Dataset Information

Effect of modeling porous media on the response of gamma-gamma well-logging tool.

ABSTRACT: The well logging is known as a technique of making petrophysical measurements in the sub-surface earth formations through a drilled borehole to reach the characterization of the physical properties of rocks and fluids. Considering the fact that reservoirs are complex fractured media which the fluid can flow through the porosities, the distribution model of oil in the medium needs to be investigated in detail and to be well quantified. To study this effect, a typical gamma-gamma logging tool containing 137Cs source and two NaI detectors was modeled by using the MCNPX code. The medium was filled with numerous matrix-shaped blocks, each including rectangular cubes for modeling the oil flow in the formation. For an arbitrary set of oil concentrations and various formation materials, the response of the detectors for this model was studied. Taking into account the results corresponding to the traditional homogeneous mixture model for the formation, it was found that the deviations between the count rates for two models reach to about 10% and 22% for short spacing and far spacing detectors, respectively. The results also show that the slopes of the straight-line fits to the count rates, which is important for the evaluation of the density, deviate between about 73.3% and 53.8% for two simulated models. Investigating the effect of the presence of the drilling fluid on the count rate of the proposed model showed that for a given thickness of mudcake and the formation density, both detectors show approximately the same percentage of change in counting rate. However, these counts for the proposed model deviate from those of the mixture model between 5.1% and 28%. It can be concluded that defining a model for describing heterogeneities of a natural porous medium can effectively account for the prediction of density measurement in logging tools.

SUBMITTER: Rasouli FS

PROVIDER: S-EPMC7176707 | biostudies-literature | 2020 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Effect of modeling porous media on the response of gamma-gamma well-logging tool.

Rasouli Fatemeh S FS Masoudi S Farhad SF

Scientific reports 20200422 1

The well logging is known as a technique of making petrophysical measurements in the sub-surface earth formations through a drilled borehole to reach the characterization of the physical properties of rocks and fluids. Considering the fact that reservoirs are complex fractured media which the fluid can flow through the porosities, the distribution model of oil in the medium needs to be investigated in detail and to be well quantified. To study this effect, a typical gamma-gamma logging tool cont ...[more]

PMID: 32322003

Similar Datasets

Project description:The propagation of foam in an oil reservoir depends on the creation and stability of the foam in the reservoir, specifically the creation and stability of foam films, or lamellae. As the foam propagates far from the injection well, superficial velocity and pressure gradient decrease with distance from the well. Experimental (Friedmann et al. Steam-foam mechanistic field trial in the midway-sunset field. SPERE. 1994, 9 (4), 297-304) and theoretical (Ashoori, et al. Roles of Transient and Local Equilibrium Foam Behaviour in Porous Media: Traveling Wave. Colloids Surf. A 2011, 337 (1-3), 228-242). studies relate concerns about foam propagation at low superficial velocity to the minimum velocity or pressure gradient for foam generation near the well (Gauglitz et al. Foam Generation in Homogeneous Porous Media. Chem. Eng. Sci. 2002, 57, 4037-4052; Rossen et al. Percolation Theory of Creation and Mobilization of Foams in Porous Media. AI Chem Eng. J. 1990, 36, (8)). The objective of this work is to measure the impact of surfactant concentration and gas fractional flow on foam generation. Theory (Kam et al. Model for Foam Generation in Homogeneous Media. SPE J. 2003, 8 (4): 417-42, SPE-87334-PA; Rossen 1990) relates foam generation to gas fractional flow and, indirectly, to the stability of foam films, or lamellae, which in turn depends on surfactant concentration (Apaydin et al. Surfactant Concentration and End Effects on Foam Flow in Porous Media. (Apaydin et al.Transp Porous Media. 2001, 43, 511-536). However, the link between foam generation and surfactant concentration has not been established experimentally. In our experiments, nitrogen foam is generated in a core of Bentheimer sandstone. The foam-generation experiments consist of measuring the minimum velocity for foam generation as a function of gas fractional flow at three surfactant concentrations well above the critical micelle concentration. Experimental results show that the minimum velocity for foam generation decreases with increasing liquid fraction, as shown by previous foam generation studies (Friedmann et al., 1994; Rossen and Gauglitz, 1990). Additionally, our results show that this velocity decreases with increasing surfactant concentration, far above the CMC. We also propose a workflow for screening out the experimental artifacts that can distort the trigger velocity.

Project description:Little is known about the fate and transport of the "new-horizon" multifunctional nanohybrids in the environment. Saturated sand-packed column experiments ( n = 66) were therefore performed to investigate the transport and retention of reduced graphene oxide (RGO)-metal oxide (Fe3O4, TiO2, and ZnO) nanohybrids under environmentally relevant conditions (mono- and divalent electrolytes and natural organic matter). Classical colloid science principles (Derjaguin-Landau-Verwey-Overbeek (DLVO) theory and colloid filtration theory (CFT)) and mathematical models based on the one-dimensional convection-dispersion equation were employed to describe and predict the mobility of RGO-Fe3O4, RGO-TiO2, and RGO-ZnO nanohybrids in porous media. Results indicate that the mobility of the three nanohybrids under varying experimental conditions is overall explainable by DLVO theory and CFT. Numerical simulations suggest that the one-site kinetic retention model (OSKRM) considering both time- and depth-dependent retention accurately approximated the breakthrough curves (BTCs) and retention profiles (RPs) of the nanohybrids concurrently; whereas, others (e.g., two-site retention model) failed to capture the BTCs and/or RPs. This is primarily because blocking BTCs and exponential/hyperexponential/uniform RPs occurred, which is within the framework of OSKRM featuring time- (for kinetic Langmuirian blocking) and depth-dependent (for exponential/hyperexponential/uniform) retention kinetics. Employing fitted parameters (maximum solid-phase retention capacity: Smax = 0.0406-3.06 cm3/g; and first-order attachment rate coefficient: ka = 0.133-20.6 min-1) extracted from the OSKRM and environmentally representative physical variables (flow velocity (0.00441-4.41 cm/min), porosity (0.24-0.54), and grain size (210-810 μm)) as initial input conditions, the long-distance transport scenarios (in 500 cm long sand columns) of the three nanohybrids were predicted via forward simulation. Our findings address the existing knowledge gap regarding the impact of physicochemical factors on the transport of the next-generation, multifunctional RGO-metal oxide nanohybrids in the subsurface.

Dataset Information

Effect of modeling porous media on the response of gamma-gamma well-logging tool.

Publications

Effect of modeling porous media on the response of gamma-gamma well-logging tool.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets