Dataset Information

Microfluidic Chamber Design for Controlled Droplet Expansion and Coalescence.

ABSTRACT: The defined formation and expansion of droplets are essential operations for droplet-based screening assays. The volumetric expansion of droplets causes a dilution of the ingredients. Dilution is required for the generation of concentration graduation which is mandatory for many different assay protocols. Here, we describe the design of a microfluidic operation unit based on a bypassed chamber and its operation modes. The different operation modes enable the defined formation of sub-µL droplets on the one hand and the expansion of low nL to sub-µL droplets by controlled coalescence on the other. In this way the chamber acts as fluidic interface between two fluidic network parts dimensioned for different droplet volumes. Hence, channel confined droplets of about 30-40 nL from the first network part were expanded to cannel confined droplets of about 500 to about 2500 nL in the second network part. Four different operation modes were realized: (a) flow rate independent droplet formation in a self-controlled way caused by the bypassed chamber design, (b) single droplet expansion mode, (c) multiple droplet expansion mode, and (d) multiple droplet coalescence mode. The last mode was used for the automated coalescence of 12 droplets of about 40 nL volume to produce a highly ordered output sequence with individual droplet volumes of about 500 nL volume. The experimental investigation confirmed a high tolerance of the developed chamber against the variation of key parameters of the dispersed-phase like salt content, pH value and fluid viscosity. The presented fluidic chamber provides a solution for the problem of bridging different droplet volumes in a fluidic network.

SUBMITTER: Kielpinski M

PROVIDER: S-EPMC7231328 | biostudies-literature | 2020 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Microfluidic Chamber Design for Controlled Droplet Expansion and Coalescence.

Kielpinski Mark M Walther Oliver O Cao Jialan J Henkel Thomas T Köhler J Michael JM Groß G Alexander GA

Micromachines 20200410 4

The defined formation and expansion of droplets are essential operations for droplet-based screening assays. The volumetric expansion of droplets causes a dilution of the ingredients. Dilution is required for the generation of concentration graduation which is mandatory for many different assay protocols. Here, we describe the design of a microfluidic operation unit based on a bypassed chamber and its operation modes. The different operation modes enable the defined formation of sub-µL droplets ...[more]

PMID: 32290165

Similar Datasets

Project description:Coalescence-induced condensate droplet jumping from superhydrophobic surfaces can be exploited in condensation heat-transfer enhancement, imparting self-cleaning behavior to surfaces, anti-icing coatings, and other industrial uses. An intriguing application would exploit this phenomenon to achieve thermal rectification using a sealed vapor chamber with opposing superhydrophilic and superhydrophobic surfaces. During forward operation, continuous evaporation occurs from the heated superhydrophilic evaporator surface; self-propelled jumping returns the condensate droplets from the cooler superhydrophobic surface to the evaporator, allowing passive recirculation of the working fluid without a reliance on gravity or capillary wicking for fluid return. In reverse operation, when the superhydrophobic surface is heated, the absence of a mechanism for fluid return from the cooler superhydrophilic side to the evaporator restricts heat transport across the (low conductivity) vapor gap. The effectiveness of this jumping-droplet thermal diode can be enhanced by maximizing the distance between the opposing superhydrophobic and superhydrophilic surfaces. It is, therefore, important to investigate the height to which the condensate droplets jump from the superhydrophobic surfaces such that replenishment of liquid to the superhydrophilic surface is maintained. In this study, we systematically investigate the height to which the condensate droplets jump from the hierarchical superhydrophobic surfaces having truncated microcones coated with nanostructures. The condensate droplet jumping height increases with a decrease in microcone pitch. A general theoretical model that accounts for surface adhesion, line tension, and initial wetting states of multiple coalescing droplets of different radii is used to predict and explain the experimentally observed trend of droplet jumping height with surface roughness. The insights provided regarding the effect of surface topography on droplet jumping height are critical to the design of high-performance thermal diode devices.

Dataset Information

Microfluidic Chamber Design for Controlled Droplet Expansion and Coalescence.

Publications

Microfluidic Chamber Design for Controlled Droplet Expansion and Coalescence.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets