Dataset Information

Effect of Almond Shell Waste on Physicochemical Properties of Polyester-Based Biocomposites.

ABSTRACT: Polyester-based biocomposites containing INZEA F2® biopolymer and almond shell powder (ASP) at 10 and 25 wt % contents with and without two different compatibilizers, maleinized linseed oil and Joncryl ADR 4400®, were prepared by melt blending in an extruder, followed by injection molding. The effect of fine (125-250 m) and coarse (500-1000 m) milling sizes of ASP was also evaluated. An improvement in elastic modulus was observed with the addition of< both fine and coarse ASP at 25 wt %. The addition of maleinized linseed oil and Joncryl ADR 4400 produced some compatibilizing effect at low filler contents while biocomposites with a higher amount of ASP still presented some gaps at the interface by field emission scanning electron microscopy. Some decrease in thermal stability was shown which was related to the relatively low thermal stability and disintegration of the lignocellulosic filler. The added modifiers provided some enhanced thermal resistance to the final biocomposites. Thermal analysis by differential scanning calorimetry and thermogravimetric analysis suggested the presence of two different polyesters in the polymer matrix, with one of them showing full disintegration after 28 and 90 days for biocomposites containing 25 and 10 wt %, respectively, under composting conditions. The developed biocomposites have been shown to be potential polyester-based matrices for use as compostable materials at high filler contents.

SUBMITTER: Ramos M

PROVIDER: S-EPMC7240503 | biostudies-literature | 2020 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Effect of Almond Shell Waste on Physicochemical Properties of Polyester-Based Biocomposites.

Ramos Marina M Dominici Franco F Luzi Francesca F Jiménez Alfonso A Garrigós Maria Carmen MC Torre Luigi L Puglia Debora D

Polymers 20200406 4

Polyester-based biocomposites containing INZEA F2<sup>®</sup> biopolymer and almond shell powder (ASP) at 10 and 25 wt % contents with and without two different compatibilizers, maleinized linseed oil and Joncryl ADR 4400<sup>®</sup>, were prepared by melt blending in an extruder, followed by injection molding. The effect of fine (125-250 m) and coarse (500-1000 m) milling sizes of ASP was also evaluated. An improvement in elastic modulus was observed with the addition of< both fine and coarse A ...[more]

PMID: 32268549

Similar Datasets

Project description:Polydimethylsiloxane (PDMS)-based levonorgestrel intrauterine systems (LNG-IUSs) such as Mirena® are long-acting drug-device combination products designed to release LNG for contraceptive purposes up to 6 years. LNG-IUSs consist of a hollow cylindrical drug-PDMS reservoir mounted with a polyethylene frame and covered by an outer PDMS membrane. PDMS is the release-controlling excipient present in both the matrix and the outer membrane. The degree of PDMS crosslinking is a key parameter in LNG-IUS manufacturing, dictating the elasticity and mechanical strength (which are critical parameters in molding and demolding of the cylindrical reservoirs). In addition, elasticity and mechanical strength are also important to prevent deformation during insertion into the uterine cavity. The objectives of this study were to investigate the impact of PDMS crosslinking on the physicochemical properties of LNG-IUSs and to develop appropriate testing methods for characterization of their mechanical strength. Formulations with different degrees of crosslinking were prepared by varying the ratio of the PDMS elastomer base and the crosslinking agent. A novel solvent swelling and extraction method was developed to determine the degree of PDMS crosslinking. The extent of crosslinking was also characterized via FTIR, Raman, 1H NMR, DSC, TGA and dynamic mechanical analysis. As expected, formulations with higher degrees of crosslinking showed lower crystallinity. Interestingly, the less crystalline formulations showed higher Tg values and storage moduli compared to the high crystalline formulations, implying that crosslinking is the predominant parameter governing the physicochemical and mechanical properties in LNG-IUSs. Correlations were established between PDMS crosslinking and the physicochemical properties of LNG-IUSs which will be useful for quality control purposes during formulation screening and development. A better understanding of the physicochemical characteristics of these complex products will facilitate drug product development.

Project description:To obtain a comprehensive understanding of the qualitative and quantitative effects of the intrinsic properties of biomass on its pyrolysis characteristics and assess the behavior of agroforestry waste, thermogravimetric analyses of three representative agroforestry wastes, namely rape (Brassica campestris L.) straw (RS), apple (Malus domestica) tree branches (ATB), and pine (Pinus sp.) sawdust (PS), were carried out by pyrolysis under dynamic conditions (30 to 900 °C) at different heating rates of 5, 10, and 15 °C·min−1. Correlation analysis showed that intrinsic physicochemical properties play distinct roles in different stages of pyrolysis. The ash content was negatively correlated with the temperature range (R2) of the second stage (190–380 °C) of pyrolysis. The lignin content and the amount of pyrolysis residues (RSS) were positively correlated. Kinetic triplets, including the activation energy (Ea), pre-exponential factor (A), and reaction model [f(α)], were obtained using different methods, including the Flynn–Wall–Ozawa (FWO), Freidman, Kissinger–Akahira–Sunose (KAS), and Starink methods. The mean activation energy (Ea[mean]) for RS, ATB, and PS calculated by the different methods ranged from 167.15 to 195.58 kJ·mol−1, 195.37 to 234.95 kJ·mol−1, and 191.27–236.45 kJ·mol−1, respectively. Correlation analysis of the intrinsic physicochemical characteristics and kinetic factors of agroforestry waste showed that the minimum Ea (Ea[min]) was significantly positively correlated with heat capacity (C0) and negatively correlated with thermal diffusivity (D). The Ea[mean] and the maximum value of Ea (Ea[max]) significantly positively correlated with the sum content of cellulose and lignin, indicating that the contents of cellulose and lignin determines the energy required for the pyrolysis process of agroforestry waste. The mechanism of degradation involves the diffusion model (D1, D2, and D3), the growth model (A4), and the geometrical contraction model (R3). These results indicate that the pyrolysis of agroforestry waste is a complex process due to the heterogeneity of its intrinsic physicochemical properties.

Project description:Carbon nanomaterials have shown great potential in several fields, including biosensing, bioimaging, drug delivery, energy, catalysis, diagnostics, and nanomedicine. Recently, a new class of carbon nanomaterials, carbon dots (CDs), have attracted much attention due to their easy and inexpensive synthesis from a wide range of precursors and fascinating physical, chemical, and biological properties. In this work we have developed CDs derived from olive solid wastes of two Mediterranean regions, Puglia (CDs_P) and Calabria (CDs_C) and evaluated them in terms of their physicochemical properties and antibacterial activity against Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa). Results show the nanosystems have a quasi-spherical shape of 12-18 nm in size for CDs_P and 15-20 nm in size for CDs_C. UV-Vis characterization indicates a broad absorption band with two main peaks at about 270 nm and 300 nm, respectively, attributed to the π-π* and n-π* transitions of the CDs, respectively. Both samples show photoluminescence (PL) spectra excitation-dependent with a maximum at λem = 420 nm (λexc = 300 nm) for CDs_P and a red-shifted at λem = 445 nm (λexc = 300 nm) for CDs_C. Band gaps values of ≈ 1.48 eV for CDs_P and ≈ 1.53 eV for CDs_C are in agreement with semiconductor behaviour. ζ potential measures show very negative values for CDs_C compared to CDs_P (three times higher, -38 mV vs. -18 mV at pH = 7). The evaluation of the antibacterial properties highlights that both CDs have higher antibacterial activity towards Gram-positive than to Gram-negative bacteria. In addition, CDs_C exhibit bactericidal behaviour at concentrations of 360, 240, and 120 µg/mL, while lesser activity was found for CDs_P (bacterial cell reduction of only 30% at the highest concentration of 360 µg/mL). This finding was correlated to the higher surface charge of CDs_C compared to CDs_P. Further investigations are in progress to confirm this hypothesis and to gain insight on the antibacterial mechanism of both cultivars.

Project description:Lipid-shelled microbubbles have been used in ultrasound-mediated drug delivery. The physicochemical properties of the microbubble shell could affect the delivery efficiency since they determine the microbubble mechanical properties, circulation persistence, and dissolution behavior during cavitation. Therefore, the aim of this study was to investigate the shell effects on drug delivery efficiency in the brain via blood-brain barrier (BBB) opening in vivo using monodisperse microbubbles with different phospholipid shell components. The physicochemical properties of the monolayer were varied by using phospholipids with different hydrophobic chain lengths (C16, C18, and C24). The dependence on the molecular size and acoustic energy (both pressure and pulse length) were investigated. Our results showed that a relatively small increase in the microbubble shell rigidity resulted in a significant increase in the delivery of 40-kDa dextran, especially at higher pressures. Smaller (3kDa) dextran did not show significant difference in the delivery amount, suggesting that the observed shell effect was molecular size-dependent. In studying the impact of acoustic energy on the shell effects, it was found that they occurred most significantly at pressures causing microbubble destruction (450kPa and 600kPa); by increasing the pulse length to deliver the 40-kDa dextran, the difference between C16 and C18 disappeared while C24 still achieved the highest delivery efficiency. These indicated that the acoustic energy could be used to modulate the shell effects. The acoustic cavitation emission revealed the physical mechanisms associated with different shells. Overall, lipid-shelled microbubbles with long hydrophobic chain length could achieve high delivery efficiency for larger molecules especially with high acoustic energy. Our study, for the first time, offered evidence directly linking the microbubble monolayer shell with their efficacy for drug delivery in vivo.

Dataset Information

Effect of Almond Shell Waste on Physicochemical Properties of Polyester-Based Biocomposites.

Publications

Effect of Almond Shell Waste on Physicochemical Properties of Polyester-Based Biocomposites.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets