Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Pilot plant study on nitrogen and phosphorus removal in marine wastewater by marine sediment with sequencing batch reactor.

ABSTRACT: Effective biological treatment of marine wastewater is not well-known. Accumulation of nitrogen and phosphorus from land-based effluent is a crucial cause of red-tide in marine systems. The purpose of the study is to reduce nitrogen and phosphorus in marine wastewater with a pilot plant-scale sequencing batch reactor (SBR) system by using marine sediment as eco-friendly and effective biological materials, and elucidate which bacterial strains in sludge from marine sediment influence the performance of SBR. By applying eco-friendly high efficiency marine sludge (eco-HEMS), the treatment performance was 15 m3 d-1 of treatment amount in 4.5 m3 of the reactor with the average removal efficiency of 89.3% for total nitrogen and 94.9% for total phosphorus at the optimal operation condition in summer. Moreover, the average removal efficiency was 84.0% for total nitrogen and 88.3% for total phosphorus in winter although biological treatment efficiency in winter is generally lower due to bacterial lower activity. These results were revealed by the DNA barcoding analysis of 16s rRNA amplicon sequencing of samples from the sludge in winter. The comparative analysis of the bacterial community composition in sludge at the high efficiency of the system showed the predominant genera Psychromonas (significantly increased to 45.6% relative abundance), Vibrio (13.3%), Gaetbulibacter (5.7%), and Psychroserpens (4.3%) in the 4 week adaptation after adding marine sediment, suggesting that those predominant bacteria influenced the treatment performance in winter.

SUBMITTER: Kim J

PROVIDER: S-EPMC7236998 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Partial Nitrification and Enhanced Biological Phosphorus Removal in a Sequencing Batch Reactor Treating High-Strength Wastewater.

Project description:Complex and high levels of various pollutants in high-strength wastewaters hinder efficient and stable biological nutrient removal. In this study, the changes in pollutant removal performance and microbial community structure in a laboratory-scale anaerobic/aerobic sequencing batch reactor (SBR) treating simulated pre-fermented high-strength wastewater were investigated under different influent loading conditions. The results showed that when the influent chemical oxygen demand (COD), total nitrogen (TN), and orthophosphate (PO43--P) concentrations in the SBR increased to 983, 56, and 20 mg/L, respectively, the COD removal efficiency was maintained above 85%, the TN removal efficiency was 64.5%, and the PO43--P removal efficiency increased from 78.3% to 97.5%. Partial nitrification with simultaneous accumulation of ammonia (NH4+-N) and nitrite (NO2--N) was observed, which may be related to the effect of high influent load on ammonia- and nitrite-oxidising bacteria. The biological phosphorus removal activity was higher when propionate was used as the carbon source instead of acetate. The relative abundance of glycogen accumulating organisms (GAOs) increased significantly with the increase in organic load, while Tetrasphaera was the consistently dominant polyphosphate accumulating organism (PAO) in the reactor. Under high organic loading conditions, there was no significant PAO-GAO competition in the reactor, thus the phosphorus removal performance was not affected.

| S-EPMC9105176 | biostudies-literature

Effects of influent COD/N ratios on nitrous oxide emission in a sequencing biofilm batch reactor for simultaneous nitrogen and phosphorus removal.

Project description:The characteristics of N2O emissions from an anaerobic/aerobic/anoxic (A/O/A) sequencing biofilm batch reactor (SBBR) were investigated under different influent COD/nitrogen (C/N) ratios (from 1-4). Results indicated that the C/N ratios affected the quantity of polyhydroxybutyrate (PHB) and residual organic substances after the anaerobic period, resulting in the largest N2O emission during aerobic period occurred at a C/N of 2. Moreover, during the anoxic PHB-driven denitrification period, the rapid decline in the dissolved N2O concentration indicated that the nitrite inhibition threshold for N2O reduction increased with the increased C/N ratios, which means the higher influent C/N ratios could lower the inhibition of nitrite on N2O reduction. Finally, more PHB and residual organic substances were provided to denitrification at a high C/N ratio, resulting in less total N2O emission was achieved at a high C/N ratio in the A/O/A SBBR.

| S-EPMC5547147 | biostudies-literature

Efficiency of sequencing batch reactor for removal of organic matter in the effluent of petroleum wastewater.

Project description:The main aim of this research was to study the biodegradation of Methyl Tertiary Butyl Ether (MTBE) using aerobic sequencing batch reactor (SBR) at a pilot-Scale. The reactor was made of a 3 mm-thick glass cylinder with an internal diameter of 12 cm and height of 60 cm. SBR operated in five phases. The first phase was filling the reactor for about 10 min. the second phase was the main reactor for biological treatment of petroleum wastewater about 21.55 h. The third phase was the sedimentation (1 h). The fourth phase was decanting from the reactor for about 10 min. The last phase consisted of idle for about 45 min. The experiments showed that the mixed microbial mass is able to degrade high concentration of methanol up to 250 mg/l, and concentration of MTBE up to 70 mg/l for a 24 h cycle. However, the mixed microbial mass is not able to degrade MTBE with concentration more than 70 mg/l. Microorganisms were generally isolated from Fajr petrochemical wastewater treatment plant. Analysis showed that the mixed microbial mass able to biodegradation of COD up to 1350 mg/l in effluent. Aerobic SBR can be used for biological treatment of the petroleum wastewater containing pollutants such as methanol, MTBE with a promising efficiency.

| S-EPMC6141387 | biostudies-literature

Removal of Nitrogen and Phosphorus from Thickening Effluent of an Urban Wastewater Treatment Plant by an Isolated Green Microalga.

Project description:Microalgae are photosynthetic microorganisms and are considered excellent candidates for a wide range of biotechnological applications, including the removal of nutrients from urban wastewaters, which they can recover and convert into biomass. Microalgae-based systems can be integrated into conventional urban wastewater treatment plants (WW-TP) to improve the water depuration process. However, microalgal strain selection represents a crucial step for effective phytoremediation. In this work, a microalga isolated from the effluent derived from the thickening stage of waste sludge of an urban WW-TP was selected and tested to highlight its potential for nutrient removal. Ammonium and phosphate abatements by microalgae were evaluated using both the effluent and a synthetic medium in a comparative approach. Parallelly, the isolate was characterized in terms of growth capability, morphology, photosynthetic pigment content and photosystem II maximum quantum yield. The isolated microalga showed surprisingly high biomass yield and removal efficiency of both ammonium and phosphate ions from the effluent but not from the synthetic medium. This suggests its clear preference to grow in the effluent, linked to the overall characteristics of this matrix. Moreover, biomass from microalgae cultivated in wastewater was enriched in photosynthetic pigments, polyphosphates, proteins and starch, but not lipids, suggesting its possible use as a biofertilizer.

| S-EPMC7766996 | biostudies-literature

Nitrifying granules cultivation in a sequencing batch reactor at a low organics-to-total nitrogen ratio in wastewater.

Project description:It is possible to cultivate aerobic granular sludge at a low organic loading rate and organics-to-total nitrogen (COD/N) ratio in wastewater in the reactor with typical geometry (height/diameter = 2.1, superficial air velocity = 6 mm/s). The noted nitrification efficiency was very high (99%). At the highest applied ammonia load (0.3 ± 0.002 mg NH (4) (+) -N g total suspended solids (TSS)(-1) day(-1), COD/N = 1), the dominating oxidized form of nitrogen was nitrite. Despite a constant aeration in the reactor, denitrification occurred in the structure of granules. Applied molecular techniques allowed the changes in the ammonia-oxidizing bacteria (AOB) community in granular sludge to be tracked. The major factor influencing AOB number and species composition was ammonia load. At the ammonia load of 0.3 ± 0.002 mg NH (4) (+) -N g TSS(-1) day(-1), a highly diverse AOB community covering bacteria belonging to both the Nitrosospira and Nitrosomonas genera accounted for ca. 40% of the total bacteria in the biomass.

| S-EPMC3131513 | biostudies-literature

Decoding the Role of Extracellular Polymeric Substances in Enhancing Nitrogen Removal from High-Ammonia and Low-C/N Wastewater in a Sequencing Batch Packed-Bed Biofilm Reactor.

Project description:Although the role of extracellular polymeric substances (EPSs) as a viscous high-molecular polymer in biological wastewater treatment has been recognized, in-depth knowledge of how EPSs affect nitrogen removal remains limited in biofilm-based reactors. Herein, we explored EPS characteristics associated with nitrogen removal from high-ammonia (NH4+-N: 300 mg/L) and low carbon-to-nitrogen ratio (C/N: 2-3) wastewater in a sequencing batch packed-bed biofilm reactor (SBPBBR) under four different operating scenarios for a total of 112 cycles. Scanning electron microscopy (SEM), atomic force microscopy (AFM), and Fourier-transform infrared (FTIR) analysis revealed that the distinct physicochemical properties, interface microstructure, and chemical composition of the bio-carrier were conducive to biofilm formation and microbial immobilization and enrichment. Under the optimal conditions (C/N: 3, dissolved oxygen: 1.3 mg/L, and cycle time: 12 h), 88.9% ammonia removal efficiency (ARE) and 81.9% nitrogen removal efficiency (NRE) could be achieved in the SBPBBR. Based on visual and SEM observations of the bio-carriers, biofilm development, biomass concentration, and microbial morphology were closely linked with nitrogen removal performance. Moreover, FTIR and three-dimensional excitation-emission matrix (3D-EEM) spectroscopy demonstrated that tightly bound EPSs (TB-EPSs) play a more important role in maintaining the stability of the biofilm. Significant shifts in the number, intensity, and position of fluorescence peaks of EPSs determined different nitrogen removal. More importantly, the high presence of tryptophan proteins and humic acids might promote advanced nitrogen removal. These findings uncover intrinsic correlations between EPSs and nitrogen removal for better controlling and optimizing biofilm reactors.

| S-EPMC10051956 | biostudies-literature

Sensor-mediated granular sludge reactor for nitrogen removal and reduced aeration demand using a dilute wastewater.

Project description:A sensor-mediated strategy was applied to a laboratory-scale granular sludge reactor (GSR) to demonstrate that energy-efficient inorganic nitrogen removal is possible with a dilute mainstream wastewater. The GSR was fed a dilute wastewater designed to simulate an A-stage mainstream anaerobic treatment process. DO, pH, and ammonia/nitrate sensors measured water quality as part of a real-time control strategy that resulted in low-energy nitrogen removal. At a low COD (0.2 kg m-3 day-1 ) and ammonia (0.1 kg-N m-3 day-1 ) load, the average degree of ammonia oxidation was 86.2 ± 3.2% and total inorganic nitrogen removal was 56.7 ± 2.9% over the entire reactor operation. Aeration was controlled using a DO setpoint, with and without residual ammonia control. Under both strategies, maintaining a low bulk oxygen level (0.5 mg/L) and alternating aerobic/anoxic cycles resulted in a higher level of nitrite accumulation and supported shortcut inorganic nitrogen removal by suppressing nitrite oxidizing bacteria. Furthermore, coupling a DO setpoint aeration strategy with residual ammonia control resulted in more stable nitritation and improved aeration efficiency. The results show that sensor-mediated controls, especially coupled with a DO setpoint and residual ammonia controls, are beneficial for maintaining stable aerobic granular sludge. PRACTITIONER POINTS: Tight sensor-mediated aeration control is need for better PN/A. Low DO intermittent aeration with minimum ammonium residual results in a stable N removal. Low DO aeration results in a stable NOB suppression. Using sensor-mediated aeration control in a granular sludge reactor reduces aeration cost.

| S-EPMC7383604 | biostudies-literature

Nitrogen and phosphorus removal from wastewater treatment plant effluent via bacterial sulfate reduction in an anoxic bioreactor packed with wood and iron.

Project description:We investigated the removal of nitrogen and phosphate from the effluent of a sewage treatment plant over a long-term operation in bioreactors packed with different combinations of wood and iron, with a trickling filter packed with foam ceramics for nitrification. The average nitrification rate in the trickling filter was 0.17 kg N/m3∙day and remained at 0.11 kg N/m3∙day even when the water temperature was below 15 °C. The denitrification and phosphate removal rates in the bioreactor packed with aspen wood and iron were higher than those in the bioreactor packed with cedar chips and iron. The bioreactor packed with aspen wood and iron continued to remove nitrate and phosphate for >1200 days of operation. The nitrate removal activity of a biofilm attached to the aspen wood from the bioreactor after 784 days of operation was 0.42 g NO3-N/kg dry weight wood∙ day. There was no increase in the amount of dissolved organic matter in the outflow from the bioreactors.

| S-EPMC4199053 | biostudies-literature

Spectroscopic characterization of DOM and the nitrogen removal mechanism during wastewater reclamation plant.

Project description:The performance of the Sha-he wastewater reclamation plant was evaluated in this study. To remove residual nitrogen after Anaerobic-Anoxic-Oxic (A2O) treatment, three multistage Anoxic-Oxic (A/O) were added to investigate the nitrogen removal efficiency and its mechanism. In addition, the constituents and evolution of dissolved organic matter (DOM) during wastewater reclamation was also investigated using a method combining fluorescence spectroscopy with fluorescence regional integration (FRI). The results suggested that multistage A/O treatment can effectively improve the nitrogen removal ability under low concentrations of carbon sources. The total nitrogen (TN) exhibits significantly positive correlation with fulvic acid-like materials and humic acid-like materials. The correlation coefficient for TN and fulvic acid-like substances (R2 = 0.810, P < 0.01) removal was greater than that of humic acid-like substances (R2 = 0.636, P < 0.05). The results indicate that nitrogen removal may be achieved with the fulvic-like and humic-like substances, and the removal effects were higher by fulvic acid-like substances than humic-like substances, mostly due to that the latter were relatively more difficult to be utilized as carbon source during the nitrogen removal process. The effluent water quality of biological treatment reached the first grade A standard of "Cities sewage treatment plant pollutant discharge standard" (GB18918-2002). In addition, the effluent from the membrane bioreactor reached the "Standards of reclaimed water quality" (SL368-2006).

| S-EPMC5693440 | biostudies-literature

Biological nitrogen removal from low carbon wastewater

Project description:Nitrogen has traditionally been removed from wastewater by nitrification and denitrification processes, in which organic carbon has been used as an electron donor during denitrification. However, some wastewaters contain low concentrations of organic carbon, which may require external organic carbon supply, increasing treatment costs. As a result, processes such as partial nitrification/anammox (anaerobic ammonium oxidation) (PN/A), autotrophic denitrification, nitritation-denitritation and bioelectrochemical processes have been studied as possible alternatives, and are thus evaluated in this study based on process kinetics, applicability at large-scale and process configuration. Oxygen demand for nitritation-denitritation and PN/A is 25% and 60% lower than for nitrification/denitrification, respectively. In addition, PN/A process does not require organic carbon supply, while its supply for nitritation-denitritation is 40% less than for nitrification/denitrification. Both PN/A and nitritation-denitritation produce less sludge compared to nitrification/denitrification, which saves on sludge handling costs. Similarly, autotrophic denitrification generates less sludge compared to heterotrophic denitrification and could save on sludge handling costs. However, autotrophic denitrification driven by metallic ions, elemental sulfur (S) and its compounds could generate harmful chemicals. On the other hand, hydrogenotrophic denitrification can remove nitrogen completely without generation of harmful chemicals, but requires specialized equipment for generation and handling of hydrogen gas (H2), which complicates process configuration. Bioelectrochemical processes are limited by low kinetics and complicated process configuration. In sum, anammox-mediated processes represent the best alternative to nitrification/denitrification for nitrogen removal in low- and high-strength wastewaters.

| S-EPMC9709150 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data