Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Quantifying electron-transfer in liquid-solid contact electrification and the formation of electric double-layer.

ABSTRACT: Contact electrification (CE) has been known for more than 2600 years but the nature of charge carriers and their transfer mechanisms still remain poorly understood, especially for the cases of liquid-solid CE. Here, we study the CE between liquids and solids and investigate the decay of CE charges on the solid surfaces after liquid-solid CE at different thermal conditions. The contribution of electron transfer is distinguished from that of ion transfer on the charged surfaces by using the theory of electron thermionic emission. Our study shows that there are both electron transfer and ion transfer in the liquid-solid CE. We reveal that solutes in the solution, pH value of the solution and the hydrophilicity of the solid affect the ratio of electron transfers to ion transfers. Further, we propose a two-step model of electron or/and ion transfer and demonstrate the formation of electric double-layer in liquid-solid CE.

SUBMITTER: Lin S

PROVIDER: S-EPMC6972942 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Understanding contact electrification at liquid-solid interfaces from surface electronic structure.

Project description:The charge transfer phenomenon of contact electrification even exists in the liquid-solid interface by a tiny droplet on the solid surface. In this work, we have investigated the contact electrification mechanism at the liquid-solid interface from the electronic structures at the atomic level. The electronic structures display stronger modulations by the outmost shell charge transfer via surface electrostatic charge perturbation than the inter-bonding-orbital charge transfer at the liquid-solid interface, supporting more factors being involved in charge transfer via contact electrification. Meanwhile, we introduce the electrochemical cell model to quantify the charge transfer based on the pinning factor to linearly correlate the charge transfer and the electronic structures. The pinning factor exhibits a more direct visualization of the charge transfer at the liquid-solid interface. This work supplies critical guidance for describing, quantifying, and modulating the contact electrification induced charge transfer systems in triboelectric nanogenerators in future works.

| S-EPMC7979908 | biostudies-literature

Fundamental aspects of electric double layer force-distance measurements at liquid-solid interfaces using atomic force microscopy.

Project description:Atomic force microscopy (AFM) force-distance measurements are used to investigate the layered ion structure of Ionic Liquids (ILs) at the mica surface. The effects of various tip properties on the measured force profiles are examined and reveal that the measured ion position is independent of tip properties, while the tip radius affects the forces required to break through the ion layers as well as the adhesion force. Force data is collected for different ILs and directly compared with interfacial ion density profiles predicted by molecular dynamics. Through this comparison it is concluded that AFM force measurements are sensitive to the position of the ion with the larger volume and mass, suggesting that ion selectivity in force-distance measurements are related to excluded volume effects and not to electrostatic or chemical interactions between ions and AFM tip. The comparison also revealed that at distances greater than 1?nm the system maintains overall electroneutrality between the AFM tip and sample, while at smaller distances other forces (e.g., van der waals interactions) dominate and electroneutrality is no longer maintained.

| S-EPMC5009352 | biostudies-literature

A Simple Approach to Characterize Gas-Aqueous Liquid Two-phase Flow Configuration Based on Discrete Solid-Liquid Contact Electrification.

Project description:In this study, we first suggest a simple approach to characterize configuration of gas-aqueous liquid two-phase flow based on discrete solid-liquid contact electrification, which is a newly defined concept as a sequential process of solid-liquid contact and successive detachment of the contact liquid from the solid surface. This approach exhibits several advantages such as simple operation, precise measurement, and cost-effectiveness. By using electric potential that is spontaneously generated by discrete solid-liquid contact electrification, the configurations of the gas-aqueous liquid two-phase flow such as size of a gas slug and flow rate are precisely characterized. According to the experimental and numerical analyses on parameters that affect electric potential, gas slugs have been verified to behave similarly to point electric charges when the measuring point of the electric potential is far enough from the gas slug. In addition, the configuration of the gas-aqueous liquid two-phase microfluidic system with multiple gas slugs is also characterized by using the presented approach. For a proof-of-concept demonstration of using the proposed approach in a self-triggered sensor, a gas slug detector with a counter system is developed to show its practicality and applicability.

| S-EPMC4604473 | biostudies-literature

Electric double-layer capacitance between an ionic liquid and few-layer graphene.

Project description:Ionic-liquid gates have a high carrier density due to their atomically thin electric double layer (EDL) and extremely large geometrical capacitance Cg. However, a high carrier density in graphene has not been achieved even with ionic-liquid gates because the EDL capacitance CEDL between the ionic liquid and graphene involves the series connection of Cg and the quantum capacitance Cq, which is proportional to the density of states. We investigated the variables that determine CEDL at the molecular level by varying the number of graphene layers n and thereby optimising Cq. The CEDL value is governed by Cq at n < 4, and by Cg at n > 4. This transition with n indicates a composite nature for CEDL. Our finding clarifies a universal principle that determines capacitance on a microscopic scale, and provides nanotechnological perspectives on charge accumulation and energy storage using an ultimately thin capacitor.

| S-EPMC3615339 | biostudies-other

Interface inter-atomic electron-transition induced photon emission in contact-electrification.

Project description:Contact electrification (CE) (or triboelectrification) is the phenomena where charges are produced through physical contact between two materials. Here we report the atomic featured photon emission spectra during CE between two solid materials. Photon emission provides the evidence that electron transfer takes place at the interface from an atom in one material to another atom in the other material during CE. This process is the contact electrification induced interface photon emission spectroscopy (CEIIPES). It naturally paves a way to a spectroscopy corresponding to the CE at an interface, which might impact our understanding of the interaction between solids, liquids, and gases. The physics presented here could be expanded to Auger electron excitation, x-ray emission, and electron emission in CE for general cases, which remain to be explored. This could lead to a general field that may be termed as contact electrification induced interface spectroscopy (CEIIS).

| S-EPMC8462885 | biostudies-literature

Quantifying Double-Layer Potentials at Liquid-Gas Interfaces from Vibrational Sum-Frequency Generation.

Project description:Vibrational sum-frequency generation (SFG) spectroscopy is demonstrated as a fast method to quantify variations of the electric double-layer potential ϕ0 at liquid-gas interfaces. For this, mixed solutions of nonionic tetraethyleneglycol-monodecylether (C10E4) and cationic hexadecyltrimethylammonium bromide (C16TAB) surfactants were investigated using SFG spectroscopy and a thin-film pressure balance (TFPB). Derjaguin-Landau-Verwey-Overbeek analysis of disjoining pressure isotherms obtained with the TFPB technique provides complementary information on ϕ0, which we apply to validate the results from SFG spectroscopy. By using a single ϕ0 value, we can disentangle χ(2) and χ(3) contributions to the O-H stretching modes of interfacial water molecules in the SFG spectra. Having established the latter, we show that unknown double-layer potentials at the liquid-gas interface from solutions with different C16TAB/C10E4 mixing ratios can be obtained from an analysis of SFG spectra and are in excellent agreement with the complementary results from the TFPB technique.

| S-EPMC6354727 | biostudies-literature

Investigation of the Ionic Liquid Graphene Electric Double Layer in Supercapacitors Using Constant Potential Simulations.

Project description:In this work, we investigate the effect of the cation structure on the structure and dynamics of the electrode-electrolyte interface using molecular dynamics simulations. A constant potential method is used to capture the behaviour of 1-ethyl-3-methylimidazolium bis (trifluoromethane)sulfonimide ([C2mim][NTf2]) and butyltrimethylammonium bis(trifluoromethane) sulfonimide ([N4,1,1,1][NTf2]) ionic liquids at varying potential differences applied across the supercapacitor. We find that the details of the structure in the electric double layer and the dynamics differ significantly, yet the charge profile and capacitance do not vary greatly. For the systems considered, charging results in the rearrangement and reorientation of ions within ?1 nm of the electrode rather than the diffusion of ions to/from the bulk region. This occurs on timescales of O(10 ns) for the ionic liquids considered, and depends on the viscosity of the fluid.

| S-EPMC7693729 | biostudies-literature

Unravelling the electrochemical double layer by direct probing of the solid/liquid interface.

Project description:The electrochemical double layer plays a critical role in electrochemical processes. Whilst there have been many theoretical models predicting structural and electrical organization of the electrochemical double layer, the experimental verification of these models has been challenging due to the limitations of available experimental techniques. The induced potential drop in the electrolyte has never been directly observed and verified experimentally, to the best of our knowledge. In this study, we report the direct probing of the potential drop as well as the potential of zero charge by means of ambient pressure X-ray photoelectron spectroscopy performed under polarization conditions. By analyzing the spectra of the solvent (water) and a spectator neutral molecule with numerical simulations of the electric field, we discern the shape of the electrochemical double layer profile. In addition, we determine how the electrochemical double layer changes as a function of both the electrolyte concentration and applied potential.

| S-EPMC5013669 | biostudies-literature

A Poly(ionic liquid) Gel Electrolyte for Efficient all Solid Electrochemical Double-Layer Capacitor.

Project description:Polyionic liquid based gels have stimulated significant interest due to their wide applications in flexible electronics, such as wearable electronics, roll-up displays, smart mobile devices and implantable biosensors. Novel supported liquid gel electrolyte using polymerisable ionic liquid and an acrylate monomer, has been developed in this work by entrapping ionic liquid during polymerisation instead of post polymerisation impregnation. The chemically crosslinked polyionic liquid gel electrolyte (PIL) is prepared using 2-hydroxyethylmethacrylate (HEMA) monomer and a polymerisable ionic liquid, 1,4-di(vinylimidazolium)butane bisbromide (DVIMBr) in an ionic liquid (IL- 1-butyl-3 methylimidazolium hexafluorophosphate) as the polymerisation solvent, which resulted in in-situ entrapment of the IL in the gel during polymerisation and crosslinking of the polymer. The supported liquid gel electrolyte (SLG) material was characterised with thermal analysis, infrared spectroscopy, and dynamic mechanical analysis, and was found to be stable with good mechanical properties. The electrochemical analysis showed that these chemically cross-linked PIL gel electrolyte-supported ILs are suitable for solid-state, flexible supercapacitor applications.

| S-EPMC6053427 | biostudies-literature

The electric double layer effect and its strong suppression at Li<sup>+</sup> solid electrolyte/hydrogenated diamond interfaces.

Project description:The electric double layer (EDL) effect at solid electrolyte/electrode interfaces has been a key topic in many energy and nanoelectronics applications (e.g., all-solid-state Li+ batteries and memristors). However, its characterization remains difficult in comparison with liquid electrolytes. Herein, we use a novel method to show that the EDL effect, and its suppression at solid electrolyte/electronic material interfaces, can be characterized on the basis of the electric conduction characteristics of hydrogenated diamond(H-diamond)-based EDL transistors (EDLTs). Whereas H-diamond-based EDLT with a Li-Si-Zr-O Li+ solid electrolyte showed EDL-induced hole density modulation over a range of up to three orders of magnitude, EDLT with a Li-La-Ti-O (LLTO) Li+ solid electrolyte showed negligible enhancement, which indicates strong suppression of the EDL effect. Such suppression is attributed to charge neutralization in the LLTO, which is due to variation in the valence state of the Ti ions present. The method described is useful for quantitatively evaluating the EDL effect in various solid electrolytes.

| S-EPMC9814946 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data