Dataset Information

Automatic Dissolution Testing with High-Temporal Resolution for Both Immediate-Release and Fixed-Combination Drug Tablets.

ABSTRACT: Dissolution testing plays many important roles throughout the pharmaceutical industry, from the research and development of drug products to the control and evaluation of drug quality. However, it is a challenging task to perform both high-efficient separation and high-temporal detection to achieve accurate dissolution profile of each active ingredient dissolved from a drug tablet. In our study, we report a novel non-manual-operation method for performing the automatic dissolution testing of drug tablets, by combining a program-controlled sequential analysis and high-speed capillary electrophoresis for efficient separation of active ingredients. The feasibility of the method for dissolution testing of real drug tablets as well as the performance of the proposed system has been demonstrated. The accuracy of drug dissolution testing is ensured by the excellent repeatability of the sequential analysis, as well as the similarity of the evaluation of dissolution testing. Our study show that the proposed method is capable to achieve simultaneous dissolution testing of multiple ingredients, and the matrix interferences can be avoided. Therefore it is of potential valuable applications in various fields of pharmaceutical research and drug regulation.

SUBMITTER: Chi Z

PROVIDER: S-EPMC6863837 | biostudies-literature | 2019 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Automatic Dissolution Testing with High-Temporal Resolution for Both Immediate-Release and Fixed-Combination Drug Tablets.

Chi Zhongmei Z Azhar Irfan I Khan Habib H Yang Li L Feng Yunxiang Y

Scientific reports 20191119 1

Dissolution testing plays many important roles throughout the pharmaceutical industry, from the research and development of drug products to the control and evaluation of drug quality. However, it is a challenging task to perform both high-efficient separation and high-temporal detection to achieve accurate dissolution profile of each active ingredient dissolved from a drug tablet. In our study, we report a novel non-manual-operation method for performing the automatic dissolution testing of dru ...[more]

PMID: 31745201

Similar Datasets

Project description:BACKGROUND:Dissolution of artemether (ART) and lumefantrine (LUM) active pharmaceutical ingredients (APIs) in fixed dose combination (FDC) ART/LUM tablets is one of the critical quality attributes. Thus, the verification of the release profile of ART and LUM from FDC ART/LUM tablets using a robust and discriminatory dissolution method is crucial. Therefore, the aim of this study was to develop and validate an appropriate dissolution method for quality control of FDC ART/LUM tablets. METHODS:The dissolution medium was selected based on saturation solubility data and sink conditions. The effect of agitation speed, pH and surfactant concentration on the release of ART and LUM was evaluated by employing a two-level factorial experiment. The resulting final method was validated for linearity, precision, robustness and API stability. In addition, the discriminatory power of the method was evaluated using expired and unexpired FDC ART/LUM products. RESULTS:A suitable dissolution profile of FDC ART/LUM tablets was obtained in 900 ml HCl (0.025 N, pH 1.6) with 1%Myrj 52 using paddle method at 100 rpm and 37 °C. ART and LUM were analysed using a HPLC method with UV detection at wavelengths of 210 and 335 nm, respectively. The results from the stability study showed that ART and LUM were sufficiently stable in HCl (0.025 N, pH 1.6) with 1%Myrj 52 at 37 °C. The method was linear (r2 = 0.999) over the concentration range of 6.25-100 μg/ml. The results for precision were within the acceptance limit (%RSD < 2). The percent relative standard deviation (< 2%) and statistically non-significant (p > 0.05) difference in release of ART and LUM observed between deliberately changed dissolution method settings (pH = 1.6 ± 0.2 or agitation speed = 100 ± 2) and optimized dissolution conditions revealed the robustness of the dissolution method. The method was capable to discriminate among different FDC ART/LUM products with different quality. CONCLUSIONS:The developed dissolution method is robust and discriminatory. It can be used in the quality evaluation of FDC ART/LUM tablets.

Project description:PurposeThe aim of this study was to establish the suitability of terahertz (THz) transmission measurements to accurately measure and predict the critical quality attributes of disintegration time and the amount of active pharmaceutical ingredient (API) dissolved after 15, 20 and 25 min for commercial tablets processed at production scale.MethodsSamples of 18 batches of biconvex tablets from a production-scale design of experiments study into exploring the design space of a commercial tablet manufacturing process were used. The tablet production involved the process steps of high-shear wet granulation, fluid-bed drying and subsequent compaction. The 18 batches were produced using a 4 factor split plot design to study the effects of process changes on the disintegration time. Non-destructive and contactless terahertz transmission measurements of the whole tablets without prior sample preparation were performed to measure the effective refractive index and absorption coefficient of 6 tablets per batch.ResultsThe disintegration time (R 2?=?0.86) and API dissolved after 15 min (R 2?=?0.96) linearly correlates with the effective refractive index, n eff, measured at terahertz frequencies. In contrast, no such correlation could be established from conventional hardness measurements. The magnitude of n eff represents the optical density of the sample and thus it reflects both changes in tablet porosity as well as granule density. For the absorption coefficient, ? eff, we observed a better correlation with dissolution after 20 min (R 2?=?0.96) and a weaker correlation with disintegration (R 2?=?0.83) compared to n eff.ConclusionThe measurements of n eff and ? eff provide promising predictors for the disintegration and dissolution time of tablets. The high penetration power of terahertz radiation makes it possible to sample a significant volume proportion of a tablet without any prior sample preparation. Together with the short measurement time (seconds), the potential to measure content uniformity and the fact that the method requires no chemometric models this technology shows clear promise to be established as a process analyser to non-destructively predict critical quality attributes of tablets.

Project description:Purpose: The aims of this study was to investigate the mutual pharmacokinetic interactions between steady-state atorvastatin and metformin and the effect of food on the fixed-dose combined (FDC) tablet of atorvastatin and metformin extended release (XR). Subjects and methods: Study 1, an open-labeled, fixed sequence, multiple-dose pharmacokinetic drug-drug interaction study, was divided into 2 parts. Atorvastatin (40 mg) or metformin (1,000 mg) XR tablets were administered once daily via mono- or co-therapy for 7 days. Plasma levels of atorvastatin and 2-OH-atorvastatin, were quantitatively determined for 36 h in part A (n=50) while metformin plasma concentration was measured up to 24 h in part B (n=16) after the last dosing. Study 2, a randomized, open-labeled, single-dose, two-treatment, two-period, two-sequence crossover study, involved 27 healthy subjects to investigate the impact of food intake on the pharmacokinetics of a combined atorvastatin/metformin XR 20/500 mg (CJ-30056 20/500 mg) tablet. Results: After multiple doses of mono- or co-therapy of atorvastatin (40 mg) and metformin (1,000 mg) XR, the 90% confidence intervals (CIs) of the geometric mean ratios (GMRs) for the peak plasma concentration at steady state (Cmax,ss) and area under the plasma concentration-time curve during the dosing interval at steady state (AUCτ,ss) were 1.07 (0.94-1.22) and 1.05 (0.99-1.10) for atorvastatin, 1.06 (0.96-1.16) and 1.16 (1.10-1.21) for 2-OH-atorvastatin, and 1.00 (0.86-1.18) and 0.99 (0.87-1.13) for metformin, respectively. Food delayed time to reach maximum concentration (tmax), decreased atorvastatin Cmax by 32% with a GMR (90% CI) of 0.68 (0.59-0.78), and increased metformin AUCt by 56% with a GMR (90% CI) of 1.56 (1.43-1.69). Conclusion: No clinically relevant pharmacokinetic interaction was seen when atorvastatin was co-administered with metformin. Food appeared to change the absorption of atorvastatin and metformin from an FDC formulation. These alterations were in accordance with those described with the single reference drugs when ingested with food.

Project description:BackgroundIn type 2 diabetes mellitus, fixed-dose combination (FDC) can provide the complementary benefits of correction of multiple pathophysiologic defects such as dysfunctions in glycemic or metabolic control while improving compliance compared with separate tablets taken together. The objective of the study reported here was to compare the pharmacodynamic (PD), pharmacokinetic (PK), and tolerability profiles of gemigliptin and extended-release metformin (metformin XR) between FDC and separate tablets.MethodsA randomized, open-label, single-dose, two-way, two-period, crossover study was conducted in 28 healthy male volunteers. Two FDC tablets of gemigliptin/metformin 25/500 mg or separate tablets of gemigliptin (50 mg ×1) and metformin XR (500 mg ×2) were orally administered in each period. Serial blood samples were collected up to 48 hours post-dose to determine dipeptidyl peptidase 4 (DPP-4) activity using spectrophotometric assay and concentrations of gemigliptin and metformin using tandem mass spectrometry. Geometric mean ratios (GMRs) of FDC to separate tablet formulations and their 90% confidence intervals (CIs) were calculated to compare the PD and PK parameters between the two formulations. Tolerability was assessed throughout the study.ResultsThe plasma DPP-4 activity-time curves of the FDC and the separate tablets almost overlapped, leading to a GMR (90% CI) of the FDC to separate tablets for the plasma DPP-4 activity and its maximum inhibition of 1.00 (0.97-1.04) and 0.92 (0.82-1.05), respectively. Likewise, all of the GMRs (90% CIs) of FDC to separate tablets for the area under the plasma concentration-time curve and maximum plasma concentration of gemigliptin and metformin fell entirely within the conventional bioequivalence range of 0.80-1.25. Both the FDC and separate tablets were well tolerated.ConclusionThe PD, PK, and tolerability profiles of gemigliptin and metformin XR in FDC and separate tablets were found to be comparable. The FDC tablet of gemigliptin and metformin sustained release can be a convenient therapeutic option in patients with type 2 diabetes mellitus requiring a combination approach.

Dataset Information

Automatic Dissolution Testing with High-Temporal Resolution for Both Immediate-Release and Fixed-Combination Drug Tablets.

Publications

Automatic Dissolution Testing with High-Temporal Resolution for Both Immediate-Release and Fixed-Combination Drug Tablets.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets