Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Preparation of anthracene-based tetraperimidine hexafluorophosphate and selective recognition of chromium(III) ions.

ABSTRACT: A novel anthracene-based tetraperimidine hexafluorophosphate 3 was prepared, and its structure was determined through X-ray analysis, HRMS as well as 1H and 13C NMR spectroscopy. In the cationic moiety of 3, two (N-ethylperimidinyl-C2H4)2NCH2- arms were attached to the 9- and 10-positions of anthracene. In addition, compound 3 was used as a chemosensor to research the ability to recognize Cr3+ through fluorescence and UV titrations, HRMS, as well as 1H NMR and IR spectroscopy. The results indicate that 3 is an effective chemosensor for Cr3+.

SUBMITTER: Liu QX

PROVIDER: S-EPMC6902876 | biostudies-literature | 2019

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Preparation of anthracene-based tetraperimidine hexafluorophosphate and selective recognition of chromium(III) ions.

Liu Qing-Xiang QX Yang Feng F Zhao Zhi-Xiang ZX Yu Shao-Cong SC Ding Yue Y

Beilstein journal of organic chemistry 20191125

A novel anthracene-based tetraperimidine hexafluorophosphate 3 was prepared, and its structure was determined through X-ray analysis, HRMS as well as 1H and 13C NMR spectroscopy. In the cationic moiety of 3, two (N-ethylperimidinyl-C2H4)2NCH2- arms were attached to the 9- and 10-positions of anthracene. In addition, compound 3 was used as a chemosensor to research the ability to recognize Cr3+</sup ...[more]

PMID: 31839830

Similar Datasets

An anthracene based fluorescent probe for the selective and sensitive detection of Chromium (III) ions in an aqueous medium and its practical application.

Project description:An anthracene based fluorescent probe, integrated with thiophene moiety, exhibited selective and sensitive detection of chromium (III) ions over other metal ions. Its synthesis was achieved by simple mixing of two commercially available compounds, 2-aminoanthracene, and 2-thiophenecarboxaldehyde, in onestep without the needed complex purification process. The probe molecule ( ANT-Th ) offered exceptional features such as "turn-on" fluorescence response, low detection limit (0.4 μM), and fast response time (<1 min) via C=N bond hydrolysis. Also, a simple test paper system was developed for the rapid detection of chromium (III) ions with the naked eye.

| S-EPMC7751903 | biostudies-literature

Anthracene coupled adenine for the selective sensing of copper ions.

Project description:Anthracene-based adenines 1 and 2 have been designed and synthesized, and their metal ion recognition properties have been established fluorometrically. Both molecules exhibit Cu²? induced ON-OFF type signaling patterns over the other representative metal ions studied. Compound 1 exhibits 97% quenching of emission in the presence of Cu²? whilst derivative 2 shows 81% quenching under similar experimental conditions.

| S-EPMC2887277 | biostudies-literature

Preparation of Silk Sericin/Lignin Blend Beads for the Removal of Hexavalent Chromium Ions.

Project description:In the present study, novel adsorbents having high adsorption capability and reusability were prepared using agricultural by-products: silk sericin and lignin. Silk sericin and lignin blend beads were successfully prepared using simple coagulation methods for the removal of hexavalent chromium (Cr(VI)) from aqueous solution. A 1 M lithium chloride (LiCl)/dimethyl sulfoxide (DMSO) solvent system successfully dissolved both sericin and lignin and had sufficient viscosity for bead preparation. Compared to the conventional sericin bead adsorbent, sericin/lignin blend beads showed higher Cr(VI) adsorption capacity. The amount of lignin added to the adsorbent greatly affected the adsorption capacity of the beads, and a 50:50 sericin/lignin blend ratio was optimal. Adsorption behavior followed the Freundlich isotherm, which means the adsorption of Cr(VI) occurred on the heterogeneous surface. Cr(VI) adsorption capability increased with temperature because of thermodynamic-kinetic effects. In addition, over 90% of Cr(VI) ions were recovered from the Cr(VI) adsorbed sericin/lignin beads in a 1 M NaOH solution. The adsorption-desorption recycling process was stable for more than seven cycles, and the recycling efficiency was 82%. It is expected that the sericin/lignin beads could be successfully applied in wastewater remediation especially for hazardous Cr(VI) ions in industrial wastewater.

| S-EPMC5037744 | biostudies-literature

Preparation of Furfural From Xylose Catalyzed by Diimidazole Hexafluorophosphate in Microwave.

Project description:In this work, functionalized alkyl imidazolium hexafluorophosphate ILs were synthesized and characterized; then, they were applied in the conversion of xylose to furfural under the microwave method. The results showed that when CnMF was used as a catalyst, an acidic environment was provided to promote the formation of furfural. In addition, the heating method, the solvent, and the different structures of cations in the ionic liquid influenced their catalytic activity. In an aqueous solution, the yield of furfural obtained using the microwave method was better than that of the conventional heating method, and the catalytic activity of diimidazole hexafluorophosphate was better than that of monoimidazole. Meanwhile, for the diimidazole hexafluorophosphate, the change of the carbon chain length between the imidazole rings also slightly influenced the yield. Finally, the optimal yield of 49.76% was obtained at 205°C for 8 min using 3,3'-methylenebis(1-methyl-1H-imidazol-3-ium), C1MF, as a catalyst. Mechanistic studies suggested that the catalytic activity of C1MF was mainly due to the combined effect of POFn (OH)3-n and imidazole ring. Without a doubt, the catalytic activity of C1MF was still available after five cycles, which not only showed its excellent catalytic activity in catalyzing the xylose to prepare the biomass platform compound furfural but also could promote the application of functionalized ionic liquids.

| S-EPMC8440960 | biostudies-literature

Selective adsorption and determination of hexavalent chromium ions using graphene oxide modified with amino silanes.

Project description:Novel adsorbents are described for the preconcentration of chromium(VI). Graphene oxide (GO) was modified with various amino silanes containing one, two, or three nitrogen atoms in the molecule. These include 3-aminopropyltriethoxysilane (APTES), N-(3-trimethoxysilylpropyl)ethylenediamine (TMSPEDA), and N1-(3-trimethoxysilylpropyl)diethylenetriamine (TMSPDETA). The resulting GO derivatives were characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, and energy-dispersive X-ray fluorescence spectrometry (EDXRF). Adsorption studies show that these GO based sorbents are highly selective for Cr(VI) in the presence of Cr(III) at pH 3.5. Although the amino silanes applied in modification of GO contain different numbers of nitrogen atoms, the maximum adsorption capacities of GO derivatives are very similar (13.3-15.1 mg·g-1). Such results are in accordance with spectroscopy studies which show that the amount of amino silanes attached to GO decreases in the order of APTES > TMSPEDA > TMSPDETA. The APTES-modified GO was applied to selective and sensitive extraction of Cr(VI) ions prior to quantitation by low-power EDXRF using the Cr Kα line. The Cr(VI) ions need not be eluted from the solid adsorbent. The method has a 0.17 ng·mL-1 detection limit, and the recovery is 99.7 ± 2.2% at a spiking level of 10 ng·mL-1. The method was successfully applied to the determination of Cr(VI) in water samples. Graphical abstractGraphene oxide adsorbents modified with various amino silanes are described for the preconcentration and speciation of trace and ultratrace levels of chromium ions.

| S-EPMC5770511 | biostudies-literature

Occurrence and speciation of polymeric chromium(III), monomeric chromium(III) and chromium(VI) in environmental samples.

Project description:Laboratory experiments suggest that polymeric Cr(III) could exist in aqueous solution for a relative long period of time. However, the occurrence of polymeric Cr(III) has not been reported in environmental media due partially to the lack of method for speciating polymeric Cr. We observed an unknown Cr species during the course of study on speciation of Cr in the leachates of chromated-copper-arsenate (CCA)-treated wood. Efforts were made to identify structure of the unknown Cr species. Considering the forms of Cr existed in the CCA-treated woods, we mainly focused our efforts to determine if the unknown species were polymeric Cr(III), complex of Cr/As or complex of Cr with dissolved organic matter (DOM). In order to evaluate whether polymeric Cr(III) largely exist in wood leachates, high performance liquid chromatography coupled with inductively coupled mass spectrometry (HPLC-ICPMS was used) for simultaneous speciation of monomeric Cr(III), polymeric Cr(III), and Cr(VI). In addition to wood leachates where polymeric Cr (III) ranged from 39.1 to 67.4%, occurrence of the unknown Cr species in other environmental matrices, including surface waters, tap and waste waters, was also investigated. It was found that polymeric Cr(III) could exist in environmental samples containing μg/L level of Cr, at a level up to 60% of total Cr, suggesting that polymeric Cr(III) could significantly exist in natural environments. Failure in quantifying polymeric Cr(III) would lead to the underestimation of total Cr and bias in Cr speciation. The environmental implication of the presence of polymeric Cr(III) species in the environment deserves further study.

| S-EPMC5027193 | biostudies-literature

Preparation of solvent-free starch-based carbon dots for the selective detection of Ru3+ ions.

Project description:A simple, green, and solvent-free pyrolysis method for the preparation of starch-based carbon dots (CDs) was developed. The CDs prepared at 300 °C exhibited a highest quantum yield of 21.0%, which was mainly due to the high degree of graphitisation of the CDs. The CDs were selective for the detection of Ru3+ ion solutions.

| S-EPMC9237645 | biostudies-literature

Selective Sugar Recognition by Anthracene-Type Boronic Acid Fluorophore/Cyclodextrin Supramolecular Complex Under Physiological pH Condition.

Project description:We synthesized novel PET (photoinduced electron transfer)-type fluorescence glucose probe 1 [(4-(anthracen-2-yl-carbamoyl)-3-fluorophenyl)boronic acid], which has a phenylboronic acid (PBA) moiety as the recognition site and anthracene as the fluorescent part. Although the PBA derivatives dissociate and bind with sugar in the basic condition, our new fluorescent probe can recognize sugars in the physiological pH by introducing an electron-withdrawing fluorine group into the PBA moiety. As a result, the pK a value of this fluorescent probe was lowered and the probe was able to recognize sugars at the physiological pH of 7.4. The sensor was found to produce two types of fluorescent signals, monomer fluorescence and dimer fluorescence, by forming a supramolecular 2:1 complex of 1 with glucose inside a ?-cyclodextrin (?-CyD) cavity. Selective ratiometric sensing of glucose by the 1/?-CyD complex was achieved in water at physiological pH.

| S-EPMC6890849 | biostudies-literature

Multicolor Emissive Phosphorescent Iridium(III) Complexes Containing L-Alanine Ligands: Photophysical and Electrochemical Properties, DFT Calculations, and Selective Recognition of Cu(II) Ions.

Project description:Three novel Ir(III) complexes, (ppy)2Ir(L-alanine) (Ir1) (ppy = 2-phenylpyridine), (F4ppy)2Ir(L-alanine) (Ir2) (F4ppy = 2-(4-fluorophenyl)pyridine), and (F2,4,5ppy)2Ir(L-alanine) (Ir3) (F2,4,5ppy = 2-(2,4,5-trifluorophenyl)pyridine), based on simple L-alanine as ancillary ligands were synthesized and investigated. Due to the introduction of fluorine substituents on the cyclometalated ligands, complexes Ir1-Ir3 exhibited yellow to sky-blue emissions (λem = 464-509 nm) in acetonitrile solution. The photoluminescence quantum yields (PLQYs) of Ir1-Ir3 ranged from 0.48-0.69, of which Ir3 with sky-blue luminescence had the highest PLQY of 0.69. The electrochemical study and density functional theory (DFT) calculations show that the highest occupied molecular orbital (HOMOs) energy of Ir1-Ir3 are stabilized by the introduction of fluorine substituents on the cyclometalated ligands, while L-alanine ancillary ligand has little contribution to HOMOs and lowest unoccupied molecular orbitals (LUMOs). Moreover, Ir1-Ir3 presented an excellent response to Cu2+ with a high selectivity, strong anti-interference ability, and short response time. Such a detection was based on significant phosphorescence quenching of their emissions, showing the potential application in chemosensors for Cu2+.

| S-EPMC9741083 | biostudies-literature

Anthracene-Based Amido-Amine Cage Receptor for Anion Recognition under Neutral Aqueous Conditions.

Project description:A new amido-amine cage receptor, which combines 1,8-anthracene diacarboxamide subunit and a polyammonium azamacrocycle, is reported. Bearing both the hydrogen bond donor and the acceptor binding sites, the receptor is able to bind phosphate selectively under neutral (pH 7.2) aqueous conditions. The recognition events for phosphate and dicarboxylates are accomplished by a fluorescence enhancement in the anthracene emission. As revealed by experimental and theoretical studies, phosphate and oxalate show different recognition modes. Phosphate demonstrates hydrogen bond acceptor properties, while the coordination of oxalate favours the protonation of the receptor.

| S-EPMC6996565 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data