Browse
Submit Data
Databases
API
Help

Dataset Information

19 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Full Spectrum Raman Excitation Mapping Spectroscopy.

ABSTRACT: A generalization of the Raman scattering (RS) spectrum, the Raman excitation map (REM) is a hyperspectral two-dimensional (2D) data set encoding vibrational spectra, electronic spectra and their coupling. Despite the great potential of REM for optical sensing and characterization with remarkable sensitivity and selectivity, the difficulty of obtaining maps and the length of time required to acquire them has been practically limiting. Here we show, with a simple setup using current optical equipment, that maps can be obtained much more rapidly than before (~ms to ~100?s now vs. ~1000?s to hours before) over a broad excitation range (here ~100?nm is demonstrated, with larger ranges straightforward to obtain), thus taking better advantage of scattering resonance. We obtain maps from different forms of carbon: graphite, graphene, purified single walled carbon nanotubes (SWCNTs) and chirality enriched SWCNTs. The relative speed and simplicity of the technique make REM a practical and sensitive tool for chemical analysis and materials characterization.

SUBMITTER: Finnie P

PROVIDER: S-EPMC7280200 | biostudies-literature | 2020 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Full Spectrum Raman Excitation Mapping Spectroscopy.

Finnie Paul P Ouyang Jianying J Lefebvre Jacques J

Scientific reports 20200608 1

A generalization of the Raman scattering (RS) spectrum, the Raman excitation map (REM) is a hyperspectral two-dimensional (2D) data set encoding vibrational spectra, electronic spectra and their coupling. Despite the great potential of REM for optical sensing and characterization with remarkable sensitivity and selectivity, the difficulty of obtaining maps and the length of time required to acquire them has been practically limiting. Here we show, with a simple setup using current optical equipm ...[more]

PMID: 32514090

Similar Datasets

Excitation energy dependent Raman spectrum of MoSe2.

Project description:Raman investigation of MoSe2 was carried out with eight different excitation energies. Seven peaks, including E1g, A1g, E2g(1), and A2u(2) peaks are observed in the range of 100-400 cm(-1). The phonon modes are assigned by comparing the peak positions with theoretical calculations. The intensities of the peaks are enhanced at different excitation energies through resonance with different optical transitions. The A1g mode is enhanced at 1.58 and 3.82 eV, which are near the A exciton energy and the band-to-band transition between higher energy bands, respectively. The E2g(1) mode is strongly enhanced with respect to the A1g mode for the 2.71- and 2.81-eV excitations, which are close to the C exciton energy. The different enhancements of the A1g and E2g(1) modes are explained in terms of the symmetries of the exciton states and the exciton-phonon coupling. Other smaller peaks including E1g and A2u(2) are forbidden but appear due to the resonance effect near optical transition energies.

| S-EPMC4658525 | biostudies-other

Dual excitation wavelength system for combined fingerprint and high wavenumber Raman spectroscopy.

Project description:A fiber optic probe-based Raman spectroscopy system using a single laser module with two excitation wavelengths, at 680 and 785 nm, has been developed for measuring the fingerprint and high wavenumber regions using a single detector. This system is simpler and less expensive than previously reported configurations of combined fingerprint and high wavenumber Raman systems, and its probe-based implementation facilitates numerous in vivo applications. The high wavenumber region of the Raman spectrum ranges from 2800-3800 cm-1 and contains valuable information corresponding to the molecular vibrations of proteins, lipids, and water, which is complimentary to the biochemical signatures found in the fingerprint region (800-1800 cm-1), which probes DNA, lipids, and proteins. The efficacy of the system is demonstrated by tracking changes in water content in tissue-mimicking phantoms, where Voigtian decomposition of the high wavenumber water peak revealed a correlation between the water content and type of water-tissue interactions in the samples. This dual wavelength system was then used for in vivo assessment of cervical remodeling during mouse pregnancy, a physiologic process with known changes in tissue hydration. The system shows that Raman spectroscopy is sensitive to changes in collagen content in the fingerprint region and hydration state in the high wavenumber region, which was verified using an ex vivo comparison of wet and dry weight. Simultaneous fingerprint and high wavenumber Raman spectroscopy will allow precise in vivo quantification of tissue water content in the high wavenumber region, paired with the high biochemical specificity of the fingerprint region.

| S-EPMC6295447 | biostudies-literature

High resolution Raman spectroscopy mapping of stem cell micropatterns.

Project description:We report on the use of high resolution Raman spectroscopy mapping combined with a micro-engineered stem cell platform. This technique obtains quantitative information about the concentration of individual intracellular molecules such as proteins, lipids, and other metabolites, while tightly controlling cell shape and adhesion. This new quantitative analysis will prove highly relevant for in vitro drug screening applications and regenerative medicine.

| S-EPMC5407440 | biostudies-literature

High spectral specificity of local chemical components characterization with multichannel shift-excitation Raman spectroscopy.

Project description:Raman spectroscopy has emerged as a promising tool for its noninvasive and nondestructive characterization of local chemical structures. However, spectrally overlapping components prevent the specific identification of hyperfine molecular information of different substances, because of limitations in the spectral resolving power. The challenge is to find a way of preserving scattered photons and retrieving hidden/buried Raman signatures to take full advantage of its chemical specificity. Here, we demonstrate a multichannel acquisition framework based on shift-excitation and slit-modulation, followed by mathematical post-processing, which enables a significant improvement in the spectral specificity of Raman characterization. The present technique, termed shift-excitation blind super-resolution Raman spectroscopy (SEBSR), uses multiple degraded spectra to beat the dispersion-loss trade-off and facilitate high-resolution applications. It overcomes a fundamental problem that has previously plagued high-resolution Raman spectroscopy: fine spectral resolution requires large dispersion, which is accompanied by extreme optical loss. Applicability is demonstrated by the perfect recovery of fine structure of the C-Cl bending mode as well as the clear discrimination of different polymorphs of mannitol. Due to its enhanced discrimination capability, this method offers a feasible route at encouraging a broader range of applications in analytical chemistry, materials and biomedicine.

| S-EPMC4563569 | biostudies-literature

Parallelized shifted-excitation Raman difference spectroscopy for fluorescence rejection in a temporary varying system.

Project description:A fluorescence background is one of the common interference factors of the Raman spectroscopic analysis in the biology field. Shifted-excitation Raman difference spectroscopy (SERDS), in which a slow (typically 1?Hz) modulation to excitation wavelength is coupled with a sequential acquisition of alternating shifted-excitation spectra, has been used to separate Raman scattering from excitation-shift insensitive background. This sequential method is susceptible to spectral change and thus is limited only to stable samples. We incorporated a fast laser modulation (200?Hz) and a mechanical streak camera into SERDS to effectively parallelize the SERDS measurement in a single exposure. The developed system expands the scope of SERDS to include temporary varying system. The proof of concept is demonstrated using highly fluorescent samples, including living algae. Quantitative performance in fluorescence rejection and the robustness of the method to the dynamic spectral change during the measurement are manifested.

| S-EPMC7065630 | biostudies-literature

Mapping blood biochemistry by Raman spectroscopy at the cellular level.

Project description:We report how Raman difference imaging provides insight on cellular biochemistry in vivo as a function of sub-cellular dimensions and the cellular environment. We show that this approach offers a sensitive diagnostic to address blood biochemistry at the cellular level. We examine Raman microscopic images of the distribution of the different hemoglobins in both healthy (discocyte) and unhealthy (echinocyte) blood cells and interpret these images using pre-calculated, accurate pre-resonant Raman tensors for scattering intensities specific to hemoglobins. These tensors are developed from theoretical calculations of models of the oxy, deoxy and met forms of heme benchmarked against the experimental visible spectra of the corresponding hemoglobins. The calculations also enable assignments of the electronic transitions responsible for the colour of blood: these are mainly ligand to metal charge transfer transitions.

| S-EPMC8694331 | biostudies-literature

Strain Mapping and Raman Spectroscopy of Bent GaP and GaAs Nanowires.

Project description:Strain engineering of nanowires (NWs) has been recognized as a powerful strategy for tuning the optical and electronic properties of nanoscale semiconductors. Therefore, the characterization of the strains with nanometer-scale spatial resolution is of great importance for various promising applications. In the present work, we synthesized single-crystalline zinc blende phase GaP and GaAs NWs using the chemical vapor transport method and visualized their bending strains (up to 3%) with high precision using the nanobeam electron diffraction technique. The strain mapping at all crystallographic axes revealed that (i) maximum strain exists along the growth direction ([111]) with the tensile and compressive strains at the outer and inner parts, respectively; (ii) the opposite strains appeared along the perpendicular direction ([2̅11]); and (iii) the tensile strain was larger than the coexisting compressive strain at all axes. The Raman spectrum collected for individual bent NWs showed the peak broadening and red shift of the transverse optical modes that were well-correlated with the strain maps. These results are consistent with the larger mechanical modulus of GaP than that of GaAs. Our work provides new insight into the bending strain of III-V semiconductors, which is of paramount importance in the performance of flexible or bendable electronics.

| S-EPMC6641494 | biostudies-literature

Surface-enhanced Raman spectroscopy based quantitative bioassay on aptamer-functionalized nanopillars using large-area Raman mapping.

Project description:Surface-enhanced Raman spectroscopy (SERS) has been used in a variety of biological applications due to its high sensitivity and specificity. Here, we report a SERS-based biosensing approach for quantitative detection of biomolecules. A SERS substrate bearing gold-decorated silicon nanopillars is functionalized with aptamers for sensitive and specific detection of target molecules. In this study, TAMRA-labeled vasopressin molecules in the picomolar regime (1 pM to 1 nM) are specifically captured by aptamers on the nanostructured SERS substrate and monitored by using an automated SERS signal mapping technique. From the experimental results, we show concentration-dependent SERS responses in the picomolar range by integrating SERS signal intensities over a scanning area. It is also noted that our signal mapping approach significantly improves statistical reproducibility and accounts for spot-to-spot variation in conventional SERS quantification. Furthermore, we have developed an analytical model capable of predicting experimental intensity distributions on the substrates for reliable quantification of biomolecules. Lastly, we have calculated the minimum needed area of Raman mapping for efficient and reliable analysis of each measurement. Combining our SERS mapping analysis with an aptamer-functionalized nanopillar substrate is found to be extremely efficient for detection of low-abundance biomolecules.

| S-EPMC3915935 | biostudies-literature

Tunable excitation source for coherent Raman spectroscopy based on a single fiber laser.

Project description:We demonstrate a wavelength tunable optical excitation source for coherent Raman scattering (CRS) spectroscopy based on a single femtosecond fiber laser. Electrically controlled wavelength tuning of Stokes optical pulses was achieved with soliton self frequency shift in an optical fiber, and linear frequency chirping was applied to both the pump and the Stokes waves to significantly improve the spectral resolution. The coherent anti-Stokes Raman scattering (CARS) spectrum of cyclohexane was measured and vibrational resonant Raman peaks separated by 70 cm(-1) were clearly resolved. Single laser-based tunable excitation may greatly simplify CRS measurements and extend the practicality of CRS microscopy.

| S-EPMC3223507 | biostudies-other

New methodology to process shifted excitation Raman difference spectroscopy data: a case study of pollen classification.

Project description:Shifted excitation Raman difference spectroscopy (SERDS) is a background correction method for Raman spectroscopy. Here, the difference spectra were directly used as input for SERDS-based classification after an optimization procedure to correct for photobleaching of the autofluorescence. Further processing included a principal component analysis to compensate for the reduced signal to noise ratio of the difference spectra and subsequent classification by linear discriminant analysis. As a case study 6,028 Raman spectra of single pollen originating from plants of eight different genera and four different growth habits were automatically recorded at excitation wavelengths 784 and 786 nm using a high-throughput screening Raman system. Different pollen were distinguished according to their growth habit, i.e. tree versus non-tree with an accuracy of 95.9%. Furthermore, all pollen were separated according to their genus, providing also insight into similarities based on their families. Classification results were compared using spectra reconstructed from the differences and raw spectra after state-of-art baseline correction as input. Similar sensitivities, specificities, accuracies and precisions were found for all spectra with moderately background. Advantages of SERDS are expected in scenarios where Raman spectra are affected by variations due to detector etaloning, ambient light, and high background.

| S-EPMC7343813 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data