Dataset Information

Assessment of Drain Water Used for Irrigation in the Delhi Region.

ABSTRACT: Background:Industries such as electroplating, mining and battery production are major sources of heavy metal-rich waste entering nearby water bodies. Irrigation with heavy metal contaminated water can deteriorate soil quality as well as agricultural produce and have further toxic effects on human health. Objectives:The objective of the present study was to estimate the concentration of hazardous heavy metals such as chromium (Cr), cadmium (Cd), copper (Cu), nickel (Ni), zinc (Zn) and lead (Pb), as well as physico-chemical variables (pH, electrical conductivity, total dissolved solids, chemical oxygen demand and dissolved oxygen) at sampling locations along the Najafgarh and Loha mandi drains in Delhi, National Capital Region, India. Methods:The present study evaluated the quality of wastewater from the Najafgarh and Loha mandi drains, which are used for irrigational purposes in the Delhi region. Drain water quality was monitored for a period of 2 years for physico-chemical variables (pH, chemical oxygen demand, electrical conductivity and dissolved oxygen) as well as heavy metal concentrations (Cr, Cu, Cd, Zn, Ni and Pb). The two-year monitoring period (July 2012-March 2014) was chosen to represent three seasons: pre-monsoon, monsoon, and post-monsoon. Results:Varied concentrations of multiple heavy metals were found due to the extensive discharge of untreated industrial effluents into the drain water. Punjabi Bagh of Najafgarh drain was the most contaminated sampling site with the maximum concentration of Zn (12.040 ± 0.361 mg L-1), followed by Cr (2.436 ± 0.073mg L-1) and Cu (2.617 ± 0.078 mg L-1). Conclusions:Consumption of heavy metal-contaminated agricultural products can cause deleterious human health effects, leading to further health problems. The presence of multi-heavy metal ions above the Food and Agriculture Organization of the United Nations (FAO) permissible limits indicated that drain water was not suitable for irrigational purposes, and adequate measures are required to remove the heavy metal load from drain water. Competing Interests:The authors declare no competing financial interests.

SUBMITTER: Gola D

PROVIDER: S-EPMC7269328 | biostudies-literature | 2020 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Assessment of Drain Water Used for Irrigation in the Delhi Region.

Gola Deepak D Bhattacharya Arghya A Dey Priyadarshini P Malik Anushree A Ahammad Shaikh Ziauddin SZ

Journal of health & pollution 20200528 26

<h4>Background</h4>Industries such as electroplating, mining and battery production are major sources of heavy metal-rich waste entering nearby water bodies. Irrigation with heavy metal contaminated water can deteriorate soil quality as well as agricultural produce and have further toxic effects on human health.<h4>Objectives</h4>The objective of the present study was to estimate the concentration of hazardous heavy metals such as chromium (Cr), cadmium (Cd), copper (Cu), nickel (Ni), zinc (Zn) ...[more]

PMID: 32509411

Similar Datasets

Project description:Water is a vital, finite resource whose quantity and quality are deteriorating as the world population increases. The current study aims to investigate the concentration of heavy metals (HM) in surface water for irrigation purposes with associated human health risks and pollution sources near the marble industry in Malakand, Pakistan. Twenty-seven water samples were randomly collected and analyzed for HM concentration by inductively coupled plasma‒optical emission spectrometry (ICP‒OES). pH, electrical conductivity (EC), total dissolved solids (TDS), biological oxygen demand (BOD), and chemical oxygen demand (COD) were measured using standard methods of American Public Health Association (APHA). Irrigation suitability was assessed using specific water quality parameters. The associated health risks from ingestion and dermal exposure to heavy metals were calculated by USEPA health risk indices. Pollution sources and spatial distribution mapping were studied using compositional data analysis (CoDa) and the application of a geographic information system (GIS) to understand the changing behavior of heavy metals in surface waters. The concentrations of BOD (89%), COD (89%), Al (89%), Ca (89%), Cr (56%), Cu (78%), Fe (56%), K (34%) Mg (23%), Mn (56%), Na (89%), Ni (56%), P (89%), and Zn (11%) exceeded the safety limits of National Environmental Quality standards (NEQs) of Pakistan. The results of Kelly's ratio (KR) classified surface water as unsuitable for irrigation. The average daily doses (ADD, mg/kg/day) for Al, Cu, Cr, Fe, Mn, Ni, and Zn were higher in children than in adults. The hazard index (HI) for children and adults was above the threshold (HI > 1), indicating a significant risk of non-carcinogenic toxicity. The carcinogenic risk values for Cr and Ni were above the USEPA limit (1 × 10-6 to 1 × 10-4), suggesting a potential carcinogenic risk for the target population. Principal component analysis (PCA), biplot (CLR), and the CoDa-dendrogram allowed for the identification of elemental associations, and their potential source was anthropogenic rather than natural in origin. Regular monitoring and phytoremediation strategies are proposed to safeguard crops and human health.

Project description:An experimental slow sand filter (SSF) was constructed to study the spatial and temporal structure of a bacterial community suppressive to an oomycete plant pathogen, Phytophthora cryptogea. Passage of water through the mature sand column resulted in complete removal of zoospores of the plant pathogen. To monitor global changes in the microbial community, bacterial and fungal numbers were estimated on selective media, direct viable counts of fungal spores were made, and the ATP content was measured. PCR amplification of 16S rRNA genes and denaturing gradient gel electrophoresis (DGGE) were used to study the dynamics of the bacterial community in detail. The top layer (1 cm) of the SSF column was dominated by a variable and active microbial population, whereas the middle (50 cm) and bottom (80 cm) layers were dominated by less active and diverse bacterial populations. The major changes in the microbial populations occurred during the first week of filter operation, and these populations then remained to the end of the study. Spatial and temporal nonlinear mapping of the DGGE bands provided a useful visual representation of the similarities between SSF samples. According to the DGGE profile, less than 2% of the dominating bands present in the SSF column were represented in the culturable population. Sequence analysis of DGGE bands from all depths of the SSF column indicated that a range of bacteria were present, with 16S rRNA gene sequences similar to groups such as Bacillus megaterium, Cytophaga, Desulfovibrio, Legionella, Rhodococcus rhodochrous, Sphingomonas, and an uncharacterized environmental clone. This study describes the characterization of the performance, and microbial composition, of SSFs used for the treatment of water for use in the horticultural industry. Utilization of naturally suppressive population of microorganisms either directly or by manipulation of the environment in an SSF may provide a more reproducible control method for the future.

Dataset Information

Assessment of Drain Water Used for Irrigation in the Delhi Region.

Publications

Assessment of Drain Water Used for Irrigation in the Delhi Region.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets