculation and the developed 3D charge difference density method. The effects of electronic acceptor strength on the structure, energy levels, electron density distribution, ionization potentials, and electron affinities were also obtained to estimate the transporting ability of hole and electron. With the developed 3D charge difference density, one visualizes the charge transfer process, distinguishes the role of molecular units, and finds the relationship between the role of DPP and excitation energy for the three polymers during photo-excitation.

| S-EPMC3556892 | biostudies-literature