Browse
Submit Data
Databases
API
Help

Dataset Information

8 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Facts or Artifacts: Pitfalls in Quantifying Sub-ppm Levels of Ammonia Produced from Electrochemical Nitrogen Reduction.

ABSTRACT: Synthesis of ammonia through electrochemical nitrogen reduction (ENR) is emerging as one of the attractive research areas in recent years, notwithstanding the enormous challenges it faces in quantification of ammonia at very low concentrations. Several reports claiming high production rate are unwittingly compromised by the accuracy of analyzing a very low concentration (<1 ppm) of ammonia in the electrolyte post-ENR reaction using the indophenol method. Therefore, in this work, we have highlighted the significance of selecting and standardizing a right protocol encompassing admissible levels of oxidants and a complexing agent, citrate (to mitigate the effect of interfering metal ions), through elaborate control experiments. In addition, the importance of setting the lowest limit of ammonia concentration that can be accurately quantified by the indophenol method is also justified. Further, the experimental observations were summarized into a protocol, which was followed to re-evaluate the performance of two well-claimed electrocatalysts for ENR reported recently in the literature.

SUBMITTER: Biswas SS

PROVIDER: S-EPMC8771696 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Selective Electrochemical Reduction of Nitrogen to Ammonia by Adjusting the Three-Phase Interface.

Project description:The electrochemical nitrogen reduction reaction (NRR) provides a sustainable and alternative avenue to the Haber-Bosch process for ammonia (NH3) synthesis. Despite the great efforts made on catalysts and electrolytes, unfortunately, current NRR suffers from low selectivity due to the overwhelming competition with the hydrogen evolution reaction (HER). Here, we present an adjusted three-phase interface to enhance nitrogen (N2) coverage on a catalyst surface and achieve a record-high Faradic efficiency (FE) up to 97% in aqueous solution. The almost entirely suppressed HER process combined with the enhanced NRR activity, benefiting from the efficient three-interface contact line, is responsible for the excellent selectivity toward NH3, as evidenced by the theoretical and experimental results. Our strategy also demonstrates the applicability to other catalysts that feature strong H adsorption ability, to boost the FE for NH3 synthesis above 90% and to improve the NRR activity by engineering the catalysts.

| S-EPMC6944493 | biostudies-literature

Active hydrogen boosts electrochemical nitrate reduction to ammonia.

Project description:Electrochemical nitrate reduction to ammonia is a promising alternative strategy to the traditional Haber-Bosch process but suffers from a low Faradaic efficiency and limited ammonia yield due to the sluggish multi-electron/proton-involved steps. Herein, we report a typical hollow cobalt phosphide nanosphere electrocatalyst assembled on a self-supported carbon nanosheet array synthesized with a confinement strategy that exhibits an extremely high ammonia yield rate of 8.47 mmol h-1 cm-2 through nitrate reduction reaction, which is highly superior to previously reported values to our knowledge. In situ experiments and theoretical investigations reveal that the dynamic equilibrium between the generation of active hydrogen on cobalt phosphide and its timely consumption by nitrogen intermediates leads to a superior ammonia yield with a high Faradaic efficiency. This unique insight based on active hydrogen equilibrium provides new opportunities for large-scale ammonia production through electrochemical techniques and can be further used for carbon dioxide capture.

| S-EPMC9794814 | biostudies-literature

Electrochemical N<sub>2</sub> Reduction to Ammonia Using Single Au/Fe Atoms Supported on Nitrogen-Doped Porous Carbon.

Project description:The electrochemical nitrogen reduction reaction (NRR) to ammonia (NH3) is a promising alternative route for an NH3 synthesis at ambient conditions to the conventional high temperature and pressure Haber-Bosch process without the need for hydrogen gas. Single metal ions or atoms are attractive candidates for the catalytic activation of non-reactive nitrogen (N2), and for future targeted improvement of NRR catalysts, it is of utmost importance to get detailed insights into structure-performance relationships and mechanisms of N2 activation in such structures. Here, we report density functional theory studies on the NRR catalyzed by single Au and Fe atoms supported in graphitic C2N materials. Our results show that the metal atoms present in the structure of C2N are the reactive sites, which catalyze the aforesaid reaction by strong adsorption and activation of N2. We further demonstrate that a lower onset electrode potential is required for Fe-C2N than for Au-C2N. Thus, Fe-C2N is theoretically predicted to be a potentially better NRR catalyst at ambient conditions than Au-C2N owing to the larger adsorption energy of N2 molecules. Furthermore, we have experimentally shown that single sites of Au and Fe supported on nitrogen-doped porous carbon are indeed active NRR catalysts. However, in contrast to our theoretical results, the Au-based catalyst performed slightly better with a Faradaic efficiency (FE) of 10.1% than the Fe-based catalyst with an FE of 8.4% at -0.2 V vs. RHE. The DFT calculations suggest that this difference is due to the competitive hydrogen evolution reaction and higher desorption energy of ammonia.

| S-EPMC7592340 | biostudies-literature

Electrochemical Nitrogen Fixation for Green Ammonia: Recent Progress and Challenges.

Project description:Ammonia, a key feedstock used in various industries, has been considered a sustainable fuel and energy storage option. However, NH3 production via the conventional Haber-Bosch process is costly, energy-intensive, and significantly contributing to a massive carbon footprint. An electrochemical synthetic pathway for nitrogen fixation has recently gained considerable attention as NH3 can be produced through a green process without generating harmful pollutants. This review discusses the recent progress and challenges associated with the two relevant electrochemical pathways: direct and indirect nitrogen reduction reactions. The detailed mechanisms of these reactions and highlight the recent efforts to improve the catalytic performances are discussed. Finally, various promising research strategies and remaining tasks are presented to highlight future opportunities in the electrochemical nitrogen reduction reaction.

| S-EPMC10427382 | biostudies-literature

Efficient electrocatalytic nitrogen reduction to ammonia with aqueous silver nanodots.

Project description:The electrocatalytic nitrogen (N2) reduction reaction (NRR) relies on the development of highly efficient electrocatalysts and electrocatalysis systems. Herein, we report a non-loading electrocatalysis system, where the electrocatalysts are dispersed in aqueous solution rather than loading them on electrode substrates. The system consists of aqueous Ag nanodots (AgNDs) as the catalyst and metallic titanium (Ti) mesh as the current collector for electrocatalytic NRR. The as-synthesized AgNDs, homogeneously dispersed in 0.1 M Na2SO4 solution (pH = 10.5), can achieve an NH3 yield rate of 600.4 ± 23.0 μg h-1 mgAg-1 with a faradaic efficiency (FE) of 10.1 ± 0.7% at -0.25 V (vs. RHE). The FE can be further improved to be 20.1 ± 0.9% at the same potential by using Ti mesh modified with oxygen vacancy-rich TiO2 nanosheets as the current collector. Utilizing the aqueous AgNDs catalyst, a Ti plate based two-electrode configured flow-type electrochemical reactor was developed to achieve an NH3 yield rate of 804.5 ± 30.6 μg h-1 mgAg-1 with a FE of 8.2 ± 0.5% at a voltage of -1.8 V. The designed non-loading electrocatalysis system takes full advantage of the AgNDs' active sites for N2 adsorption and activation, following an alternative hydrogenation mechanism revealed by theoretical calculations.

| S-EPMC9814735 | biostudies-literature

Electrochemical ammonia synthesis via nitrate reduction on Fe single atom catalyst.

Project description:Electrochemically converting nitrate, a widespread water pollutant, back to valuable ammonia is a green and delocalized route for ammonia synthesis, and can be an appealing and supplementary alternative to the Haber-Bosch process. However, as there are other nitrate reduction pathways present, selectively guiding the reaction pathway towards ammonia is currently challenged by the lack of efficient catalysts. Here we report a selective and active nitrate reduction to ammonia on Fe single atom catalyst, with a maximal ammonia Faradaic efficiency of ~ 75% and a yield rate of up to ~ 20,000 μg h-1 mgcat.-1 (0.46 mmol h-1 cm-2). Our Fe single atom catalyst can effectively prevent the N-N coupling step required for N2 due to the lack of neighboring metal sites, promoting ammonia product selectivity. Density functional theory calculations reveal the reaction mechanisms and the potential limiting steps for nitrate reduction on atomically dispersed Fe sites.

| S-EPMC8128876 | biostudies-literature

Coordinative Stabilization of Single Bismuth Sites in a Carbon-Nitrogen Matrix to Generate Atom-Efficient Catalysts for Electrochemical Nitrate Reduction to Ammonia.

Project description:Electrochemical nitrate reduction to ammonia powered by renewable electricity is not only a promising alternative to the established energy-intense and non-ecofriendly Haber-Bosch reaction for ammonia generation but also a future contributor to the ever-more important denitrification schemes. Nevertheless, this reaction is still impeded by the lack of understanding for the underlying reaction mechanism on the molecular scale which is necessary for the rational design of active, selective, and stable electrocatalysts. Herein, a novel single-site bismuth catalyst (Bi-N-C) for nitrate electroreduction is reported to produce ammonia with maximum Faradaic efficiency of 88.7% and at a high rate of 1.38 mg h-1 mgcat -1 at -0.35 V versus reversible hydrogen electrode (RHE). The active center (described as BiN2 C2 ) is uncovered by detailed structural analysis. Coupled density functional theory calculations are applied to analyze the reaction mechanism and potential rate-limiting steps for nitrate reduction based on the BiN2 C2 model. The findings highlight the importance of model catalysts to utilize the potential of nitrate reduction as a new-generation nitrogen-management technology based on the construction of efficient active sites.

| S-EPMC10558634 | biostudies-literature

Boosting selective nitrogen reduction to ammonia on electron-deficient copper nanoparticles.

Project description:Production of ammonia is currently realized by the Haber-Bosch process, while electrochemical N2 fixation under ambient conditions is recognized as a promising green substitution in the near future. A lack of efficient electrocatalysts remains the primary hurdle for the initiation of potential electrocatalytic synthesis of ammonia. For cheaper metals, such as copper, limited progress has been made to date. In this work, we boost the N2 reduction reaction catalytic activity of Cu nanoparticles, which originally exhibited negligible N2 reduction reaction activity, via a local electron depletion effect. The electron-deficient Cu nanoparticles are brought in a Schottky rectifying contact with a polyimide support which retards the hydrogen evolution reaction process in basic electrolytes and facilitates the electrochemical N2 reduction reaction process under ambient aqueous conditions. This strategy of inducing electron deficiency provides new insight into the rational design of inexpensive N2 reduction reaction catalysts with high selectivity and activity.

| S-EPMC6763479 | biostudies-literature

Electrochemical ammonia synthesis by reduction of nitrate on Au doped Cu nanowires.

Project description:Electrochemical nitrate reduction reaction (NO3 -RR) to synthesize valuable ammonia (NH3) is considered as a green and appealing alternative to enable an artificial nitrogen cycle. However, as there are other NO3 -RR pathways present, selectively guiding the reaction pathway towards NH3 is currently challenged by the lack of efficient catalyst. Here, we demonstrate a novel electrocatalyst for NO3 -RR consisting of Au doped Cu nanowires on a copper foam (CF) electrode (Au-Cu NWs/CF), which delivers a remarkable NH3 yield rate of 5336.0 ± 159.2 μg h-1 cm-2 and an exceptional faradaic efficiency (FE) of 84.1 ± 1.0% at -1.05 V (vs. RHE). The 15N isotopic labelling experiments confirm that the yielded NH3 is indeed from the Au-Cu NWs/CF catalyzed NO3 -RR process. The XPS analysis and in situ infrared spectroscopy (IR) spectroscopy characterization results indicated that the electron transfer between the Cu and Au interface and oxygen vacancy synergistically decreased the reduction reaction barrier and inhibited the generation of hydrogen in the competitive reaction, resulting in a high conversion, selectivity and FE for NO3 -RR. This work not only develops a powerful strategy for the rational design of robust and efficient catalysts by defect engineering, but also provides new insights for selective nitrate electroreduction to NH3.

| S-EPMC10043758 | biostudies-literature

Lithium-mediated electrochemical nitrogen reduction: Mechanistic insights to enhance performance.

Project description:Green synthesis of ammonia by electrochemical nitrogen reduction reaction (NRR) shows great potential as an alternative to the Haber-Bosch process but is hampered by sluggish production rate and low Faradaic efficiency. Recently, lithium-mediated electrochemical NRR has received renewed attention due to its reproducibility. However, further improvement of the system is restricted by limited recognition of its mechanism. Herein, we demonstrate that lithium-mediated NRR began with electrochemical deposition of lithium, followed by two chemical processes of dinitrogen splitting and protonation to ammonia. Furthermore, we quantified the extent to which the freshly deposited active lithium lost its activity toward NRR due to a parasitic reaction between lithium and electrolyte. A high ammonia yield of 0.410 ± 0.038 μg s-1 cm-2 geo and Faradaic efficiency of 39.5 ± 1.7% were achieved at 20 mA cm-2 geo and 10 mA cm-2 geo, respectively, which can be attributed to fresher lithium obtained at high current density.

| S-EPMC8482511 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data