Interface inter-atomic electron-transition induced photon emission in contact-electrification.
Ontology highlight
ABSTRACT:
SUBMITTER: Li D
PROVIDER: S-EPMC8462885 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Contact electrification (CE) involves a complex interplay of physical interactions in realistic material systems. For this reason, scientific consensus on the qualitative and quantitative importance of different physical mechanisms on CE remains a formidable task. The CE mechanism at a water/polymer interface is a crucial challenge owing to the poor understanding of charge transfer at the atomic level. First-principle density functional theory (DFT), used in the present work, proposes a new paradigm to address CE. Our results indicate that CE follows the same trend as the gap between the highest occupied and lowest unoccupied molecular orbitals (HOMO and LUMO) of polymers. Electron transfer occurs at the outmost atomic layer of the water/polymer interface and is closely linked to the functional groups and atom locations. When the polymer chains are parallel to the water layer, most electrons are transferred; conversely, if they are perpendicular to each other, the transfer of charges can be ignored. We demonstrate that a decrease in the interface distance between water and the polymer chains leads to CE in quantitative agreement with the electron cloud overlap model. We finally use DFT calculations to predict the properties of CE materials and their potential for triboelectric nanogenerator energy harvesting devices.
| S-EPMC8873953 | biostudies-literature
Project description:Electron transfer has been proven the dominant charge carrier during contact electrification at the liquid-solid interface. However, the effect of electron spin in contact electrification remains to be investigated. This study examines the charge transfer between different liquids and ferrimagnetic solids in a magnetic field, focusing on the contribution of O2 molecules to the liquid-solid contact electrification. The findings reveal that magnetic fields promote electron transfer at the O2-containing liquid-solid interfaces. Moreover, magnetic field-induced electron transfer increases at higher O2 concentrations in the liquids and decreases at elevated temperatures. The results indicate spin-selected electron transfer at liquid-solid interface. External magnetic fields can modulate the spin conversion of the radical pairs at the O2-containing liquid and ferrimagnetic solid interfaces due to the Zeeman interaction, promoting electron transfer. A spin-selected electron transfer model for liquid-solid contact electrification is further proposed based on the radical pair mechanism, in which the HO2 molecules and the free unpaired electrons from the ferrimagnetic solids are considered radical pairs. The spin conversion of the [HO2• •e-] pairs is affected by magnetic fields, rendering the electron transfer magnetic field-sensitive.
| S-EPMC9445095 | biostudies-literature
Project description:Contact electrification (CE), a common physical phenomenon, is worth discussing. However, there are few reports on the influence of atmosphere on CE, or on the performance of triboelectric nanogenerators (TENG), based on CE by encapsulating gas inside. Here, we propose physical processes of electron transfer to interpret the impact of the gaseous atmosphere on CE. An atmosphere-filled triboelectric nanogenerator (AF-TENG) encapsulated five different gas-components of air based on the vertical contact separation mode was prepared. The sensitivity (1.02 V·N-1) and the power density (9.63 μW·m-2) of the oxygen-atmosphere-filled AF-TENG were 229.03% and 157.81% higher than these (0.31 V·N-1 and 3.84 μW·m-2) of the nitrogen-atmosphere-filled AF-TENG. As the oxygen atom possesses more atomic energy levels than other atoms, this could act as a "bridge" for more electrons to directly transfer between the two materials. The device package under different atmospheres could not only strengthen understanding of CE and improve the performance of TENG, but also be potentially applicable to prevent and control unnecessary damage caused by static electricity.
| S-EPMC10382056 | biostudies-literature
Project description:Quantum dot-like single-photon sources in transition metal dichalcogenides (TMDs) exhibit appealing quantum optical properties but lack a well-defined atomic structure and are subject to large spectral variability. Here, we demonstrate electrically stimulated photon emission from individual atomic defects in monolayer WS2 and directly correlate the emission with the local atomic and electronic structure. Radiative transitions are locally excited by sequential inelastic electron tunneling from a metallic tip into selected discrete defect states in the WS2 bandgap. Coupling to the optical far field is mediated by tip plasmons, which transduce the excess energy into a single photon. The applied tip-sample voltage determines the transition energy. Atomically resolved emission maps of individual point defects closely resemble electronic defect orbitals, the final states of the optical transitions. Inelastic charge carrier injection into localized defect states of two-dimensional materials provides a powerful platform for electrically driven, broadly tunable, atomic-scale single-photon sources.
| S-EPMC7494346 | biostudies-literature
Project description:Contact electrification (CE) has been known for more than 2600 years but the nature of charge carriers and their transfer mechanisms still remain poorly understood, especially for the cases of liquid-solid CE. Here, we study the CE between liquids and solids and investigate the decay of CE charges on the solid surfaces after liquid-solid CE at different thermal conditions. The contribution of electron transfer is distinguished from that of ion transfer on the charged surfaces by using the theory of electron thermionic emission. Our study shows that there are both electron transfer and ion transfer in the liquid-solid CE. We reveal that solutes in the solution, pH value of the solution and the hydrophilicity of the solid affect the ratio of electron transfers to ion transfers. Further, we propose a two-step model of electron or/and ion transfer and demonstrate the formation of electric double-layer in liquid-solid CE.
| S-EPMC6972942 | biostudies-literature
Project description:All-electronic interrogation of biofluid flow velocity by electrical nanosensors incorporated in ultra-low-power or self-sustained systems offers the promise of enabling multifarious emerging research and applications. However, existing nano-based electrical flow sensing technologies remain lacking in precision and stability and are typically only applicable to simple aqueous solutions or liquid/gas dual-phase mixtures, making them unsuitable for monitoring low-flow (~micrometer/second) yet important characteristics of continuous biofluids (such as hemorheological behaviors in microcirculation). Here, we show that monolayer-graphene single microelectrodes harvesting charge from continuous aqueous flow provide an effective flow sensing strategy that delivers key performance metrics orders of magnitude higher than other electrical approaches. In particular, over six-months stability and sub-micrometer/second resolution in real-time quantification of whole-blood flows with multiscale amplitude-temporal characteristics are obtained in a microfluidic chip.
| S-EPMC7979811 | biostudies-literature
Project description:We report the enhanced charge storage characteristics of ultrananocrystalline diamond (UNCD) by contact electrification-induced hydrogenation. The non-catalytic hydrogenation of UNCD films was achieved by using platinum as an electron donor and sulfuric acid as a hydrogen proton donor, confirmed by Raman spectroscopy and time-of-flight secondary ion mass spectroscopy (TOF-SIMS). Chemical treatment with only a H2SO4 solution is responsible for the surface oxidation. The oxidation of UNCD resulted in an increase in the quantity and duration of the tribocharges. After non-catalytic hydrogenation, the generation of friction-induced tribocharges was enhanced and remained for three hours and more. We show that the hydrogen incorporation on grain boundaries is responsible for the improvement of charge storage capability, because the doped hydrogen acts as a trap site for the tribocharges. This lab-scale and succinct method can be utilized to control charge trap capability in nanoscale memory electronics.
| S-EPMC9056710 | biostudies-literature
Project description:Surface charge density has been demonstrated to be significantly impacted by the dielectric properties of tribomaterials. However, the ambiguous physical mechanism of dielectric manipulated charge behavior still restricts the construction of high-performance tribomaterials. Here, using the atomic force microscopy and Kelvin probe force microscopy, an in situ method was conducted to investigate the contact electrification and charge dynamics on a typical tribomaterial (i.e., BaTiO3/PVDF-TrFE nanocomposite) at nanoscale. Combined with the characterization of triboelectric device at macroscale, it is found that the number of transferred electrons increases with contact force/area and tends to reach saturation under increased friction cycles. The incorporated high permittivity BaTiO3 nanoparticles enhance the capacitance and electron trapping capability of the nanocomposites, efficiently inhibiting the lateral diffusion of electrons and improving the output performance of the triboelectric devices. Exponential decay of the surface potential is observed over monitoring time for all dielectric samples. At high BaTiO3 loadings, more electrons can drift into the bulk and combine with the induced charges on the back electrode, forming a large leakage current and accordingly accelerating the electron dissipation. Hence, the charge trapping/storing and dissipating, as well as the charge attracting properties, should be comprehensively considered in the design of high-performance tribomaterials.
| S-EPMC8829537 | biostudies-literature
Project description:Contact electrification (CE)-charging of surfaces that are contacted and separated, is a common phenomenon, however it is not completely understood yet. Recent studies using surface imaging techniques and chemical analysis revealed a 'spatial' bipolar distribution of charges at the nano dimension, which made a paradigm shift in the field. However, such analyses can only provide information about the charges that remained on the surface after the separation, providing limited information about the actual course of the CE event. Tapping common polymers and metal surfaces to each other and detecting the electrical potential produced on these surfaces 'in-situ' in individual events of contact and separation, we show that, charges are generated and transferred between the surfaces in both events; the measured potential is bipolar in contact and unipolar in separation. We show, the 'contact-charges' on the surfaces are indeed the net charges that results after the separation process, and a large contribution to tribocharge harvesting comes, in fact, from the electrostatic induction resulting from the generated CE charges. Our results refine the mechanism of CE providing information for rethinking the conventional ranking of materials' charging abilities, charge harvesting, and charge prevention.
| S-EPMC5802787 | biostudies-literature
Project description:This paper presents the first observation of coincidental emission of photons, electrons and secondary ions from individual C(60) keV impacts. An increase in photon, electron and secondary ion yields is observed as a function of C(60) projectile energy. The effect of target structure/composition on photon and electron emissions at the nanometer level is shown for a CsI target. The time-resolved photon emission may be characterized by a fast component emission in the UV-Vis range with a short decay time, while the electron and secondary ion emission follow a Poisson distribution.
| S-EPMC3015144 | biostudies-literature