Dataset Information

Simplified Batch and Fixed-Bed Design System for Efficient and Sustainable Fluoride Removal from Water Using Slow Pyrolyzed Okra Stem and Black Gram Straw Biochars.

ABSTRACT: Okra stem biochar (OSBC) and black gram straw biochar (BGSBC) were prepared by slow pyrolysis at 500 and 600 °C, respectively. OSBC and BGSBC were characterized using S BET, Fourier transform infrared, X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy, SEM-energy dispersive X-ray, and energy dispersive X-ray fluorescence. High carbon contents (dry basis) of 66.2 and 67.3% were recorded in OSBC and BGSBC, respectively. The OSBC surface area (23.52 m2/g) was higher than BGSBC (9.27 m2/g). The developed biochars successfully remediate fluoride contaminated water. Fluoride sorption experiments were accomplished at 25, 35, and 45 °C. Biochar-fluoride adsorption equilibrium data were fitted to Langmuir, Freundlich, Sips, Temkin, Koble-Corrigan, Radke and Prausnitz, Redlich-Peterson, and Toth isotherm models. The sorption dynamic data was better fitted to the pseudo-second order rate equation versus the pseudo-first order rate equation. The Langmuir sorption capacities of Q OSBC 0 = 20 mg/g and Q BGSBC 0 = 16 mg/g were obtained. Biochar fixed-bed dynamic studies were accomplished to ascertain the design parameters for developing an efficient and sustainable fluoride water treatment system. A column capacity of 6.0 mg/g for OSBC was achieved. OSBC and BGSBC satisfactorily remediated fluoride from contaminated ground water and may be considered as a sustainable solution for drinking water purification.

SUBMITTER: Kumar H

PROVIDER: S-EPMC6881843 | biostudies-literature | 2019 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Pine needle litter in Himalayan forests leads to forest fires, ground water recharge inhibition, soil acidification and contamination, and stops the growth of grass and plants. This study provides a possible solution for pine needle litter problem by converting it to biochar. Pine needle litter lying on the ground for approximately a month was collected from the Himalayan region. The pine needle litter biochars were generated using slow pyrolysis (residence time, 30 min; heating rate, 10 °C/min) at 350, 450, 550, 650, and 750 °C. Finally, pine needle litter biochar prepared at 550 °C (PNBC550) was selected for sorptive removal of aqueous lead both in batch and column studies. The PNBC550 was characterized for proximate and elemental compositions, crystallinity, surface area, morphology, and functional groups. A BET surface area of 230.9 m2/g was obtained for PNBC550. Batch sorption studies were carried out to study (1) the adsorption versus pH studies (at pH 2 to 7), (2) isotherms (at 10, 25, and 35 °C) to evaluate the temperature effect on the sorption efficiency, and (3) kinetics to reveal the effect of time, adsorbent dose, and initial concentration on the reaction rate. Increasing pyrolysis temperature raised lead sorption up to 550 °C. Lead adsorption increased considerably as pH rose from 2 to a maximum adsorption around pH 5 and above. The sorption data were fitted using different isotherm models and kinetic equations. The Langmuir adsorption capacity increased from 22.93 mg/g at 10 °C to 40.43 mg/g at 35 °C, showing that adsorption was endothermic. Fixed-bed studies were conducted at room temperature with an initial lead concentration of 7.85 mg/L and 4.0 g of PNBC550 at initial pH 5.0 and a flow rate of 3 mL/min. Desorption studies conducted under the same experimental conditions found about 90-93% lead recovery. Development of high-efficiency biochars for lead remediation provides a sustainable solution for the Himalayan pine needle litter problem. The biochars also possess the possible potential for aqueous removal of other metal cations.

Project description:The primary purpose of this study is to eliminate Basic Red 46 dye from aqueous solutions utilizing batch experiments by adsorption on biochars prepared from bamboo and rice straw biomass. Biochars prepared from bamboo (B), and rice straw (R) was pyrolyzed at 500°C (B500 and R500). Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR) Spectroscopy, X-ray Diffraction (XRD), and surface area and porosity analyzers were used to characterize the B500 and R500 samples. The characterization results indicated that the biochars possessed an amorphous porous structure with many functional groups consisting primarily of silicates. The adsorption rate of BR46 was evaluated using two kinetic models (pseudo-first-order and pseudo-second-order), and the results indicated that the pseudo-second-order model fitted to the experimental data well (R2>0.99). Nearly 24 h was sufficient to achieve equilibrium with the dye adsorption for the two biochars. R500 had a greater adsorption efficiency than B500. As pH levels increased, the dye's adsorption capability increased as well. The Langmuir and Freundlich isotherm models were used to investigate the equilibrium behavior of BR46 adsorption, and the equilibrium data fitted well with the Langmuir model (R2>0.99) compared to the Freundlich model (R2>0.89). The maximum adsorption capacities of BR46 are 9.06 mg/g for B500 and 22.12 mg/g for R500, respectively. Additionally, adsorption capacity increased as temperature increased, indicating that adsorption is favored at higher temperatures. The electrostatic interaction is shown to be the dominant mechanism of BR46 adsorption, and BR46 acts as an electron-acceptor, contributing to n-π EDA (Electron Donor-Acceptor) interaction. Thermodynamic parameters for the dye-adsorbent system revealed that the adsorption process is spontaneous and feasible. The values of the adsorption coefficient (Kd) were on the order of 102-103. Kd of R500 was greater than that of B500, indicating that R500 had a greater adsorption capacity. The results showed that R500 could be used as a low-cost alternative adsorbent for removing BR46 from effluents.

Project description:The efficient removal of toxic metals ions from chemical industry wastewater is considered problematic due to the existence of pollutants as mixtures in the aqueous matrix, thus development of advanced and effective treatment method has been identified as a panacea to the lingering problems of heavy metal pollution. In this study, KIAgNPs decorated MWCNTs nano adsorbent was developed using combination of green chemistry protocol and chemical vapor deposition techniques and subsequently characterized using UV-Vis, HRTEM, HRSEM, XRD, FTIR and XPS. The adsorptive efficiency of MWCNTs-KIAgNPs for the removal of Cr(VI), Ni(II), Fe(II), Cd(II) and physico-chemical parameters like pH, TDS, COD, BOD, nitrates, sulphates, chlorides and phosphates from chemical industrial wastewater was examined in both batch and fixed bed systems. The result exhibited successful deposition of KIAgNPs on the surface of MWCNTs as confirmed by the microstructures, morphology, crystalline nature, functional groups and elemental characteristics of the MWCNTs-KIAgNPs. Optimum batch adsorption parameters include; pH (3 for Cr(VI) and 6 for Ni(II), Fe(II) and Cd(II) ions), contact time (60 min), adsorbent dosage (40 mg) and temperature (318 K). The binding capacities were obtained as follows; Cr6+ (229.540 mg/g), Ni2+ (174.784 mg/g), Fe2+ (149.552) and Cd2+ (121.026 mg/g), respectively. Langmuir isotherm and pseudo-second order kinetic model best described the experimental data in batch adsorption, while the thermodynamic parameters validated the chemisorption and endothermic nature of the adsorption process. In continuous adsorption, the metal ions were effectively removed at low metal influent concentration, low flow rate and high bed depth, whereby the experimental data were designated by Thomas model. The high physico-chemical parameters in the wastewater were successfully treated in both batch and fixed bed systems to fall within WHO permissible concentrations. The adsorption/desorption study illustrated over 80% metal removal by MWCNTs-KIAgNPs even after 8th adsorption cycle. This study demonstrated excellent performance of MWCNTs-KIAgNPs for chemical industry wastewater treatment.

Dataset Information

Simplified Batch and Fixed-Bed Design System for Efficient and Sustainable Fluoride Removal from Water Using Slow Pyrolyzed Okra Stem and Black Gram Straw Biochars.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets