Browse
Submit Data
Databases
API
Help

Dataset Information

27 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

An anthracene based fluorescent probe for the selective and sensitive detection of Chromium (III) ions in an aqueous medium and its practical application.

ABSTRACT: An anthracene based fluorescent probe, integrated with thiophene moiety, exhibited selective and sensitive detection of chromium (III) ions over other metal ions. Its synthesis was achieved by simple mixing of two commercially available compounds, 2-aminoanthracene, and 2-thiophenecarboxaldehyde, in onestep without the needed complex purification process. The probe molecule ( ANT-Th ) offered exceptional features such as "turn-on" fluorescence response, low detection limit (0.4 ?M), and fast response time (<1 min) via C=N bond hydrolysis. Also, a simple test paper system was developed for the rapid detection of chromium (III) ions with the naked eye.

SUBMITTER: KarakuS E

PROVIDER: S-EPMC7751903 | biostudies-literature | 2020

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

An anthracene based fluorescent probe for the selective and sensitive detection of Chromium (III) ions in an aqueous medium and its practical application.

KarakuŞ Erman E

Turkish journal of chemistry 20200818 4

An anthracene based fluorescent probe, integrated with thiophene moiety, exhibited selective and sensitive detection of chromium (III) ions over other metal ions. Its synthesis was achieved by simple mixing of two commercially available compounds, 2-aminoanthracene, and 2-thiophenecarboxaldehyde, in onestep without the needed complex purification process. The probe molecule ( ANT-Th ) offered exceptional features such as "turn-on" fluorescence response, low detection limit (0.4 μM), and f ...[more]

PMID: 33488204

Similar Datasets

Preparation of anthracene-based tetraperimidine hexafluorophosphate and selective recognition of chromium(III) ions.

Project description:A novel anthracene-based tetraperimidine hexafluorophosphate 3 was prepared, and its structure was determined through X-ray analysis, HRMS as well as 1H and 13C NMR spectroscopy. In the cationic moiety of 3, two (N-ethylperimidinyl-C2H4)2NCH2- arms were attached to the 9- and 10-positions of anthracene. In addition, compound 3 was used as a chemosensor to research the ability to recognize Cr3+ through fluorescence and UV titrations, HRMS, as well as 1H NMR and IR spectroscopy. The results indicate that 3 is an effective chemosensor for Cr3+.

| S-EPMC6902876 | biostudies-literature

A label-free fluorescent peptide probe for sensitive and selective determination of copper and sulfide ions in aqueous systems.

Project description:A label free fluorescent peptide probe (HDSGWEVHH) was used for Cu2+ and S2- determination in aqueous solution. Our results demonstrated that HDSGWEVHH is highly selective and sensitive for monitoring free Cu2+ concentration via quenching of the probe fluorescence upon Cu2+ binding. The mechanism of the complexation is investigated with Cyclic Voltammetry (CV), 1H nuclear magnetic resonance (NMR), electron paramagnetic resonance (EPR) spectroscopy and computational techniques. Theoretical calculation results indicated the binding ratio of the probe to Cu2+ is 2 : 1 and the binding constant was obtained as 1.72 × 10 8 M-1. Cu2+ concentration can be detected with the detection limit of 16 nM. Free Cu2+ concentration released from the metallothionein-Cu complex at different pH values was detected. Cu2+ concentration in real water and tea samples was also detected, and the results were consistent with the ones monitored by atomic absorption spectrometer. Because of the exceedingly small K sp value of CuS (1.27 × 10-36), S2- can sequester Cu2+ from HDSGWEVHH to restore the tryptophan (W) fluorescence. Thus the HDSGWEVHH-Cu2+ complex can also be used for S2- detection. The S2- concentrations can be monitored with a detection limit of 19 nM. The assay is also amenable to measurement of S2- concentration in pure water samples. Thus the probe designed herein is sensitive, label free, low cost, and environmentally friendly for Cu2+ and S2- determination in aqueous solutions.

| S-EPMC8694936 | biostudies-literature

Highly Sensitive Ratiometric Chemosensor and Biomarker for Cyanide Ions in the Aqueous Medium.

Project description:A newly designed cyanide-selective chemosensor based on chromone containing benzothiazole groups [3-(2,3-dihydro-benzothiazol-2-yl)-chromen-4-one (DBTC)] was synthesized and structurally characterized by physico-chemical, spectroscopic, and single-crystal X-ray diffraction analyses. The compound DBTC can detect cyanide anions based on nucleophilic addition as low as 5.76 nM in dimethyl sulfoxide-N-(2-hydroxyethyl)piperazine-N'-ethanesulfonic acid buffer (20 mM, pH 7.4) (v/v = 1:3). The binding mode between receptor DBTC and cyanide nucleophile has also been demonstrated by experimental studies using various spectroscopic tools and theoretical studies, and the experimental work has also been verified by characterizing one supporting compound of similar probable structure of the final product formed between DBTC and cyanide ion (DBTC-CN compound) by single-crystal X-ray analysis for detailed structural analyses. In theoretical study, density functional theory procedures have been used to calculate the molecular structure and the calculation of the Fukui function for evaluation of the electrophilic properties of each individual acceptor atom. Furthermore, the efficacy of the probe (DBTC) to detect the distribution of CN- ions in living cells has been checked by acquiring the fluorescence image using a confocal microscope. Notably, the paper strips with DBTC were prepared, and these could serve as efficient and suitable CN- test kits successfully.

| S-EPMC6130900 | biostudies-literature

Synthesis of practical red fluorescent probe for cytoplasmic calcium ions with greatly improved cell-membrane permeability.

Project description:In this data article, we described the detailed synthetic procedure and the experimental data for the synthesis of a red-fluorescent probe for calcium ions (Ca2+) with improved water solubility. This Ca2+ red-fluorescent probe CaTM-3 AM could be applied to fluorescence imaging of physiological Ca2+ concentration changes in not only live cells, but also brain slices, with high cell-membrane permeability leading to bright fluorescence in biosamples. The data provided herein are in association with the research article "The Development of Practical Red Fluorescent Probe for Cytoplasmic Calcium Ions with Greatly Improved Cell-membrane Permeability" in Cell Calcium (Hirabayashi et al., 2016) [1].

| S-EPMC5412011 | biostudies-literature

Near-Infrared Fluorescent Probe for Sensitive Detection of Pb(II) Ions in Living Cells.

Project description:A new near-infrared fluorescent probe (NIR-PbP) for sensitive detection of Pb(II) ions in solution and living cells has been rationally designed and synthesized. The NIR-PbP is inherently non-fluorescent and gains fluorescence in the presence Pb(II) ions. The ion detection is based on Pb(II)-induced unmasking the fluorophore through the opening of the spyrocycle, with more than 500-fold fluorescence for sub-micromolar Pb(II) concentration. The NIR-PbP has high sensitivity, good photo-stability, low detection limit, and reversible response to Pb(II) ions.

| S-EPMC6162053 | biostudies-literature

A novel fluorescent off-on probe for the sensitive and selective detection of fluoride ions.

Project description:A highly sensitive and selective fluorescent probe for fluoride ions has been developed by incorporating the dimethylphosphinothionyl group as a recognition moiety into the fluorophore of coumarin. The detection mechanism is based on the fluoride ion-triggered cleavage of the dimethylphosphinothionyl group, followed by the release of coumarin, which leads to a large fluorescence enhancement at 455 nm (λ ex = 385 nm). Under the optimized conditions, the fluorescence enhancement of the probe is directly proportional to the concentration of fluoride ions in the range of 0-30 μM with a detection limit of 0.29 μM, which is much lower than the maximum content of fluoride ions guided by WHO. Notably, satisfying results have been obtained by utilizing the probe to determine fluoride ions in real-water samples and commercially available toothpaste samples. The proposed probe is rather simple and may be useful in the detection of fluoride ions in more real samples.

| S-EPMC9073186 | biostudies-literature

Selective Detection of Pyrophosphate Anions in Aqueous Medium Using Aggregation of Perylene Diimide as a Fluorescent Probe.

Project description:A water-soluble perylene diimide, aspartic acid-functionalized perylene diimide (APDI), has shown significant sequential "turn-off" and "turn-on" responses toward Cu2+ and inorganic pyrophosphate (PPi), respectively. APDI was found to show selectivity toward Cu2+ and inorganic PPi over adenosine monophosphate, adenosine diphosphate, and adenosine triphosphate. The detection has been studied by absorption and emission spectroscopy techniques. Incorporation of Cu2+ into the solution of APDI results in a distinct quenching of the fluorescence intensity, while there was no spectral change in the presence of other metal ions. The formed APDI-Cu2+ ensemble can turn on its fluorescence signal when PPi is present. The detection of PPi could be traced by looking at the change in color of the solution under the naked eye. No interference was observed from other anions, making the APDI-Cu2+aggregate a highly selective biosensor for PPi.

| S-EPMC6777299 | biostudies-literature

Biosorption of hexavalent chromium from aqueous medium with Opuntia biomass.

Project description:The biosorption of hexavalent chromium from aqueous solutions by Opuntia cladodes and ectodermis from cactus fruits was investigated. Both types of biomass are considered low-cost, natural, and ecofriendly biosorbents. Batch experiments were carried out to determine Cr(VI) biosorption capacity and the efficiency of the biosorption process under different pH, initial Cr(VI) concentration, and sorbent dosage. The biosorption of Cr(VI) by Opuntia biomass was highly pH dependent, favoring higher metal uptake at low pH. The higher biosorption capacity was exhibited at pH 2. The optimal conditions were obtained at a sorbent dosage of 1 g L(-1) and initial metal concentration of 10 mg L(-1). Biosorption kinetic data were properly fitted with the pseudo-second-order kinetic model. The rate constant, the initial biosorption rate, and the equilibrium biosorption capacity were determined. The experimental equilibrium data obtained were analyzed using two-parameter isotherm models (Langmuir, Freundlich, and Temkin). The Langmuir maximum monolayer biosorption capacity (q max) was 18.5 mg g(-1) for cladodes and 16.4 mg g(-1) for ectodermis. The results suggest that Opuntia biomass could be considered a promising low-cost biosorbent for the ecofriendly removal of Cr(VI) from aqueous systems.

| S-EPMC3997152 | biostudies-other

A sensitive OFF-ON-OFF fluorescent probe for the cascade sensing of Al3+ and F- ions in aqueous media and living cells.

Project description:A simple Schiff-base ligand 2-hydroxy-1-naphthaldehyde semicarbazone (HNS) was synthesized and characterized. Based on the combined effect of inhibition of CH[double bond, length as m-dash]N isomerization and chelation-enhanced fluorescence (CHEF), HNS functions as a fluorescence "turn on" sensor for Al3+ in buffered aqueous media. Based on the strong affinity of Al3+ to F- ions, the in situ generated Al3+-HNS complex can also be utilized as an effective chemosensor for F- sensing by metal displacement approach, ensuing quenching of fluorescence by the reversible return of HNS from Al3+-HNS complex. Thus a method using a single probe for the detection of both Al3+ and F- ions is developed. The system exhibits high selectivity and sensitivity for Al3+ and F- ions and the detection limits were found to be as low as 6.75 × 10-8 M and 7.89 × 10-7 M, respectively. Furthermore, the practical applicability of this probe has been examined in living cells.

| S-EPMC9054392 | biostudies-literature

Highly Sensitive Detection of Iron Ions in Aqueous Solutions Using Fluorescent Chitosan Nanoparticles Functionalized by Rhodamine B.

Project description:Detection of iron ions in aqueous solutions is of significant importance because of their important role in the environment and the human body. Herein, a fluorescent rhodamine B-functionalized chitosan nanoparticles probe is reported for the efficient detection of iron ions. The chitosan nanospheres-rhodamine B (CREN) was prepared by grafting rhodamine B onto the surface of chitosan nanospheres through an amidation reaction. The as-prepared CREN fluorescent probes exhibit high fluorescence intensity under ultraviolet light. When iron ions are added to the CREN solution, they can be coordinated with weak-field ligands such as N and O on the surface of chitosan nanoparticles (CSNP) by a high-spin method. The self-assembly of Fe3+ on the surface of the CREN led to the generation of single electrons and the presence of high paramagnetism, resulting in fluorescence quenching. The quenching effect of Fe3+ on the CREN fluorescent probe can achieve the efficient detection of Fe3+, and the detection limit reaches 10-5 mol/mL. Moreover, this fluorescence quenching effect of Fe3+ on the CREN fluorescent probe is specific, which could not be disturbed by other metal ions and counteranions.

| S-EPMC8851898 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data