Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Selective Electrochemical Reduction of Nitrogen to Ammonia by Adjusting the Three-Phase Interface.

ABSTRACT: The electrochemical nitrogen reduction reaction (NRR) provides a sustainable and alternative avenue to the Haber-Bosch process for ammonia (NH3) synthesis. Despite the great efforts made on catalysts and electrolytes, unfortunately, current NRR suffers from low selectivity due to the overwhelming competition with the hydrogen evolution reaction (HER). Here, we present an adjusted three-phase interface to enhance nitrogen (N2) coverage on a catalyst surface and achieve a record-high Faradic efficiency (FE) up to 97% in aqueous solution. The almost entirely suppressed HER process combined with the enhanced NRR activity, benefiting from the efficient three-interface contact line, is responsible for the excellent selectivity toward NH3, as evidenced by the theoretical and experimental results. Our strategy also demonstrates the applicability to other catalysts that feature strong H adsorption ability, to boost the FE for NH3 synthesis above 90% and to improve the NRR activity by engineering the catalysts.

SUBMITTER: Wang H

PROVIDER: S-EPMC6944493 | biostudies-literature | 2019

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Three-Phase Electrolysis by Gold Nanoparticle on Hydrophobic Interface for Enhanced Electrochemical Nitrogen Reduction Reaction.

Project description:Electrochemical nitrogen reduction reaction (NRR) provides a facile and sustainable strategy to produce ammonia (NH3) at ambient conditions. However, the low NH3 yield and Faradaic efficiency (FE) are still the main challenges due to the competitive hydrogen evolution reaction (HER). Herein, a three-phase electrocatalyst through in situ fabrication of Au nanoparticles (NPs) located on hydrophobic carbon fiber paper (Au/o-CFP) is designed. The hydrophobic CFP surface facilitates efficient three-phase contact points (TPCPs) for N2 (gas), electrolyte (liquid), and Au NPs (solid). Thus, concentrated N2 molecules can contact the electrocatalyst surface directly, inhibiting the HER since the lowered proton concentration and overall enhancing NRR. The three-phase Au/o-CFP electrocatalyst presents an excellent NRR performance with high NH3 yield rate of 40.6 µg h-1 mg-1 at -0.30 V and great FE of 31.3% at -0.10 V versus RHE (0.1 m Na2SO4). The N2-bubble contact angle result and cyclic voltammetry analysis confirm that the hydrophobic interface has a relatively strong interaction with N2 bubble for enhanced NRR and weak electrocatalytic activity for HER. Significantly, the three-phase Au/o-CFP exhibits excellent stability with a negligible fluctuation of NH3 yield and FE in seven-cycle test. This work provides a new strategy for improving NRR and simultaneously inhibiting HER.

| S-EPMC7675187 | biostudies-literature

Boosting selective nitrogen reduction to ammonia on electron-deficient copper nanoparticles.

Project description:Production of ammonia is currently realized by the Haber-Bosch process, while electrochemical N2 fixation under ambient conditions is recognized as a promising green substitution in the near future. A lack of efficient electrocatalysts remains the primary hurdle for the initiation of potential electrocatalytic synthesis of ammonia. For cheaper metals, such as copper, limited progress has been made to date. In this work, we boost the N2 reduction reaction catalytic activity of Cu nanoparticles, which originally exhibited negligible N2 reduction reaction activity, via a local electron depletion effect. The electron-deficient Cu nanoparticles are brought in a Schottky rectifying contact with a polyimide support which retards the hydrogen evolution reaction process in basic electrolytes and facilitates the electrochemical N2 reduction reaction process under ambient aqueous conditions. This strategy of inducing electron deficiency provides new insight into the rational design of inexpensive N2 reduction reaction catalysts with high selectivity and activity.

| S-EPMC6763479 | biostudies-literature

Facts or Artifacts: Pitfalls in Quantifying Sub-ppm Levels of Ammonia Produced from Electrochemical Nitrogen Reduction.

Project description:Synthesis of ammonia through electrochemical nitrogen reduction (ENR) is emerging as one of the attractive research areas in recent years, notwithstanding the enormous challenges it faces in quantification of ammonia at very low concentrations. Several reports claiming high production rate are unwittingly compromised by the accuracy of analyzing a very low concentration (<1 ppm) of ammonia in the electrolyte post-ENR reaction using the indophenol method. Therefore, in this work, we have highlighted the significance of selecting and standardizing a right protocol encompassing admissible levels of oxidants and a complexing agent, citrate (to mitigate the effect of interfering metal ions), through elaborate control experiments. In addition, the importance of setting the lowest limit of ammonia concentration that can be accurately quantified by the indophenol method is also justified. Further, the experimental observations were summarized into a protocol, which was followed to re-evaluate the performance of two well-claimed electrocatalysts for ENR reported recently in the literature.

| S-EPMC8771696 | biostudies-literature

Folic Acid Self-Assembly Enabling Manganese Single-Atom Electrocatalyst for Selective Nitrogen Reduction to Ammonia.

Project description:Efficient and robust single-atom catalysts (SACs) based on cheap and earth-abundant elements are highly desirable for electrochemical reduction of nitrogen to ammonia (NRR) under ambient conditions. Herein, for the first time, a Mn-N-C SAC consisting of isolated manganese atomic sites on ultrathin carbon nanosheets is developed via a template-free folic acid self-assembly strategy. The spontaneous molecular partial dissociation enables a facile fabrication process without being plagued by metal atom aggregation. Thanks to well-exposed atomic Mn active sites anchored on two-dimensional conductive carbon matrix, the catalyst exhibits excellent activity for NRR with high activity and selectivity, achieving a high Faradaic efficiency of 32.02% for ammonia synthesis at - 0.45 V versus reversible hydrogen electrode. Density functional theory calculations unveil the crucial role of atomic Mn sites in promoting N2 adsorption, activation and selective reduction to NH3 by the distal mechanism. This work provides a simple synthesis process for Mn-N-C SAC and a good platform for understanding the structure-activity relationship of atomic Mn sites.

| S-EPMC8113419 | biostudies-literature

Electrochemical N2 Reduction to Ammonia Using Single Au/Fe Atoms Supported on Nitrogen-Doped Porous Carbon.

Project description:The electrochemical nitrogen reduction reaction (NRR) to ammonia (NH3) is a promising alternative route for an NH3 synthesis at ambient conditions to the conventional high temperature and pressure Haber-Bosch process without the need for hydrogen gas. Single metal ions or atoms are attractive candidates for the catalytic activation of non-reactive nitrogen (N2), and for future targeted improvement of NRR catalysts, it is of utmost importance to get detailed insights into structure-performance relationships and mechanisms of N2 activation in such structures. Here, we report density functional theory studies on the NRR catalyzed by single Au and Fe atoms supported in graphitic C2N materials. Our results show that the metal atoms present in the structure of C2N are the reactive sites, which catalyze the aforesaid reaction by strong adsorption and activation of N2. We further demonstrate that a lower onset electrode potential is required for Fe-C2N than for Au-C2N. Thus, Fe-C2N is theoretically predicted to be a potentially better NRR catalyst at ambient conditions than Au-C2N owing to the larger adsorption energy of N2 molecules. Furthermore, we have experimentally shown that single sites of Au and Fe supported on nitrogen-doped porous carbon are indeed active NRR catalysts. However, in contrast to our theoretical results, the Au-based catalyst performed slightly better with a Faradaic efficiency (FE) of 10.1% than the Fe-based catalyst with an FE of 8.4% at -0.2 V vs. RHE. The DFT calculations suggest that this difference is due to the competitive hydrogen evolution reaction and higher desorption energy of ammonia.

| S-EPMC7592340 | biostudies-literature

Activation of MoS2 monolayer electrocatalysts via reduction and phase control in molten sodium for selective hydrogenation of nitrogen to ammonia.

Project description:Electrochemical nitrogen fixation under ambient conditions is promising for sustainable ammonia production but is hampered by high reaction barrier and strong competition from hydrogen evolution, leading to low specificity and faradaic efficiency with existing catalysts. Here we describe the activation of MoS2 in molten sodium that leads to simultaneous formation of a sulfur vacancy-rich heterostructured 1T/2H-MoS x monolayer via reduction and phase transformation. The resultant catalyst exhibits intrinsic activities for electrocatalytic N2-to-NH3 conversion, delivering a faradaic efficiency of 20.5% and an average NH3 rate of 93.2 μg h-1 mgcat -1. The interfacial heterojunctions with sulfur vacancies function synergistically to increase electron localization for locking up nitrogen and suppressing proton recombination. The 1T phase facilitates H-OH dissociation, with S serving as H-shuttling sites and to stabilize . The subsequently couple with nearby N2 and NH x intermediates bound at Mo sites, thus greatly promoting the activity of the catalyst. First-principles calculations revealed that the heterojunction with sulfur vacancies effectively lowered the energy barrier in the potential-determining step for nitrogen reduction, and, in combination with operando spectroscopic analysis, validated the associative electrochemical nitrogen reduction pathway. This work provides new insights on manipulating chalcogenide vacancies and phase junctions for preparing monolayered MoS2 with unique catalytic properties.

| S-EPMC9400674 | biostudies-literature

Electrochemical ammonia synthesis via nitrate reduction on Fe single atom catalyst.

Project description:Electrochemically converting nitrate, a widespread water pollutant, back to valuable ammonia is a green and delocalized route for ammonia synthesis, and can be an appealing and supplementary alternative to the Haber-Bosch process. However, as there are other nitrate reduction pathways present, selectively guiding the reaction pathway towards ammonia is currently challenged by the lack of efficient catalysts. Here we report a selective and active nitrate reduction to ammonia on Fe single atom catalyst, with a maximal ammonia Faradaic efficiency of ~ 75% and a yield rate of up to ~ 20,000 μg h-1 mgcat.-1 (0.46 mmol h-1 cm-2). Our Fe single atom catalyst can effectively prevent the N-N coupling step required for N2 due to the lack of neighboring metal sites, promoting ammonia product selectivity. Density functional theory calculations reveal the reaction mechanisms and the potential limiting steps for nitrate reduction on atomically dispersed Fe sites.

| S-EPMC8128876 | biostudies-literature

Electrochemical ammonia synthesis by reduction of nitrate on Au doped Cu nanowires.

Project description:Electrochemical nitrate reduction reaction (NO3 -RR) to synthesize valuable ammonia (NH3) is considered as a green and appealing alternative to enable an artificial nitrogen cycle. However, as there are other NO3 -RR pathways present, selectively guiding the reaction pathway towards NH3 is currently challenged by the lack of efficient catalyst. Here, we demonstrate a novel electrocatalyst for NO3 -RR consisting of Au doped Cu nanowires on a copper foam (CF) electrode (Au-Cu NWs/CF), which delivers a remarkable NH3 yield rate of 5336.0 ± 159.2 μg h-1 cm-2 and an exceptional faradaic efficiency (FE) of 84.1 ± 1.0% at -1.05 V (vs. RHE). The 15N isotopic labelling experiments confirm that the yielded NH3 is indeed from the Au-Cu NWs/CF catalyzed NO3 -RR process. The XPS analysis and in situ infrared spectroscopy (IR) spectroscopy characterization results indicated that the electron transfer between the Cu and Au interface and oxygen vacancy synergistically decreased the reduction reaction barrier and inhibited the generation of hydrogen in the competitive reaction, resulting in a high conversion, selectivity and FE for NO3 -RR. This work not only develops a powerful strategy for the rational design of robust and efficient catalysts by defect engineering, but also provides new insights for selective nitrate electroreduction to NH3.

| S-EPMC10043758 | biostudies-literature

Lithium-mediated electrochemical nitrogen reduction: Mechanistic insights to enhance performance.

Project description:Green synthesis of ammonia by electrochemical nitrogen reduction reaction (NRR) shows great potential as an alternative to the Haber-Bosch process but is hampered by sluggish production rate and low Faradaic efficiency. Recently, lithium-mediated electrochemical NRR has received renewed attention due to its reproducibility. However, further improvement of the system is restricted by limited recognition of its mechanism. Herein, we demonstrate that lithium-mediated NRR began with electrochemical deposition of lithium, followed by two chemical processes of dinitrogen splitting and protonation to ammonia. Furthermore, we quantified the extent to which the freshly deposited active lithium lost its activity toward NRR due to a parasitic reaction between lithium and electrolyte. A high ammonia yield of 0.410 ± 0.038 μg s-1 cm-2 geo and Faradaic efficiency of 39.5 ± 1.7% were achieved at 20 mA cm-2 geo and 10 mA cm-2 geo, respectively, which can be attributed to fresher lithium obtained at high current density.

| S-EPMC8482511 | biostudies-literature

The impact of nitrogen oxides on electrochemical carbon dioxide reduction.

Project description:The electroreduction of carbon dioxide offers a promising avenue to produce valuable fuels and chemicals using greenhouse gas carbon dioxide as the carbon feedstock. Because industrial carbon dioxide point sources often contain numerous contaminants, such as nitrogen oxides, understanding the potential impact of contaminants on carbon dioxide electrolysis is crucial for practical applications. Herein, we investigate the impact of various nitrogen oxides, including nitric oxide, nitrogen dioxide, and nitrous oxide, on carbon dioxide electroreduction on three model electrocatalysts (i.e., copper, silver, and tin). We demonstrate that the presence of nitrogen oxides (up to 0.83%) in the carbon dioxide feed leads to a considerable Faradaic efficiency loss in carbon dioxide electroreduction, which is caused by the preferential electroreduction of nitrogen oxides over carbon dioxide. The primary products of nitrogen oxides electroreduction include nitrous oxide, nitrogen, hydroxylamine, and ammonia. Despite the loss in Faradaic efficiency, the electrocatalysts exhibit similar carbon dioxide reduction performances once a pure carbon dioxide feed is restored, indicating a negligible long-term impact of nitrogen oxides on the catalytic properties of the model catalysts.

| S-EPMC7672067 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data