Browse
Submit Data
Databases
API
Help

Dataset Information

30 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Air-Stable Aerophobic Polydimethylsiloxane Tube with Efficient Self-Removal of Air Bubbles.

ABSTRACT: The adherence of underwater air bubbles to surfaces is a serious cause of malfunction in applications such as microfluidics, transport, and space devices. However, realizing spontaneous and additional unpowered transport of underwater air bubbles inside tubes remains challenging. Although superhydrophilic polydimethylsiloxane (PDMS) tubes are attracting attention as air bubble repellents, superhydrophilic PDMS, which is fabricated via oxygen plasma treatment, has a disadvantage in that it is weak against aging. Here, we present a tube with the ability to self-remove air bubbles, which overcomes the drawback of rapid aging. PDMS containing Silwet L-77 with a hierarchical nano-microstructure exhibiting subaqueous aerophobicity was fabricated. We conducted adherence and saturation experiments of air bubbles using the fabricated PDMS tube with Silwet L-77 to investigate the mechanism of bubbles adhering to and separating from the fabricated tube surface. The developed PDMS with Silwet L-77 exhibits a strong self-removal effect with an air bubble removal of 97.7%. The adherence and saturation experiments suggest that the transparent superhydrophilic-underwater aerophobic PDMS is a potentially exceptional tool for spontaneously separating air bubbles attached to tube surfaces.

SUBMITTER: Park J

PROVIDER: S-EPMC6844094 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Extreme long-lifetime self-assembled monolayer for air-stable molecular junctions.

Project description:The molecular electronic devices based on self-assembled monolayer (SAM) on metal surfaces demonstrate novel electronic functions for device minimization yet are unable to realize in practical applications, due to their instability against oxidation of the sulfur-metal bond. This paper describes an alternative to the thiolate anchoring group to form stable SAMs on gold by selenides anchoring group. Because of the formation of strong selenium-gold bonds, these stable SAMs allow us to incorporate them in molecular tunnel junctions to yield extremely stable junctions for over 200 days. A detailed structural characterization supported by spectroscopy and first-principles modeling shows that the oxidation process is much slower with the selenium-gold bond than the sulfur-gold bond, and the selenium-gold bond is strong enough to avoid bond breaking even when it is eventually oxidized. This proof of concept demonstrates that the extraordinarily stable SAMs derived from selenides are useful for long-lived molecular electronic devices and can possibly become important in many air-stable applications involving SAMs.

| S-EPMC10584343 | biostudies-literature

Efficient Removal of Copper Ion from Wastewater Using a Stable Chitosan Gel Material.

Project description:: Gel adsorption is an efficient method for the removal of metal ion. In the present study, a functional chitosan gel material (FCG) was synthesized successfully, and its structure was detected by different physicochemical techniques. The as-prepared FCG was stable in acid and alkaline media. The as-prepared material showed excellent adsorption properties for the capture of Cu2+ ion from aqueous solution. The maximum adsorption capacity for the FCG was 76.4 mg/g for Cu2+ ion (293 K). The kinetic adsorption data fits the Langmuir isotherm, and experimental isotherm data follows the pseudo-second-order kinetic model well, suggesting that it is a monolayer and the rate-limiting step is the physical adsorption. The separation factor (RL) for Langmuir and the 1/n value for Freundlich isotherm show that the Cu2+ ion is favorably adsorbed by FCG. The negative values of enthalpy (ΔH°) and Gibbs free energy (ΔG°) indicate that the adsorption process are exothermic and spontaneous in nature. Fourier transform infrared (FTIR) spectroscopy and x-ray photoelectron spectroscopy (XPS) analysis of FCG before and after adsorption further reveal that the mechanism of Cu2+ ion adsorption. Further desorption and reuse experiments show that FCG still retains 96% of the original adsorption following the fifth adsorption-desorption cycle. All these results indicate that FCG is a promising recyclable adsorbent for the removal of Cu2+ ion from aqueous solution.

| S-EPMC6930644 | biostudies-literature

Circumventing surface tension: tadpoles suck bubbles to breathe air.

Project description:The surface tension of water provides a thin, elastic membrane upon which many tiny animals are adapted to live and move. We show that it may be equally important to the minute animals living beneath it by examining air-breathing mechanics in five species (three families) of anuran (frog) tadpoles. Air-breathing is essential for survival and development in most tadpoles, yet we found that all tadpoles at small body sizes were unable to break through the water's surface to access air. Nevertheless, by 3 days post-hatch and only 3 mm body length, all began to breathe air and fill the lungs. High-speed macrovideography revealed that surface tension was circumvented by a novel behaviour we call 'bubble-sucking': mouth attachment to the water's undersurface, the surface drawn into the mouth by suction, a bubble 'pinched off' within the mouth, then compressed and forced into the lungs. Growing tadpoles transitioned to air-breathing via typical surface breaching. Salamander larvae and pulmonate snails were also discovered to 'bubble-suck', and two insects used other means of circumvention, suggesting that surface tension may have a broader impact on animal phenotypes than hitherto appreciated.

| S-EPMC7062013 | biostudies-literature

Melting of glacier ice enhanced by bursting air bubbles

Project description: Not available

| S-EPMC10555835 | biostudies-literature

Stable low-fouling plasma polymer coatings on polydimethylsiloxane.

Project description:Polydimethylsiloxane (DMS) is a popular material for microfluidics, but it is hydrophobic and is prone to non-specific protein adsorption. In this study, we explore methods for producing stable, protein resistant, tetraglyme plasma polymer coatings on PDMS by combining extended baking processes with multiple plasma polymer coating steps. We demonstrate that by using this approach, it is possible to produce a plasma polymer coatings that resist protein adsorption (<10 ng/cm(2)) and are stable to storage over at least 100 days. This methodology can translate to any plasma polymer system, enabling the introduction of a wide range of surface functionalities on PDMS surfaces.

| S-EPMC3470602 | biostudies-other

Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity.

Project description:Poor stability of organic-inorganic halide perovskite materials in humid condition has hindered the success of perovskite solar cells in real applications since controlled atmosphere is required for device fabrication and operation, and there is a lack of effective solutions to this problem until now. Here we report the use of lead (II) thiocyanate (Pb(SCN)2) precursor in preparing perovskite solar cells in ambient air. High-quality CH3NH3PbI3-x(SCN)x perovskite films can be readily prepared even when the relative humidity exceeds 70%. Under optimized processing conditions, we obtain devices with an average power conversion efficiency of 13.49% and the maximum efficiency over 15%. In comparison with typical CH3NH3PbI3-based devices, these solar cells without encapsulation show greatly improved stability in humid air, which is attributed to the incorporation of thiocyanate ions in the crystal lattice. The findings pave a way for realizing efficient and stable perovskite solar cells in ambient atmosphere.

| S-EPMC4821988 | biostudies-literature

High-performance particulate matter including nanoscale particle removal by a self-powered air filter.

Project description:Particulate matter (PM) pollutants, including nanoscale particles (NPs), have been considered serious threats to public health. In this work, a self-powered air filter that can be used in high-efficiency removal of PM, including NPs, is presented. An ionic liquid-polymer (ILP) composite is irregularly distributed onto a sponge network to form an ILP@MF filter. Enabled by its unique electrochemical properties, the ILP@MF filter can remove PM2.5 and PM10 with high efficiencies of 99.59% and 99.75%, respectively, after applying a low voltage. More importantly, the charged ILP@MF filter realizes a superior removal for NPs with an efficiency of 93.77%. A micro-button lithium cell or silicon-based solar panel is employed as a power supply platform to fabricate a portable and self-powered face mask, which exhibits excellent efficacy in particulate removal compared to commercial masks. This work shows a great promise for high-performance purification devices and facile mask production to remove particulate pollutants.

| S-EPMC7125120 | biostudies-literature

Prevention of Microsphere Blockage in Catheter Tubes Using Convex Air Bubbles.

Project description:This paper presents a novel method to prevent blockages by embolic microspheres in catheter channels by using convex air bubbles attached to the channels' inner wall surface. The clogging by microspheres can occur by the arching of the microspheres in the catheter. A few studies have been done on reducing the blockage, but their methods are not suitable for use with embolic catheters. In this study, straight catheter channels were fabricated. They had cavities to form convex air bubbles; additionally, a straight channel without the cavities was designed for comparison. Blockage was observed in the straight channel without the cavities, and the blockage arching angle was measured to be 70°, while no blockage occurred in the cavity channel with air bubbles, even at a geometrical arching angle of 85°. The convex air bubbles have an important role in preventing blockages by microspheres. The slip effect on the air bubble surface and the centrifugal effect make the microspheres drift away from the channel wall. It was observed that as the size of the cavity was increased, the drift distance became larger. Additionally, as more convex air bubbles were formed, the amount of early drift to the center increased. It will be advantageous to design a catheter with large cavities that have a small interval between them.

| S-EPMC7760967 | biostudies-literature

Highly Hydrophobic Polydimethylsiloxane-Coated Expanded Vermiculite Sorbents for Selective Oil Removal from Water.

Project description:Naturally abundant vermiculite clay was expanded by using an aqueous solution of H2O2 and its surface was modified with ultra-thin polydimethylsiloxane (PDMS) using facile thermal vapor deposition to prepare an ecologically friendly, low-cost oil sorbent that plays an important role in oil spillage remediation. The resulting PDMS-coated expanded vermiculite (eVMT@PDMS) particles exhibited adequate hydrophobicity and oleophilicity for oil/water separation, with numerous conical slit pores (a size of 0.1-100 μm) providing a great sorption capacity and an efficient capillarity-driven flow pathway for oil collection. Simply with using a physically-packed eVMT@PDMS tube (or pouch), selective oil removals were demonstrated above and beneath the surface of the water. Furthermore, these sorbents were successfully integrated and then applied to the advanced oil-collecting devices such as a barrel-shaped oil skimmer and a self-primed oil pump.

| S-EPMC7912906 | biostudies-literature

Nickel-Doped Silver Sulfide: An Efficient Air-Stable Electrocatalyst for Hydrogen Evolution from Neutral Water.

Project description:A low-cost, platinum-free electrocatalyst for hydrogen (H2) generation via the water splitting reaction holds great promise to meet the demand of clean and sustainable energy sources. Recent studies are mainly concerned with semiconducting materials like sulfides, selenides, and phosphides of different transition metals as electrocatalysts. Doping of the transition metals within the host matrix is a good strategy to improve the electrocatalytic activity of the host material. However, this activity largely depends on the nature of the dopant metal and its host matrix as well. To exploit this idea, here, in the present work, we have synthesized semiconducting Ag2S nanoparticles and successfully doped them with different transition metals like Mn, Fe, Co, and Ni to study their electrocatalytic activity for the hydrogen evolution reaction from neutral water (pH = 7). Among the systems doped with these transition metals, the Ni-doped Ag2S (Ni-Ag2S) system shows a very low overpotential (50 mV) with high catalytic current in neutral water. The trend in electrocatalytic activity of different transition metals has also been explained. The Ni-Ag2S system also shows very good stability in ambient atmosphere over a long period of time and suffers no catalytic degradation in the presence of oxygen. Structural characterizations are carried out using X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy to establish the phase purity and morphology of the materials.

| S-EPMC6644178 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data