Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

High-Performance Deep Ultraviolet Photodetector Based on NiO/?-Ga2O3 Heterojunction.

ABSTRACT: Ultraviolet (UV) photodetector has attracted extensive interests due to its wide-ranging applications from defense technology to optical communications. The use of wide bandgap metal oxide semiconductor materials is of great interest in the development of UV photodetector due to their unique electronic and optical properties. In this work, deep UV photodetector based on NiO/?-Ga2O3 heterojunction was developed and investigated. The ?-Ga2O3 layer was prepared by magnetron sputtering and exhibited selective orientation along the family of ([Formula: see text] 01) crystal plane after annealing. The photodetector demonstrated good performance with a high responsivity (R) of 27.43 AW-1 under a 245-nm illumination (27 ?Wcm-2) and the maximum detectivity (D*) of 3.14?×?1012 cmHz1/2?W-1, which was attributed to the p-NiO/n-?-Ga2O3 heterojunction.

SUBMITTER: Jia M

PROVIDER: S-EPMC7036083 | biostudies-literature | 2020 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

High-Performance Deep Ultraviolet Photodetector Based on NiO/β-Ga2O3 Heterojunction.

Jia Menghan M Wang Fang F Tang Libin L Xiang Jinzhong J Teng Kar Seng KS Lau Shu Ping SP

Nanoscale research letters 20200222 1

Ultraviolet (UV) photodetector has attracted extensive interests due to its wide-ranging applications from defense technology to optical communications. The use of wide bandgap metal oxide semiconductor materials is of great interest in the development of UV photodetector due to their unique electronic and optical properties. In this work, deep UV photodetector based on NiO/β-Ga2O3 heterojunction was developed and investigated. The β-Ga2O3 layer was pr ...[more]

PMID: 32088767

Similar Datasets

A Self-Powered High-Responsivity, Fast-Response-Speed Solar-Blind Ultraviolet Photodetector Based on CuO/β-Ga2O3 Heterojunction with Built-In Potential Control

Project description:Controlling built-in potential can enhance the photoresponse performance of self-powered photodetectors. Among the methods for controlling the built-in potential of self-powered devices, postannealing is simpler, more efficient, and less expensive than ion doping and alternative material research. In this study, a CuO film was deposited on a β-Ga2O3 epitaxial layer via reactive sputtering with an FTS system, and a self-powered solar-blind photodetector was fabricated through a CuO/β-Ga2O3 heterojunction and postannealed at different temperatures. The postannealing process reduced the defects and dislocations at the interface between each layer and affected the electrical and structural properties of the CuO film. After postannealing at 300 °C, the carrier concentration of the CuO film increased from 4.24 × 1018 to 1.36 × 1020 cm−3, bringing the Fermi level toward the valence band of the CuO film and increasing the built-in potential of the CuO/β-Ga2O3 heterojunction. Thus, the photogenerated carriers were rapidly separated, increasing the sensitivity and response speed of the photodetector. The as-fabricated photodetector with 300 °C postannealing exhibited a photo-to-dark current ratio of 1.07 × 103; responsivity and detectivity of 30.3 mA/W and 1.10 × 1012 Jones, respectively; and fast rise and decay times of 12 ms and 14 ms, respectively. After three months of storage in an open-air space, the photocurrent density of the photodetector was maintained, indicating good stability with aging. These results suggest that the photocharacteristics of CuO/β-Ga2O3 heterojunction self-powered solar-blind photodetectors can be improved through built-in potential control using a postannealing process.

| S-EPMC10005126 | biostudies-literature

High-Performance Ultraviolet Photodetector Based on a Zinc Oxide Nanoparticle@Single-Walled Carbon Nanotube Heterojunction Hybrid Film.

Project description:A hybrid film consisting of zinc oxide nanoparticles (ZnO NPs) and carbon nanotubes (CNTs) is formed on a glass substrate using a simple and swift spin coating process for the use in ultraviolet photodetectors (UV PDs). The incorporation of various types of CNTs into ZnO NPs (ZnO@CNT) enhances the performance of UV PDs with respect to sensitivity, photoresponse, and long-term operation stability when compared with pristine ZnO NP films. In particular, the introduction of single-walled CNTs (SWNTs) exhibits a superior performance when compared with the multiwalled CNTs (MWNTs) because SWNTs can not only facilitate the stability of free electrons generated by the O2 desorption on ZnO under UV irradiation owing to the built-in potential between ZnO and SWNT heterojunctions, but also allow facile and efficient transport pathways for electrons through SWNTs with high aspect ratio and low defect density. Furthermore, among the various SWNTs (arc-discharged (A-SWNT), Hipco (H-SWNT), and CoMoCat (C-SWNT) SWNTs), we demonstrate the ZnO@A-SWNT hybrid film exhibits the best performance because of higher conductivity and aspect ratio in A-SWNTs when compared with those of other types of SWNTs. At the optimized conditions for the ZnO@A-SWNT film (ratio of A-SWNTs and ZnO NPs and electrode distance), ZnO@A-SWNT displays a sensitivity of 4.9 × 103 % with an on/off current ratio of ~104 at the bias of 2 V under the UV wavelength of 365 nm (0.47 mW/cm2). In addition, the stability in long-term operation and photoresponse time are significantly improved by the introduction of A-SWNTs into the ZnO NP film when compared with the bare ZnO NPs film.

| S-EPMC7075298 | biostudies-literature

High-Performance Self-Powered Ultraviolet Photodetector Based on Nano-Porous GaN and CoPc p-n Vertical Heterojunction.

Project description:Gallium nitride (GaN) is a superior candidate material for fabricating ultraviolet (UV) photodetectors (PDs) by taking advantage of its attractive wide bandgap (3.4 eV) and stable chemical and physical properties. However, the performance of available GaN-based UV PDs (e.g., in terms of detectivity and sensitivity) still require improvement. Fabricating nanoporous GaN (porous-GaN) structures and constructing organic/inorganic hybrids are two effective ways to improve the performance of PDs. In this study, a novel self-powered UV PD was developed by using p-type cobalt phthalocyanine (CoPc) and n-type porous-GaN (CoPc/porous-GaN) to construct a p-n vertical heterojunction via a thermal vapor deposition method. Under 365 nm 0.009 mWcm-2 light illumination, our device showed a photoresponsivity of 588 mA/W, a detectivity of 4.8 × 1012 Jones, and a linear dynamic range of 79.5 dB, which are better than CoPc- and flat-GaN (CoPc/flat-GaN)-based PDs. The high performance was mainly attributed to the built-in electric field (BEF) generated at the interface of the CoPc film and the nanoporous-GaN, as well as the nanoporous structure of GaN, which allows for a higher absorptivity of light. Furthermore, the device showed excellent stability, as its photoelectrical property and on/off switching behavior remained the same, even after 3 months.

| S-EPMC6780170 | biostudies-literature

Ultraviolet Photodetector Based on a Beta-Gallium Oxide/Nickel Oxide/Beta-Gallium Oxide Heterojunction Structure.

Project description:In this paper, an n-p-n structure based on a β-Ga2O3/NiO/β-Ga2O3 junction was fabricated. The device based on the β-Ga2O3/NiO/β-Ga2O3 structure, as an ultraviolet (UV) photodetector, was compared with a p-n diode based on a NiO/β-Ga2O3 structure, where it showed rectification and 10 times greater responsivity and amplified the photocurrent. The reverse current increased in proportion to the 1.5 power of UV light intensity. The photocurrent amplification was related to the accumulation of holes in the NiO layer given by the heterobarrier for holes from the NiO layer to the β-Ga2O3 layer. Moreover, the device could respond to an optical pulse of less than a few microseconds.

| S-EPMC10575374 | biostudies-literature

High performance molybdenum disulfide amorphous silicon heterojunction photodetector.

Project description:One important use of layered semiconductors such as molybdenum disulfide (MoS2) could be in making novel heterojunction devices leading to functionalities unachievable using conventional semiconductors. Here we demonstrate a metal-semiconductor-metal heterojunction photodetector, made of MoS2 and amorphous silicon (a-Si), with rise and fall times of about 0.3 ms. The transient response does not show persistent (residual) photoconductivity, unlike conventional a-Si devices where it may last 3-5 ms, thus making this heterojunction roughly 10X faster. A photoresponsivity of 210 mA/W is measured at green light, the wavelength used in commercial imaging systems, which is 2-4X larger than that of a-Si and best reported MoS2 devices. The device could find applications in large area electronics, such as biomedical imaging, where a fast response is critical.

| S-EPMC3731647 | biostudies-literature

Deep-Ultraviolet Transparent Electrode Design for High-Performance and Self-Powered Perovskite Photodetector.

Project description:In this study, a highly crystalline and transparent indium-tin-oxide (ITO) thin film was prepared on a quartz substrate via RF sputtering to fabricate an efficient bottom-to-top illuminated electrode for an ultraviolet C (UVC) photodetector. Accordingly, the 26.6 nm thick ITO thin film, which was deposited using the sputtering method followed by post-annealing treatment, exhibited good transparency to deep-UV spectra (67% at a wavelength of 254 nm), along with high electrical conductivity (11.3 S/cm). Under 254 nm UVC illumination, the lead-halide-perovskite-based photodetector developed on the prepared ITO electrode in a vertical structure exhibited an excellent on/off ratio of 1.05 × 104, a superb responsivity of 250.98 mA/W, and a high specific detectivity of 4.71 × 1012 Jones without external energy consumption. This study indicates that post-annealed ITO ultrathin films can be used as electrodes that satisfy both the electrical conductivity and deep-UV transparency requirements for high-performance bottom-illuminated optoelectronic devices, particularly for use in UVC photodetectors.

| S-EPMC10675135 | biostudies-literature

Optical, electrical and photoresponse data of flexible and high-performing NiO/ZnO ultraviolet photodetector.

Project description:In this work, the fabrication process flow of ZnO/NiO heterojunction device on a PET substrate, optical properties, physical properties and photoresponses presented (Patel and Kim, 2017) [1]. Absorption coefficient and Tauc plots of ZnO and NiO samples are summarized. Digital photograph of flexible NiO/ZnO/ITO device on a PET substrate is presented. Surface morphologies of ITO on PET, polycrystalline ZnO on ITO/PET, and nanocrystalline NiO on ZnO/ITO/PET is presented with a demonstration of scissor-cut design. NiO/ZnO/ITO/PET photoelectric device has advantages of large-scale production and light-weight. Transmittance, reflectance and absorbance dataset of the native PET substrate (100 μm thick) is summarized. Photoresponses of the transparent (NiO/ZnO/ITO/PET) device with bias modulations including the rising edge and falling edge are included in this article.

| S-EPMC5988381 | biostudies-literature

Ultraviolet Photodetector Based on Poly(3,4-Ethylenedioxyselenophene)/ZnO Core-Shell Nanorods p-n Heterojunction.

Project description:In this work, we successfully assembled an organic-inorganic core-shell hybrid p-n heterojunction ultraviolet photodetector by the electropolymerization deposition of poly(3,4-ethylenedioxyselenophene) (PEDOS) on the surface of zinc oxide nanoarrays (ZnO NRs). The structures of composite were confirmed by FTIR, UV-Vis, XRD and XPS. Mott-Schottky analysis was used to study the p-n heterojunction structure. The photodetection properties of ZnO NRs/PEDOS heterojunction ultraviolet photodetector were systematically investigated current-voltage (I-V) and current-time (I-t) analysis under different bias voltages. The results showed that PEDOS films uniformly grew on ZnO NRs surface and core-shell structure was formed. The p-n heterojunction structure was formed with strong built-in electric field between ZnO NRs and PEDOS. Under the irradiation of UV light, the device showed a good rectification behavior. The responsivity, detection rate and the external quantum efficiency of the ultraviolet photodetector reached to 247.7 A/W, 3.41 × 1012 Jones and 84,000% at 2 V bias, respectively. The rise time (τr) and fall time (τf) of ZnO NRs/PEDOS UV photodetector were obviously shortened compared to ZnO UV photodetector. The results show that the introduction of PEDOS effectively improves the performance of the UV photodetector.

| S-EPMC9314489 | biostudies-literature

Lateral multilayer/monolayer MoS2 heterojunction for high performance photodetector applications.

Project description:Inspired by the unique, thickness-dependent energy band structure of 2D materials, we study the electronic and optical properties of the photodetector based on the as-exfoliated lateral multilayer/monolayer MoS2 heterojunction. Good gate-tunable current-rectifying characteristics are observed with a rectification ratio of 103 at V gs?=?10?V, which may offer an evidence on the existence of the heterojunction. Upon illumination from ultraviolet to visible light, the multilayer/monolayer MoS2 heterojunction shows outstanding photodetective performance, with a photoresponsivity of 103?A/W, a photosensitivity of 1.7?×?105 and a detectivity of 7?×?1010 Jones at 470?nm light illumination. Abnormal photoresponse under positive gate voltage is observed and analyzed, which indicates the important role of the heterojunction in the photocurrent generation process. We believe that these results contribute to a better understanding on the fundamental physics of band alignment for multilayer/monolayer MoS2 heterojunction and provide us a feasible solution for novel electronic and optoelectronic devices.

| S-EPMC5495793 | biostudies-literature

Optimized performance III-nitride-perovskite-based heterojunction photodetector via asymmetric electrode configuration.

Project description:Organometal halide perovskite photodetectors have recently drawn significant attention due to their excellent potential to perform as broadband photodetectors. However, the photoresponse in the ultraviolet (UV) spectrum can be improved by introducing wide bandgap semiconductors. In this work, we report on a methylammonium lead iodide/p-type gallium nitride (MAPI/p-GaN) heterojunction photodetector. We demonstrate that the device is capable of detecting in the UV region by p-GaN being hybridized with MAPI. We further investigate different symmetric and asymmetric metal-electrode contacts to enhance the device performance including the response time. The asymmetric electrode configuration is found to be the most optimal configuration which results in high photoresponse (photo-responsivity is 55 mA W-1 and fall time < 80 ms). As the light illumination occurs through the GaN side, its presence ultimately reduces MAPI degradation due to efficient absorption of the UV photons by GaN film.

| S-EPMC9049596 | biostudies-literature