Dataset Information

Data supporting consolidating emission indices of a diesel engine powered by carbon nanoparticle-doped diesel/biodiesel emulsion fuels using life cycle assessment framework.

ABSTRACT: Integrated environmental analysis using life cycle assessment for different fuel blends used in a single-cylinder diesel engine was performed to select the most eco-friendly fuel blend. More specifically, the inventory data in support of the integrated environmental analysis of water-emulsified 5% biodiesel/diesel blends (B5) containing different levels of carbon nanoparticles (i.e., 38, 75, and 150?µM) as a novel fuel nanoadditives at a fixed engine speed of 1000?rpm and four different engine loads (i.e., 25, 50, 75, and 100%) are presented. Neat diesel, B5, and B5 containing water (3?wt.%) were used as controls. Raw data related to the production and combustion of fuel blends were experimentally collected. Industrial (i.e., experiments at large scale) and laboratory (i.e., experiments at small scale) data were used for fuel blends production while experimental data obtained by engine tests were used for the combustion stage. Then raw data were processed with the IMPACT 2002+ methods by using the SimaPro software and EcoInvent database and were then converted into environmental impacts. Accordingly, six supplementary files including the inventory data on integrated environmental analysis of the different fuel blends are presented (Supplementary Files 1-6). The data could be applied for integrated environmental analysis in order to avoid subjective weighting of combustion parameters for selecting the most eco-friendly fuel blend for use in diesel engines. More specifically, by developing a single score indicator obtained through conducting integrated combustion analysis, comparison of various fuel blends is largely facilitated.

SUBMITTER: Hosseinzadeh-Bandbafha H

PROVIDER: S-EPMC7160430 | biostudies-literature | 2020 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Data supporting consolidating emission indices of a diesel engine powered by carbon nanoparticle-doped diesel/biodiesel emulsion fuels using life cycle assessment framework.

Hosseinzadeh-Bandbafha Homa H Tabatabaei Meisam M Aghbashlo Mortaza M Khanali Majid M Khalife Esmail E Roodbar Shojaei Taha T Mohammadi Pouya P

Data in brief 20200321

Integrated environmental analysis using life cycle assessment for different fuel blends used in a single-cylinder diesel engine was performed to select the most eco-friendly fuel blend. More specifically, the inventory data in support of the integrated environmental analysis of water-emulsified 5% biodiesel/diesel blends (B5) containing different levels of carbon nanoparticles (<i>i.e.</i>, 38, 75, and 150 µM) as a novel fuel nanoadditives at a fixed engine speed of 1000 rpm and four different e ...[more]

PMID: 32322611

Similar Datasets

Project description:Diesel exhaust emissions have been reported for a number of engine operating strategies, after-treatment technologies, and fuels. However, information is limited regarding emissions of many pollutants during idling and when biodiesel fuels are used. This study investigates regulated and unregulated emissions from both light-duty passenger car (1.7 L) and medium-duty (6.4 L) diesel engines at idle and load and compares a biodiesel blend (B20) to conventional ultralow sulfur diesel (ULSD) fuel. Exhaust aftertreatment devices included a diesel oxidation catalyst (DOC) and a diesel particle filter (DPF). For the 1.7 L engine under load without a DOC, B20 reduced brake-specific emissions of particulate matter (PM), elemental carbon (EC), nonmethane hydrocarbons (NMHCs), and most volatile organic compounds (VOCs) compared to ULSD; however, formaldehyde brake-specific emissions increased. With a DOC and high load, B20 increased brake-specific emissions of NMHC, nitrogen oxides (NOx), formaldehyde, naphthalene, and several other VOCs. For the 6.4 L engine under load, B20 reduced brake-specific emissions of PM2.5, EC, formaldehyde, and most VOCs; however, NOx brake-specific emissions increased. When idling, the effects of fuel type were different: B20 increased NMHC, PM2.5, EC, formaldehyde, benzene, and other VOC emission rates from both engines, and changes were sometimes large, e.g., PM2.5 increased by 60% for the 6.4 L/2004 calibration engine, and benzene by 40% for the 1.7 L engine with the DOC, possibly reflecting incomplete combustion and unburned fuel. Diesel exhaust emissions depended on the fuel type and engine load (idle versus loaded). The higher emissions found when using B20 are especially important given the recent attention to exposures from idling vehicles and the health significance of PM2.5. The emission profiles demonstrate the effects of fuel type, engine calibration, and emission control system, and they can be used as source profiles for apportionment, inventory, and exposure purposes.

Project description:Biodiesel is regarded by many as a "greener" alternative fuel to petroleum diesel with potentially lower health risk. However, recent studies examining biodiesel particulate matter (PM) characteristics and health effects are contradictive, and typically utilize PM generated by passenger car engines in laboratory settings. There is a critical need to analyze diesel and biodiesel PM generated in a "real-world" setting where heavy duty-diesel (HDD) engines and commercially purchased fuel are utilized. This study compares the mass concentrations, chemical composition and cytotoxicity of real-world PM from combustion of both petroleum diesel and a waste grease 20% biodiesel blend (B20) at a community recycling center operating HDD nonroad equipment. PM was analyzed for metals, elemental/organic carbon (EC/OC), polycyclic aromatic hydrocarbons (PAHs), and nitro-polycyclic aromatic hydrocarbons (N-PAHs). Cytotoxicity in a human lung epithelial cell line (BEAS-2B) following 24h exposure to the real-world particles was also evaluated. On average, higher concentrations for both EC and OC were measured in diesel PM. B20 PM contained significantly higher levels of Cu and Mo whereas diesel PM contained significantly higher concentrations of Pb. Principal component analysis determined Mo, Cu, and Ni were the metals with the greatest loading factor, suggesting a unique pattern related to the B20 fuel source. Total PAH concentration during diesel fuel use was 1.9 times higher than during B20 operations; however, total N-PAH concentration was 3.3 times higher during B20 use. Diesel PM cytotoxicity was 8.5 times higher than B20 PM (p<0.05) in a BEAS-2B cell line. This study contributes novel data on real-world, nonroad engine sources of metals, PAH and N-PAH species, comparing tailpipe PM vs. PM collected inside the equipment cabin. Results suggest PM generated from burning petroleum diesel in nonroad engines may be more harmful to human health, but the links between exposure, composition and toxicity are not straightforward.

Dataset Information

Data supporting consolidating emission indices of a diesel engine powered by carbon nanoparticle-doped diesel/biodiesel emulsion fuels using life cycle assessment framework.

Publications

Data supporting consolidating emission indices of a diesel engine powered by carbon nanoparticle-doped diesel/biodiesel emulsion fuels using life cycle assessment framework.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets