Dataset Information

Structured carbon foam derived from waste biomass: application to endocrine disruptor adsorption.

ABSTRACT: In this paper, a novel structured carbon foam has been prepared from argan nut shell (ANS) was developed and applied in bisphenol A (BPA) removal from water. The results showed that the prepared carbon foam remove 93% of BPA (60 mg/L). The BPA equilibrium data obeyed the Liu isotherm, displaying a maximum uptake capacity of 323.0 mg/g at 20 °C. The calculated free enthalpy change (?H° = - 4.8 kJ/mol) indicated the existence of physical adsorption between BPA and carbon foam. Avrami kinetic model was able to explain the experimental results. From the regeneration tests, we conclude that the prepared carbon foam has a good potential to be used as an economic and efficient adsorbent for BPA removal from contaminated water. Based on these results and the fact that the developed structured carbon foam is very easy to separate from treated water, it can serve as an interesting material for real water treatment applications.

SUBMITTER: Zbair M

PROVIDER: S-EPMC6875152 | biostudies-literature | 2019 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Structured carbon foam derived from waste biomass: application to endocrine disruptor adsorption.

Zbair Mohamed M Ojala Satu S Khallok Hamza H Ainassaari Kaisu K El Assal Zouhair Z Hatim Zineb Z Keiski Riitta L RL Bensitel Mohamed M Brahmi Rachid R

Environmental science and pollution research international 20191019 31

In this paper, a novel structured carbon foam has been prepared from argan nut shell (ANS) was developed and applied in bisphenol A (BPA) removal from water. The results showed that the prepared carbon foam remove 93% of BPA (60 mg/L). The BPA equilibrium data obeyed the Liu isotherm, displaying a maximum uptake capacity of 323.0 mg/g at 20 °C. The calculated free enthalpy change (∆H° = - 4.8 kJ/mol) indicated the existence of physical adsorption between BPA and carbon foam. Avrami kinetic model ...[more]

PMID: 31630351

Similar Datasets

Project description:The amine-rich surfaces of pyrolyzed human solid waste (py-HSW) can be "primed" or "regenerated" with carbon dioxide (CO2) to enhance their adsorption of ammonia (NH3) for use as a soil amendment. To better understand the mechanism by which CO2 exposure facilitates NH3 adsorption to py-HSW, we artificially enriched a model sorbent, pyrolyzed, oxidized wood (py-ox wood) with amine functional groups through exposure to NH3. We then exposed these N-enriched materials to CO2 and then resorbed NH3. The high heat of CO2 adsorption (Q st) on py-HSW, 49 kJ mol-1, at low surface coverage, 0.4 mmol CO2 g-1, showed that the naturally occurring N compounds in py-HSW have a high affinity for CO2. The Q st of CO2 on py-ox wood also increased after exposure to NH3, reaching 50 kJ mol-1 at 0.7 mmol CO2 g-1, demonstrating that the incorporation of N-rich functional groups by NH3 adsorption is favorable for CO2 uptake. Adsorption kinetics of py-ox wood revealed continued, albeit diminishing NH3 uptake after each CO2 treatment, averaging 5.9 mmol NH3 g-1 for the first NH3 exposure event and 3.5 and 2.9 mmol NH3 g-1 for the second and third; the electrophilic character of CO2 serves as a Lewis acid, enhancing surface affinity for NH3 uptake. Furthermore, penetration of 15NH3 and 13CO2 measured by NanoSIMS reached over 7 μm deep into both materials, explaining the large NH3 capture. We expected similar NH3 uptake in py-HSW sorbed with CO2 and py-ox wood because both materials, py-HSW and py-ox wood sorbed with NH3, had similar N contents and similarly high CO2 uptake. Yet NH3 sorption in py-HSW was unexpectedly low, apparently from potassium (K) bicarbonate precipitation, reducing interactions between NH3 and sorbed CO2; 2-fold greater surface K in py-HSW was detected after exposure to CO2 and NH3 than before gas exposure. We show that amine-rich pyrolyzed waste materials have high CO2 affinity, which facilitates NH3 uptake. However, high ash contents as found in py-HSW hinder this mechanism.

Project description:The synthesis of magnetic iron-carbon composites (Fe/C) from waste avocado seeds via hydrothermal carbonization (HTC) has been demonstrated for the first time. These materials are shown to be effective in adsorption and catalytic applications, with performances comparable to or higher than materials produced through conventional processing routes. Avocado seeds have been processed in high-temperature water (230 °C) at elevated pressure (30 bar at room temperature) in the presence of iron nitrate and iron sulfate, in a process mimicking natural coalification. Characterization of the synthesized material has been carried out by X-ray diffraction (XRD), atomic absorption spectroscopy (AAS), X-ray fluorescence (XRF), X-ray photoelectron spectroscopy (XPS), inductively coupled plasma-optical emission spectrometry (ICP-OES), Fourier-transform infrared spectroscopy (FT-IR), magnetometry, and through surface area measurements. The supported iron particles are observed to be predominately magnetite, with an oxidized hematite surface region. The presence of iron catalyzes the formation of an extended, ordered polymeric structure in the avocado seed-derived carbon. The magnetic Fe/C has been demonstrated as an adsorbent for environmental wastewater treatment using methylene blue and indigo carmine. Kinetic analysis suggests that the adsorbates are chemisorbed, with the positive surface charge of Fe/C being preferential for indigo carmine adsorption (49 mg g-1). Additionally, Fe/C has been evaluated as a heterogeneous catalyst for the hydroalkoxylation of phenylacetylene with ethylene glycol to 2-benzyl-1,3-dioxolane. Product yields of 45% are obtained, with 100% regioselectivity to the formed isomer. The solid catalyst has the advantages of being prepared from a waste material and of easy removal after reaction via magnetic separation. These developments provide opportunities to produce carbon-based materials for a variety of high-value applications, potentially also including energy storage and biopharmaceuticals, from a wide range of lignocellulosic biomass feedstocks.

Dataset Information

Structured carbon foam derived from waste biomass: application to endocrine disruptor adsorption.

Publications

Structured carbon foam derived from waste biomass: application to endocrine disruptor adsorption.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets