Minimising the present and future plastic waste, energy and environmental footprints related to COVID-19.
Ontology highlight
ABSTRACT:
SUBMITTER: Klemes JJ
PROVIDER: S-EPMC7183989 | biostudies-literature | 2020 Jul
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:This review article aims to suggest recycling technological options in India and illustrates plastic recycling clusters and reprocessing infrastructure for plastic waste (PW) recycling in India. The study shows that a majority of states in India are engaged in recycling, road construction, and co-processing in cement kilns while reprocessing capabilities among the reprocessors are highest for polypropylene (PP) and polyethylene (PE) polymer materials. This review suggests that there are key opportunities for mechanical recycling, chemical recycling, waste-to-energy approaches, and bio-based polymers as an alternative to deliver impact to India's PW problem. On the other hand, overall, polyurethane, nylon, and polyethylene terephthalate appear most competitive for chemical recycling. Compared to conventional fossil fuel energy sources, polyethylene (PE), polypropylene (PP), and polystyrene are the three main polymers with higher calorific values suitable for energy production. Also, multi-sensor-based artificial intelligence and blockchain technology and digitization for PW recycling can prove to be the future for India in the waste flow chain and its management. Overall, for a circular plastic economy in India, there is a necessity for a technology-enabled accountable quality-assured collaborative supply chain of virgin and recycled material.Supplementary informationThe online version contains supplementary material available at 10.1007/s13762-022-04079-x.
| S-EPMC8976220 | biostudies-literature
Project description:A new mechanochemical method was developed to convert polymer wastes, polyethylene (PE), polypropylene (PP), and polyvinyl chloride (PVC), to fuel gases (H2, CH4, and CO) under ball-milling with KMnO4 at room temperature. By using various solid-state characterizations (XPS, SEM, EDS, FTIR, and NMR), and density functional theory calculations, it was found that the activation followed the hydrogen atom transfer (HAT) mechanism. Two metal oxidant molecules were found to abstract two separate hydrogen atoms from the α-CH and β-CH units of substrates, [-βCH2-αCH(R)-]n, where R = H in PE, R = γCH3 in PP, and R = Cl in PVC, resulting in a di-radical, [-βCH•-αC•(R)-]. Subsequently, the two unpaired electrons of the di-radical were recombined into an alkene intermediate, [-βCH = αC(R)-], which underwent further oxidation to produce H2, CH4, and CO gases.
| S-EPMC8588166 | biostudies-literature
Project description:Since the late 1990s, the trend of plastic waste shipment from developed to developing countries has been increasing. In 2017, China announced an unprecedented ban on its import of most plastic waste, resulting in a sharp decline in global plastic waste trade flow and changes in the treatment structure of countries, whose impacts on global environmental sustainability are enormous but yet unexamined. Here, through the life cycle assessment (LCA) method, we quantified the environmental impacts of changes in the flow patterns and treatment methods of 6 types of plastic waste in 18 countries subsequent to the ban. In the short term, the ban significantly improved four midpoint indicators of environmental impact, albeit contributed to global warming. An annual saving of about 2.35 billion euros of eco-cost was realized, which is equivalent to 56% of plastic waste global trade value in 2017. To achieve global environmental sustainability in the long run, countries should gradually realize the transition from export to domestic management, and from landfill to recycling, which would realize eco-costs savings of about 1.54-3.20 billion euros.
| S-EPMC7813828 | biostudies-literature
Project description:Plastic products have played significant roles in protecting people during the COVID-19 pandemic. The widespread use of personal protective gear created a massive disruption in the supply chain and waste disposal system. Millions of discarded single-use plastics (masks, gloves, aprons, and bottles of sanitizers) have been added to the terrestrial environment and could cause a surge in plastics washing up the ocean coastlines and littering the seabed. This paper attempts to assess the environmental footprints of the global plastic wastes generated during COVID-19 and analyze the potential impacts associated with plastic pollution. The amount of plastic wastes generated worldwide since the outbreak is estimated at 1.6 million tonnes/day. We estimate that approximately 3.4 billion single-use facemasks/face shields are discarded daily as a result of COVID-19 pandemic, globally. Our comprehensive data analysis does indicate that COVID-19 will reverse the momentum of years-long global battle to reduce plastic waste pollution. As governments are looking to turbo-charge the economy by supporting businesses weather the pandemic, there is an opportunity to rebuild new industries that can innovate new reusable or non-plastic PPEs. The unanticipated occurrence of a pandemic of this scale has resulted in unmanageable levels of biomedical plastic wastes. This expert insight attempts to raise awareness for the adoption of dynamic waste management strategies targeted at reducing environmental contamination by plastics generated during the COVID-19 pandemic.
| S-EPMC7896824 | biostudies-literature
Project description:Majority of the million tons of plastic produced each year is being disposed after single-use. Plastic bottle, bags, food containers, gloves, and cup that end up in landfills and environment could linger for hundreds to thousands of years. Moreover, COVID-19 pandemic caused by the novel coronavirus (SARS-CoV-2), will also exacerbate the global plastic pollution as the use of personal protective equipment (PPE i.e., gloves, masks) became mandatory to prevent the spread of the virus. Plastic eventually breaking down in micro & nanoscopic bits due to physical or chemical or biological actions in the environment, can enter animal and human food web. So, plastic management programs need to be more robust with a focus on the prevention of the micro and nanoplastics entrance into the environment and food web. In the present pandemic situation, it is even more necessary to know about how much plastic waste is being generated and how different countries are coping up with their plastic waste management. In this review, we have elucidated how global plastic production rise during COVID-19 and how it would contribute to short and long-term impacts on the environment. Plastic pollution during the pandemic will increase the GHS emissions in the incineration facilities. Improper disposal of plastics into the oceans and lands would endanger the marine species and subsequently human lives. We have also assessed how the increased plastic pollution will aggravate the micro and nanoscale plastic problem, which have now become an emerging concern. This review will be helpful for people to understand the plastic usage and its subsequent consequences in the environment in a pandemic like COVID-19.
| S-EPMC8464355 | biostudies-literature
Project description:Coronavirus Diseases 2019 (COVID-19) pandemic has a huge impact on the plastic waste management in many countries due to the sudden surge of medical waste which has led to a global waste management crisis. Improper management of plastic waste may lead to various negative impacts on the environment, animals, and human health. However, adopting proper waste management and the right technologies, looking in a different perception of the current crisis would be an opportunity. About 40% of the plastic waste ended up in landfill, 25% incinerated, 16% recycled and the remaining 19% are leaked into the environment. The increase of plastic wastes and demand of plastic markets serve as a good economic indicator for investor and government initiative to invest in technologies that converts plastic waste into value-added product such as fuel and construction materials. This will close the loop of the life cycle of plastic waste by achieving a sustainable circular economy. This review paper will provide insight of the state of plastic waste before and during the COVID-19 pandemic. The treatment pathway of plastic waste such as sterilisation technology, incineration, and alternative technologies available in converting plastic waste into value-added product were reviewed.
| S-EPMC9759681 | biostudies-literature
Project description:Polypropylene (PP) makes up a large share of our plastic waste. We investigated the conversion of PP over the industrial Fluid Catalytic Cracking catalyst (FCC-cat) used to produce gasoline from crude oil fractions. We studied transport limitations arising from the larger size of polymers compared to the crude oil-based feedstock by testing the components of this catalyst separately. Infrared spectroscopy and confocal fluorescence microscopy revealed the role of the FCC matrix in aromatization, and the zeolite Y domains in coking. An equilibrium catalyst (ECAT), discarded during FCC operation as waste, produced the same aromatics content as a fresh FCC-cat, while coking decreased significantly, likely due to the reduced accessibility and activity of the zeolite domains and an enhanced cracking activity of the matrix due to metal deposits present in ECAT. This mechanistic understanding provides handles for further improving the catalyst composition towards higher aromatics selectivity.
| S-EPMC8362022 | biostudies-literature
Project description:The research on the high-value utilization of biomass has good application prospects and is conducive to sustainable development. In this paper, three different types of activators (potassium hydroxide, phosphoric acid, and polypropylene) were used to carbonize jujube branches at high temperatures of 600 °C and 800 °C, and then the PEG/jujube charcoal composite phase change materials (PCM) were prepared by vacuum impregnation of polyethylene glycol (PEG). The results showed that the carbon support activated by polypropylene (PP) had a richer pore size distribution than the other two activation methods, and the 800 °C carbonization carrier loaded PEG had a higher phase change enthalpy than the composite material at 600 °C. The mesoporous and macroporous structures were staggered with PP-activated jujube charcoal at 800 °C, with a specific surface area of 1082.2 m²/g, the melting enthalpy of the composite material reached 114.92 J/g, and the enthalpy of solidification reached 106.15 J/g after PEG loading. The diffraction peak of the composite phase change material was the superposition of PEG and carbon matrix, which proved that the loading process was physical adsorption. After 200 thermal cycles, the melting enthalpy and crystallization enthalpy were only reduced by 4.3% and 4.1%, respectively, and they remained stable and leak-free at the melting point of PEG for 2 h, demonstrating good thermal stability of the composite phase change materials. In summary, PP has obvious advantages over traditional activation, and the carbon-supported PEG phase change composite after PP activation is a biochar energy storage material with excellent performance.
| S-EPMC9919484 | biostudies-literature
Project description:The COVID-19 pandemic has resulted in an unprecedented surge of production, consumption, and disposal of personal protective equipment (PPE) including face masks, disposable gloves, and disinfectant wipes, which are often made of single use plastic. Widespread public use of these items has imposed pressure on municipalities to properly collect and dispose of potentially infectious PPE. There has been a lack of structured monitoring efforts to quantify the emerging trend of improperly disposed of PPE debris. In this study, we present a baseline monitoring survey to describe the spatial distribution of PPE debris during the COVID-19 pandemic from the metropolitan city of Toronto, Canada. Our objectives were to: (1) quantify PPE debris types among surveyed areas and; (2) identify PPE debris densities and accumulation of surveyed areas. A total of 1306 PPE debris items were documented, with the majority being disposable gloves (44%), followed by face masks (31%), and disinfecting wipes (25%). Of the face masks, 97% were designed for single use while only 3% were reusable. Of the surveyed locations, the highest daily average densities of PPE debris were recorded in the large and medium-sized grocery store parking lots and the hospital district (0.00475 items/m2, 0.00160 items/m2, and 0.00133 items/m2 respectively). The two surveyed residential areas had the following highest PPE densities (0.00029 items/m2 and 0.00027 items/m2), while the recreational trail had the lowest densities (0.00020 items/m2). Assuming a business-as-usual accumulation, an estimated 14,298 PPE items will be leaked as debris in just the surveyed areas annually. To facilitate proper disposal of PPE debris by the public we recommend development of municipal efforts to improve PPE collection methods that are informed by the described PPE waste pathways.
| S-EPMC7833877 | biostudies-literature
Project description:SARS-CoV-2 has recently emerged, becoming a global threat, affecting directly all human beings owing to its morbidity and mortality and indirectly, due to the enormous economic and psychological impact produced by social isolation, the most effective measure so far, but unsustainable for a long period. The scientific effort to understand and control SARS-CoV-2 transmission and clinical impact has been huge, and important achievements are highlighted in this review. Diagnosis is central and is the first step in recognizing and fighting any infectious agent. Instrumental to that is the quality of the data, relying on serological and molecular surveys in addition to trustworthy clinical records. However, the fast spread of a virus adapted for human-to-human respiratory transmission raised a demand for millions of molecular tests that are simply not available. Several candidate drugs are under evaluation in clinical trials. Those with an already recognized safety profile are more auspicious, since, if proven effective, can cut several steps of production and phase 2 and 3 trials. More than one hundred vaccine prototypes are in different stages of development, however, safety and efficacy evaluations cannot be obviated, implicating, most optimistically, in at least months for us to have an effective immunization, the definite measure to allow a safe return to the pre-pandemic lifestyle. Science has never been more necessary and present in daily life. Relying on the best of human wit is the only way out to this pandemic, saving as many lives as possible.
| S-EPMC7405018 | biostudies-literature