Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Cooperative Catalysis of Methane Oxidation through Modulating the Stabilization of PdO and Electronic Properties over Ti-Doped Alumina-Supported Palladium Catalysts.

ABSTRACT: Poor low-temperature catalytic activity and durability are the main drawbacks of palladium-based catalysts for methane combustion. Herein, stable and active PdO particles are constructed by incorporating Ti into an alumina support, which makes the catalysts exhibit satisfactory methane combustion activity. The results of comprehensive characterization reveal that an appropriate amount of Ti doping induces the optimization of electron transfer and distribution, thus contributing to the construction and stabilization of active PdO lattices. The reactive oxygen mobility is improved and the optimal PdO/Pd⁰ combination is achieved, thanks to the amplified PdO-support interaction. In addition, the acid-base properties are regulated and Brønsted acid sites are generated by virtue of the adjustment of electronic properties, which facilitate stabilization of PdO as well. Hence, the Ti-containing catalyst exhibits superior activity for methane oxidation at low temperatures. Notably, the activity and cyclic performance of the catalyst can be further enhanced when undergoing long-term and isothermal heat treatment under the reactant stream and methane, and it demonstrates a high performance with 90% CH₄ conversion at 340 °C.

SUBMITTER: Chen B

PROVIDER: S-EPMC6854561 | biostudies-literature | 2019 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Onset of High Methane Combustion Rates over Supported Palladium Catalysts: From Isolated Pd Cations to PdO Nanoparticles.

Project description:Industrial low-temperature methane combustion catalyst Pd/Al2O3 suffers from H2O-induced deactivation. It is imperative to design Pd catalysts free from this deactivation and with high atomic efficiency. Using a small-pore zeolite SSZ-13 as support, herein we report well-defined Pd catalysts with dominant active species as finely dispersed Pd cations, uniform PdO particles embedded inside the zeolite framework, or PdO particles decorating the zeolite external surface. Through detailed reaction kinetics and spectroscopic and microscopic studies, we show that finely dispersed sites are much less active than PdO nanoparticles. We further demonstrate that H2O-induced deactivation can be readily circumvented by using zeolite supports with high Si/Al ratios. Finally, we provide a few rational catalyst design suggestions for methane oxidation based on the new knowledge learned in this study.

| S-EPMC8395651 | biostudies-literature

Interfacial charge distributions in carbon-supported palladium catalysts.

Project description:Controlling the charge transfer between a semiconducting catalyst carrier and the supported transition metal active phase represents an elite strategy for fine turning the electronic structure of the catalytic centers, hence their activity and selectivity. These phenomena have been theoretically and experimentally elucidated for oxide supports but remain poorly understood for carbons due to their complex nanoscale structure. Here, we combine advanced spectroscopy and microscopy on model Pd/C samples to decouple the electronic and surface chemistry effects on catalytic performance. Our investigations reveal trends between the charge distribution at the palladium-carbon interface and the metal's selectivity for hydrogenation of multifunctional chemicals. These electronic effects are strong enough to affect the performance of large (~5?nm) Pd particles. Our results also demonstrate how simple thermal treatments can be used to tune the interfacial charge distribution, hereby providing a strategy to rationally design carbon-supported catalysts.Control over charge transfer in carbon-supported metal nanoparticles is essential for designing new catalysts. Here, the authors show that thermal treatments effectively tune the interfacial charge distribution in carbon-supported palladium catalysts with consequential changes in hydrogenation performance.

| S-EPMC5569089 | biostudies-other

Hydrodeoxygenation of Isoeugenol over Alumina-Supported Ir, Pt, and Re Catalysts.

Project description:Hydrodeoxygenation (HDO) of isoeugenol (IE) was investigated using bimetallic iridium-rhenium and platinum-rhenium catalysts supported on alumina in the temperature and pressure ranges of 200-250 °C and 17-40 bar in nonpolar dodecane as a solvent. The main parameters were catalyst type, hydrogen pressure, and initial concentration. Nearly quantitative yield of the desired product, propylcyclohexane (PCH), at complete conversion in 240 min was obtained with Ir-Re/Al2O3 prepared by the deposition-precipitation method using 0.1 mol/L IE initial concentration. High iridium dispersion together with a modification effect of rhenium provided in situ formation of the IrRe active component with reproducible catalytic activity for selective HDO of IE to PCH. The reaction rate was shown to increase with the increasing initial IE concentration promoting also HDO and giving a higher liquid phase mass balance. Increasing hydrogen pressure benefits the PCH yield.

| S-EPMC6292701 | biostudies-literature

Stable complete methane oxidation over palladium based zeolite catalysts.

Project description:Increasing the use of natural gas engines is an important step to reduce the carbon footprint of mobility and power generation sectors. To avoid emissions of unburnt methane and the associated severe greenhouse effect of lean-burn engines, the stability of methane oxidation catalysts against steam-induced sintering at low temperatures (<500?°C) needs to be improved. Here we demonstrate how the combination of catalyst development and improved process control yields a highly efficient solution for complete methane oxidation. We design a material based on palladium and hierarchical zeolite with fully sodium-exchanged acid sites, which improves the support stability and prevents steam-induced palladium sintering under reaction conditions by confining the metal within the zeolite. Repeated short reducing pulses enable the use of a highly active transient state of the catalyst, which in combination with its high stability provides excellent performance without deactivation for over 90?h in the presence of steam.

| S-EPMC6026177 | biostudies-literature

Effective Dehydration of Fructose Over Stable Ti-Doped SBA-15 Catalysts.

Project description:High-effective synthesis of 5-hydroxymethylfurfural (HMF) from carbohydrates is an interesting reaction among biomass valorization. The as-synthesized Ti-SBA-15 catalysts with mesoporous structures showed high catalytic efficiency for the conversion of fructose to HMF. Ti-SBA-15 catalysts with different Si/Ti ratios were characterized by characterization techniques such as elemental analysis, XRD, TEM, N2 adsorption-desorption, NH3-TPD, and pyridine-FTIR. The acidity of Ti-SBA-15 catalysts could be tuned by altering addition amount of titanium. The effects of reaction conditions, including reaction time, temperature, and amount of catalyst, on the conversions of fructose and the yields of HMF were also investigated. It is found that Ti-SBA-15 catalysts whose Si/Ti ratio is 120 gave the best yields of HMF, which demonstrated 100% conversion of fructose with a maximum HMF yield of 82% at 140°C after 1 h. In addition, its catalytic performance was retained after 5 recycles in fructose conversion reaction, proving its good catalytic stability.

| S-EPMC8769218 | biostudies-literature

Liquid Phase Hydrogenation of Pharmaceutical Interest Nitroarenes over Gold-Supported Alumina Nanowires Catalysts.

Project description:In this work, Au nanoparticles, supported in Al2O3 nanowires (ANW) modified with (3-aminopropyl)trimethoxysilane were synthetized, for their use as catalysts in the hydrogenation reaction of 4-(2-fluoro-4-nitrophenyl)-morpholine and 4-(4-nitrophenyl)morpholin-3-one. ANW was obtained by hydrothermal techniques and the metal was incorporated by the reduction of the precursor with NaBH4 posterior to superficial modification. The catalysts were prepared at different metal loadings and were characterized by different techniques. The characterization revealed structured materials in the form of nanowires and a successful superficial modification. All catalysts show that Au is in a reduced state and the shape of the nanoparticles is spherical, with high metal dispersion and size distributions from 3.7 to 4.6 nm. The different systems supported in modified-ANW were active and selective in the hydrogenation reaction of both substrates, finding for all catalytic systems a selectivity of almost 100% to the aromatic amine. Catalytic data showed pseudo first-order kinetics with respect to the substrate for all experimental conditions used in this work. The solvent plays an important role in the activity and selectivity of the catalyst, where the highest efficiency and operational stability was achieved when ethanol was used as the solvent.

| S-EPMC7078662 | biostudies-literature

Molecular Characteristics of Light Cycle Oil Hydrodesulfurization over Silica-Alumina-Supported NiMo Catalysts.

Project description:A detailed understanding of the catalytic upgrading of light cycle oil (LCO) is important to achieve effective deep hydrodesulfurization (HDS) when LCO is mixed with straight run gas oil in the diesel pool. Herein, HDS of polyaromatic-rich LCO was studied at the molecular level over three NiMo catalysts on silica-alumina supports, which were synthesized on the pilot scale using different silica/alumina mixing procedures. Gas chromatography with atomic emission detection and two-dimensional gas chromatography with time-of-flight mass spectrometry were used to evaluate the HDS performance through determining the feed and product compositions, respectively, at the molecular level. Furthermore, the textural properties of the catalysts were evaluated using Raman spectroscopy, transmission electron microscopy, and the temperature-programmed desorption of NH3. The performance of the best catalyst was attributed to its higher content of octahedrally coordinated Mo oxide species, a lower number of layered stacks, and the more acidic sites on the surface. In addition, the hydrotreating reactivity of various family groups in LCO over the catalyst was investigated.

| S-EPMC7689679 | biostudies-literature

On the Chemistry of Iron Oxide Supported on γ-Alumina and Silica Catalysts.

Project description:Catalysts of iron oxide on γ-alumina and silica which were prepared by an incipient wetness impregnation technique have been investigated in an effort to understand how the surface chemical properties are influenced by the nature of the supports. Surprisingly, this is the first study to compare in depth the influence of the supports on physicochemical parameters such as acidity, site nuclearity, and reducibility. In this study, surface characterisation techniques including N2 physisorption at -196 °C, ammonia temperature-programmed desorption, inductively coupled plasma optical emission spectrometry, temperature-programmed reduction with hydrogen, CO-chemisorption, scanning electron microscopy, transmission electron microscopy, and NO adsorption by in situ Fourier transform infrared spectroscopy have been performed to understand the different surface reactions occurring over the two different supports. The aim of this study is to ascertain the primary differences between these two catalysts using several catalyst characterization techniques and correlate their chemical and structural differences to their catalytic activity in the conversion of 2-chlorophenol. The results disclose a higher density of acid sites, a smaller particle size of iron oxide, stabilization of Fe(II) aluminate after reduction on the alumina surface, and finally, the formation of isolated iron cations on the surface of alumina which are notably absent on the silica-supported catalyst.

| S-EPMC6641962 | biostudies-literature

Recover the activity of sintered supported catalysts by nitrogen-doped carbon atomization.

Project description:The sintering of supported metal nanoparticles is a major route to the deactivation of industrial heterogeneous catalysts, which largely increase the cost and decrease the productivity. Here, we discover that supported palladium/gold/platinum nanoparticles distributed at the interface of oxide supports and nitrogen-doped carbon shells would undergo an unexpected nitrogen-doped carbon atomization process against the sintering at high temperatures, during which the nanoparticles can be transformed into more active atomic species. The in situ transmission electron microscopy images reveal the abundant nitrogen defects in carbon shells provide atomic diffusion sites for the mobile atomistic palladium species detached from the palladium nanoparticles. More important, the catalytic activity of sintered and deactivated palladium catalyst can be recovered by this unique N-doped carbon atomization process. Our findings open up a window to preparation of sintering-resistant single atoms catalysts and regeneration of deactivated industrial catalysts.

| S-EPMC6969067 | biostudies-literature

Synthesis of Dimethyl Ether via CO2 Hydrogenation: Effect of the Drying Technique of Alumina on Properties and Performance of Alumina-Supported Copper Catalysts.

Project description:Thermal treatment during catalyst preparation is one of the important factors affecting the characteristics and performance of a catalyst. To improve the catalytic performance of an alumina-supported copper catalyst prepared by an impregnation method for dimethyl ether (DME) synthesis from CO2, the effects of the use of hot air and infrared drying as well as calcination at 600 and 900 °C to prepare alumina supports were investigated. Infrared drying could shorten the required drying time by 75% when compared with hot air drying. Infrared drying could also help maintain the pore size and pore volume of the supports, leading to their larger surface areas. Different drying techniques were additionally noted to result in different sizes and shapes of the pores as well as to different copper distributions and intensities of acid sites of the catalyst. An increase in the calcination temperature resulted in a decrease in the surface area of the supports because of particle aggregation. The drying technique exhibited a more significant effect than calcination temperature on the space-time yield of DME. A catalyst utilizing the support prepared by infrared drying and then calcined at 600 °C exhibited the highest yield of DME (40.9 gDME kgcat -1 h-1) at a reaction temperature of 300 °C. Stability of the optimal catalyst, when monitored over a 24 h period, was noted to be excellent.

| S-EPMC7017421 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data