Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhanced Solar Light Photocatalytic Activity of Ag Doped TiO₂-Ag₃PO₄ Composites.

ABSTRACT: Composites comprised of Ag₃PO₄ and bare TiO₂ (TiO₂@Ag₃PO₄) or silver doped TiO₂ (Ag@TiO₂-Ag₃PO₄) have been synthesized by coupling sol-gel and precipitation methods. For the sake of comparison, also the bare components have been similarly prepared. All the samples have been characterized by X-ray diffraction (XRD), UV-vis diffuse reflectance spectroscopy (DRS), scanning electron microscopy (SEM), Fourier transformed infrared spectroscopy (FTIR), photoelectrochemical measurements, and specific surface area (SSA) analysis. The optoelectronic and structural features of the samples have been related to their photocatalytic activity for the degradation of 4-nitrophenol under solar and UV light irradiation. Coupling Ag₃PO₄ with silver doped TiO₂ mitigates photocorrosion of the Ag₃PO₄ counterpart, and remarkably improves the photocatalytic activity under solar light irradiation with respect to the components, to the TiO₂-Ag₃PO₄ sample, and to the benchmark TiO₂ Evonik P25. These features open the route to future applications of this material in the field of environmental remediation.

SUBMITTER: Hamrouni A

PROVIDER: S-EPMC7221970 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Ag3PO4/NiO Composites with Enhanced Photocatalytic Activity under Visible Light.

Project description:Black NiO powders were prepared by a hydrothermal method. Moreover, the visible light-driven Ag3PO4/NiO photocatalyst composites were successfully synthesized by in situ precipitation method. These samples were structurally characterized by X-ray diffraction and Rietveld refinement. The strong interaction between the phases and the defects in the samples was affected by the formation of the composites, as identified by Fourier transform infrared spectroscopy and Raman spectroscopy. UV-vis diffuse reflectance spectroscopy exhibited enhanced light absorption for all Ag3PO4/NiO composites, suggesting the effective interaction between the phases. Moreover, field-emission scanning electron microscopy images revealed the presence of NiO microflowers composed of nanoflakes in contact with Ag3PO4 microparticles. The composite with 5% NiO presented enhanced photocatalytic efficiency in comparison with pure Ag3PO4, degrading 96% of rhodamine B (RhB) dye in just 15 min under visible light; however, the recycling experiments confirmed that the composite with 75% NiO showed superior stability. The recombination of the electron-hole pairs was considered for the measurement of the photoluminescence of the samples. These measurements were performed to evaluate the possible causes for the difference in the photocatalytic responses of the composites. From these experimental results, possible photocatalytic mechanisms for RhB degradation over Ag3PO4/NiO composites under visible-light irradiation were proposed.

| S-EPMC7469368 | biostudies-literature

Preparation and visible-light photocatalytic properties of the floating hollow glass microspheres - TiO2/Ag3PO4 composites.

Project description:A novel floating visible-light photocatalyst (HGMs-TiO2/Ag3PO4) composite was prepared using amino modified low-density hollow glass microspheres (HGMs) as carriers to disperse and support TiO2 and Ag3PO4 photocatalysts. The surface morphology, crystal structure and optical properties of the HGMs-TiO2/Ag3PO4 composites were characterized and the Ag3PO4 content on the surface of the microspheres was determined by atomic absorption spectrometry (AAS). Methylene blue (MB) was chose as the organic pollutant to investigate the visible-light catalytic properties of the HGMs-TiO2/Ag3PO4 composites. For HGM composite photocatalysts, when the theoretical mass ratio of TiO2 to Ag3PO4 on the surface of HGMs is 1 : 1.5, the visible-light catalytic activity of the composite is superior to pure Ag3PO4 and a TiO2/Ag3PO4 photocatalyst with a mass ratio of 1 : 1.5 under the same conditions, due to the increased light-contact area and the photocatalytic active sites, since the TiO2 and Ag3PO4 particles can be well dispersed on the surface of the floating HGMs. Furthermore, the deposits of TiO2 and Ag3PO4 on the HGM surface form a heterostructure, facilitating the separation of electron-hole (e- - h+) in the energy band, and elevating the photocatalytic activity and cycle stability of Ag3PO4. This work indicates that floating HGMs-TiO2/Ag3PO4 composites could become a promising photocatalyst for organic dye removal due to the low cost and high visible-light responsiveness.

| S-EPMC9059536 | biostudies-literature

Enhanced photocatalytic activity of Se-doped TiO2 under visible light irradiation.

Project description:Anatase TiO2 is a typical photocatalyst, and its excellent performance is limited in ultraviolet light range due to its wide band gap of 3.2?eV. A series of Se-doped TiO2 nanoparticles in anatase structure with various Se concentrations up to 17.1?at.% were prepared using sol-gel method. The doped Se ions are confirmed to be mainly in the valence state of?+?4, which provides extra electronic states in the band gap of TiO2. The band gap is effectively narrowed with the smallest gap energy of 2.17?eV, and the photocatalytic activity is effectively improved due to the extended absorption range. The photocatalytic activity was evaluated by the degradation of Rhodamine B (RhB) in aqueous solution under visible light irradiation. The results show that Se doping significantly improves the photocatalytic activity of TiO2 and 13.63?at.% Se-doped TiO2 has the best performance.

| S-EPMC5993730 | biostudies-literature

Z-scheme BiVO4/Ag/Ag2S composites with enhanced photocatalytic efficiency under visible light.

Project description:The Z-scheme BiVO4/Ag/Ag2S photocatalyst was fabricated via a two-step route. The as-prepared samples were characterized by XRD, FE-SEM, HRTEM, XPS and UV-vis diffuse reflectance spectroscopy. The results of PL and photocurrent response tests demonstrate that the ternary BiVO4/Ag/Ag2S composites had a high separation and migration efficiency of photoexcited carriers. As a result, the ternary photocatalyst exhibits enhanced photocatalytic activity for decomposing Rhodamine B (RhB) under LED light (420 nm) irradiation. The results of trapping experiments demonstrate both h+ and ˙OH play crucial roles in decomposing RhB molecules. Additionally, the energy band structures and density of states (DOS) of BiVO4 and Ag2S were investigated via the density functional theory (DFT) method. Finally, a Z-scheme electron migration mechanism of BiVO4 → Ag → Ag2S was proposed based on the experimental and calculated results.

| S-EPMC9056282 | biostudies-literature

Tetrahedral UMOFNs/Ag3PO4 Core-Shell Photocatalysts for Enhanced Photocatalytic Activity under Visible Light.

Project description:A new visible-light-responsive tetrahedral ultrathin metal-organic framework nanosheet (UMOFNs)/Ag3PO4 composite photocatalyst with a core-shell structure was readily synthesized by sonication in an organic solvent. Characterization methods for the photocatalyst included X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy, and UV-vis diffuse reflectance spectroscopy. The XRD patterns of the composite photocatalyst before and after visible-light irradiation demonstrated that trace amounts of Ag ions in the composite photocatalyst easily transformed into Ag nanoparticles, which play a role in promoting charge separation at the interface of a heterojunction. The UMOFNs/Ag3PO4 composite photocatalyst showed higher photocatalytic activity for the photodegradation of 2-chlorophenol (2-CP) under visible-light irradiation (>420 nm) than Ag3PO4. The complete degradation of 2-CP was achieved in 7 min using the tetrahedral UMOFNs/Ag3PO4 core-shell photocatalyst, and the apparent reaction rate was approximately 26 times higher than that of pure Ag3PO4. Further, a scavenger experiment showed h+ and O2 •- were the major reactive species involved in the photocatalytic reaction system. This enhanced photocatalytic activity results from the efficient separation of photoinduced electron-hole pairs and the increase of interface area between Ag3PO4, UMOFNs, and the Ag nanoparticles.

| S-EPMC6777078 | biostudies-literature

Efficient Solar Light Photocatalyst Made of Ag3PO4 Coated TiO2-SiO2 Microspheres.

Project description:Solar light active photocatalyst was prepared as silver phosphate (Ag3PO4) coating on titania-silica (TiO2-SiO2) microspheres. Titania-silica microsphere was obtained by spray drying TiO2-SiO2 colloidal solutions, whereas Ag3PO4 was applied by wet impregnation. XRD on the granules and SEM analysis show that the silver phosphate particles cover the surface of the titania-silica microspheres, and UV-visible diffuse reflectance analysis highlights that Ag3PO4/TiO2-SiO2 composites can absorb the entire visible light spectrum. BET measurements show higher specific surface area of the composite samples compared to bare Ag3PO4. Photocatalytic activity was evaluated by dye degradation tests under solar light irradiation. The prepared catalysts follow a pseudo-first-order rate law for dye degradation tests under solar light irradiation. The composite catalysts with an Ag3PO4/TiO2-SiO2 ratio of 1:1.6 wt% show better catalytic activity towards both rhodamine B and methylene blue degradation and compared with the results with uncoated TiO2-SiO2 microspheres and the benchmark commercial TiO2 (Evonik-P25) as a reference. The composite photocatalyst showed exceptional efficiency compared to its pristine counterparts and reference material. This is explained as having a higher surface area with optimum light absorption capacity.

| S-EPMC9921011 | biostudies-literature

CdSe nanorod/TiO2 nanoparticle heterojunctions with enhanced solar- and visible-light photocatalytic activity.

Project description:CdSe nanorods (NRs) with an average length of ≈120 nm were prepared by a solvothermal process and associated to TiO2 nanoparticles (Aeroxide® P25) by annealing at 300 °C for 1 h. The content of CdSe NRs in CdSe/TiO2 composites was varied from 0.5 to 5 wt %. The CdSe/TiO2 heterostructured materials were characterized by XRD, TEM, SEM, XPS, UV-visible spectroscopy and Raman spectroscopy. TEM images and XRD patterns show that CdSe NRs with wurtzite structure are associated to TiO2 particles. The UV-visible spectra demonstrate that the narrow bandgap of CdSe NRs serves to increase the photoresponse of CdSe/TiO2 composites until ≈725 nm. The CdSe (2 wt %)/TiO2 composite exhibits the highest photocatalytic activity for the degradation of rhodamine B in aqueous solution under simulated sunlight or visible light irradiation. The enhancement in photocatalytic activity likely originates from CdSe sensitization of TiO2 and the heterojunction between these materials which facilitates electron transfer from CdSe to TiO2. Due to its high stability (up to ten reuses without any significant loss in activity), the CdSe/TiO2 heterostructured catalysts show high potential for real water decontamination.

| S-EPMC5753051 | biostudies-literature

Enhanced Photocatalytic Activity of Nanoparticle-Aggregated Ag-AgX(X = Cl, Br)@TiO2 Microspheres Under Visible Light.

Project description:Ag-AgX(X = Cl, Br)@TiO2 nanoparticle-aggregated spheres with different mass ratio of R = TiO2/Ag(X) from 35:1 to 5:1 were synthesized by a facile sol-gel technique with post-photoreduction. The photocatalytic activities of both Ag-AgCl@TiO2 and Ag-AgBr@TiO2 under visible light are effectively improved by ~3 times relative to TiO2 NPAS under the simulated sunlight for the decomposition of methyl orange (MO). Ag-AgBr@TiO2 showed 30% improvement and less stable in photocatalytic activity than that of AgCl@TiO2. The role of Ag and AgX nanoparticles on the surface of Ag-AgX(X = Cl, Br)@TiO2 was discussed. Ag on these samples not only can efficiently harvest visible light especially for AgCl, but also efficiently separate excited electrons and holes via the fast electron transfer from AgX(X = Cl, Br) to metal Ag nanoparticles and then to TiO2-aggregated spheres on the surface of heterostructure. On the basis of their efficient and stable photocatalytic activities under visible-light irradiation, these photocatalysts could be widely used for degradation of organic pollutants in aqueous solution.

| S-EPMC6199042 | biostudies-literature

BiOCl/TiO2/diatomite composites with enhanced visible-light photocatalytic activity for the degradation of rhodamine B.

Project description:A BiOCl/TiO2/diatomite (BTD) composite was synthesized via a modified sol-gel method and precipitation/calcination method for application as a photocatalyst and shows promise for degradation of organic pollutants in wastewater upon visible-light irradiation. In the composite, diatomite was used as a carrier to support a layer of titanium dioxide (TiO2) nanoparticles and bismuth oxychloride (BiOCl) nanosheets. The results show that TiO2 nanoparticles and BiOCl nanosheets uniformly cover the surface of diatomite and bring TiO2 and BiOCl into close proximity. Rhodamine B was used as the target degradation product and visible light (λ > 400 nm) was used as the light source for the evaluation of the photocatalytic properties of the prepared BTD composite. The results show that the catalytic performance of the BTD composite under visible-light irradiation is much higher than that of TiO2 or BiOCl alone. When the molar ratio of BiOCl to TiO2 is 1:1 and the calcination temperature is 400 °C, the composite was found to exhibit the best catalytic effect. Through the study of the photocatalytic mechanism, it is shown that the strong visible-light photocatalytic activity of the BTD composite results mainly from the quick migration of photoelectrons from the conduction band of TiO2/diatomite to the surface of BiOCl, which promotes the separation effect and reduces the recombination rate of the photoelectron-hole pair. Due to the excellent catalytic performance, the BTD composite shows great potential for wide application in the field of sewage treatment driven by solar energy.

| S-EPMC6664401 | biostudies-literature

Enhanced photocatalytic activity of a visible-light-driven ternary WO3/Ag/Ag3PO4 heterojunction: a discussion on electron transfer mechanisms.

Project description:WO3/Ag3PO4 with different weight ratios were prepared by ultrasonic assisted two-step deposition method. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence spectroscopy (PL) and transmission electron microscopy (TEM). The photocatalytic activities of all samples were evaluated by the degradation of rhodamine B (RhB) under visible light irradiation. WA-60 shows the highest photocatalytic activity in the WA-x series composite, while the photocatalytic activity of WAA-60 is the best among all samples. The free radical trapping experiments show that photogenerated holes (h+) are the main active species. The Ag nanoparticles produced by the decomposition of Ag3PO4 are located at the interface of Ag3PO4/WO3, which promotes the separation efficiency of photogenerated electrons and holes. To further explain the photocatalytic mechanism, electrochemical and physical tests are introduced to explore the flow of electrons inside the catalyst.

| S-EPMC9122569 | biostudies-literature