Dataset Information

The seepage flow characteristics of hydrophobically associated polymers with different aggregation behaviours in porous media.

ABSTRACT: The polymer solution for oil displacement is subjected to strong shear action in practical application, and this action will affect its percolation characteristics in porous media. The effects of mechanical shearing on the solution properties and seepage characteristics of modified hydrophobically associated polymers and dendrimers with two different aggregation behaviours were studied. The results showed that mechanical shearing did not affect hydrophobic microzones. Polymers can re-associate to restore part of the network structure, thereby improving shear resistance (dendritic hydrophobically associating polymers > hydrophobically modified partially hydrolysed polyacrylamide). Polymers with 'cluster' aggregation behaviour enhanced solution performance, enabling them to establish higher resistance coefficient (RF) and residual resistance factor (RRF) in porous media but also bringing about injection difficulties. Increasing the injection rate would increase the injection pressure, but the established RF and RRF showed a downward trend. Mechanical shear pretreatment effectively improved the injectability of the polymer. To achieve polymer injection and flow control, pre-shearing polymer solution and low-speed injection can be used in field applications.

SUBMITTER: Shi L

PROVIDER: S-EPMC7029935 | biostudies-literature | 2020 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

The seepage flow characteristics of hydrophobically associated polymers with different aggregation behaviours in porous media.

Shi Leiting L Zhu Shijie S Ye Zhongbin Z Zhang Jian J Xue Xinsheng X Zhao Wensen W

Royal Society open science 20200122 1

The polymer solution for oil displacement is subjected to strong shear action in practical application, and this action will affect its percolation characteristics in porous media. The effects of mechanical shearing on the solution properties and seepage characteristics of modified hydrophobically associated polymers and dendrimers with two different aggregation behaviours were studied. The results showed that mechanical shearing did not affect hydrophobic microzones. Polymers can re-associate t ...[more]

PMID: 32218954

Similar Datasets

Project description:The application of nanotechnology to the petroleum industry has sparked recent interest in increasing oil recovery, while reducing environmental impact. Nanocellulose is an emerging nanoparticle that is derived from trees or waste stream from wood and fiber industries. Thus, it is taken from a renewable and sustainable source, and could therefore serve as a good alternative to current Enhanced Oil Recovery (EOR) technologies. However, before nanocellulose can be applied as an EOR technique, further understanding of its transport behavior and retention in porous media is required. The research documented in this paper examines retention mechanisms that occur during nanocellulose transport. In a series of experiments, nanocellulose particles dispersed in brine were injected into sandpacks and Berea sandstone cores. The resulting retention and permeability reduction were measured. The experimental parameters that were varied include sand grain size, nanocellulose type, salinity, and flow rate. Under low salinity conditions, the dominant retention mechanism was adsorption and when salinity was increased, the dominant retention mechanism shifted towards log-jamming. Retention and permeability reduction increased as grain size decreased, which results from increased straining of nanocellulose aggregates. In addition, each type of nanocellulose was found to have significantly different transport properties. Experiments with Berea sandstone cores indicate that some pore volume was inaccessible to the nanocellulose. As a general trend, the larger the size of aggregates in bulk solution, the greater the observed retention and permeability reduction. Salinity was found to be the most important parameter affecting transport. Increased salinity caused additional aggregation, which led to increased straining and filter cake formation. Higher flow rates were found to reduce retention and permeability reduction. Increased velocity was accompanied by an increase in shear, which is believed to promote breakdown of nanocellulose aggregates.

Dataset Information

The seepage flow characteristics of hydrophobically associated polymers with different aggregation behaviours in porous media.

Publications

The seepage flow characteristics of hydrophobically associated polymers with different aggregation behaviours in porous media.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets