Dataset Information

Unveiling Fabrication and Environmental Remediation of MXene-Based Nanoarchitectures in Toxic Metals Removal from Wastewater: Strategy and Mechanism.

ABSTRACT: Efficient approaches for toxic metal removal from wastewater have had transformative impacts to mitigating freshwater scarcity. Adsorption is among the most promising purification techniques due to its simplicity, low cost, and high removal efficiency at ambient conditions. MXene-based nanoarchitectures emerged as promising adsorbents in a plethora of toxic metal removal applications. This was due to the unique hydrophilicity, high surface area, activated metallic hydroxide sites, electron-richness, and massive adsorption capacity of MXene. Given the continual progress in the rational design of MXene nanostructures for water treatment, timely updates on this field are required that deeply emphasize toxic metal removal, including fabrication routes and characterization strategies of the merits, advantages, and limitations of MXenes for the adsorption of toxic metals (i.e., Pb, Cu, Zn, and Cr). This is in addition to the fundamentals and the adsorption mechanism tailored by the shape and composition of MXene based on some representative paradigms. Finally, the limitations of MXenes and their potential future research perspectives for wastewater treatment are also discussed. This review may trigger scientists to develop novel MXene-based nanoarchitectures with well-defined shapes, compositions, and physiochemical merits for efficient, practical removal of toxic metals from wastewater.

SUBMITTER: Ibrahim Y

PROVIDER: S-EPMC7279406 | biostudies-literature | 2020 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Unveiling Fabrication and Environmental Remediation of MXene-Based Nanoarchitectures in Toxic Metals Removal from Wastewater: Strategy and Mechanism.

Ibrahim Yassmin Y Kassab Amal A Eid Kamel K M Abdullah Aboubakr A Ozoemena Kenneth I KI Elzatahry Ahmed A

Nanomaterials (Basel, Switzerland) 20200504 5

Efficient approaches for toxic metal removal from wastewater have had transformative impacts to mitigating freshwater scarcity. Adsorption is among the most promising purification techniques due to its simplicity, low cost, and high removal efficiency at ambient conditions. MXene-based nanoarchitectures emerged as promising adsorbents in a plethora of toxic metal removal applications. This was due to the unique hydrophilicity, high surface area, activated metallic hydroxide sites, electron-richn ...[more]

PMID: 32375362

Similar Datasets

Project description:Spherical shaped nano-size aluminium oxide and its hybrids with indole and indole derivatives have been synthesized using sol-gel and post grafting methods coupled with sonication (Branson Digital SonifierS-250D; 20 kHz; 40%) for the remediation of toxic metals (lead and mercury). Different spectroscopic techniques (FTIR, SEM, BET, XRD, and XPS) have been applied to assess the properties of synthesized aluminium oxide and its hybrids. FTIR spectra showed the absorption bands of aluminium oxide (Al-O-Al) and aluminium hybrids (Al-O-C) at 800-400 cm-1 and 1650-1100 cm-1 region, respectively. SEM showed spherical shaped clusters of aluminium oxide which changed into the net-shape structure after the hybrid synthesis. It is worth noting that sonication energy increases the total surface area of aluminium oxide when it gets hybridized with indole and its derivatives from 82 m2/g to 167 m2/g; it also improved the product yield from 68% to 78%. Simultaneously, FTIR, SEM and BET analysis of non-sonicated aluminium oxide and its hybrids were also recorded for comparison. While XRD and XPS analysis were only conducted for sonicated aluminium oxide and its hybrids to manifest the structural and compositional properties. XRD patterns indexed as the cubic crystal system with an average 41 nm crystallite size of sonicated aluminium oxide which remains unaffected after hybrid synthesis. A survey scan under XPS confirmed the presence of all expected elements (aluminium, oxygen, carbon, nitrogen) and deconvolution of each recorded peak showed binding of element with its neighboring elements. The performance of aluminium oxide and its hybrids synthesize with and without sonication are also evaluated using a time-dependent batch adsorption protocol optimize for one hour. The maximum adsorption of lead (37%) and mercury (40%) are found onto sonicated aluminium oxide. The sonicated aluminium hybrids showed 43-63% of lead and 55-67% of mercury at pH 7. The fitness of experimental data using adsorption kinetics and isotherms revealed that adsorption follows Pseudo-second-order kinetic, Langmuir, and Freundlich isotherms.

Project description:According to the World Health Organization, more than two billion people in our world use drinking water sources which are not free from pathogens and heavy metal contamination. Unsafe drinking water is responsible for the death of several millions in the 21st century. To find facile and cost-effective routes for developing multifunctional materials, which has the capability to resolve many of the challenges associated with drinking water problem, here, we report the novel design of multifunctional fluorescence-magnetic biochar with the capability for highly efficient separation, identification, and removal of pathogenic superbugs and toxic metals from environmental water samples. Details of synthesis and characterization of multifunctional biochar that exhibits very good magnetic properties and emits bright blue light owing to the quantum confinement effect are reported. In our design, biochar, a carbon-rich low-cost byproduct of naturally abundant biomass, which exhibits heterogeneous surface chemistry and strong binding affinity via oxygen-containing group on the surface, has been used to capture pathogens and toxic metals. Biochar dots (BCDs) of an average of 4 nm size with very bright photoluminescence have been developed for the identification of pathogens and toxic metals. In the current design, magnetic nanoparticles have been incorporated with BCDs which allow pathogens and toxic metals to be completely removed from water after separation by an external magnetic field. Reported results show that owing to the formation of strong complex between multifunctional biochar and cobalt(II), multifunctional biochar can be used for the selective capture and removal of Co(II) from environmental samples. Experimental data demonstrate that multifunctional biochar can be used for the highly efficient removal of methicillin-resistant Staphylococcus aureus (MRSA) from environmental samples. Reported results also show that melittin, an antimicrobial peptide-attached multifunctional biochar, has the capability to completely disinfect MRSA superbugs after magnetic separation. A possible mechanism for the selective separation of Co(II), as well as separation and killing of MRSA, has been discussed.

Dataset Information

Unveiling Fabrication and Environmental Remediation of MXene-Based Nanoarchitectures in Toxic Metals Removal from Wastewater: Strategy and Mechanism.

Publications

Unveiling Fabrication and Environmental Remediation of MXene-Based Nanoarchitectures in Toxic Metals Removal from Wastewater: Strategy and Mechanism.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets