Effect of extended use N95 respirators and eye protection on personal protective equipment (PPE) utilization during SARS-CoV-2 outbreak in Singapore.
Ontology highlight
ABSTRACT:
SUBMITTER: Tan GSE
PROVIDER: S-EPMC7294768 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:ObjectiveThe coronavirus disease 2019 (COVID-19) pandemic has resulted in shortages of personal protective equipment (PPE), underscoring the urgent need for simple, efficient, and inexpensive methods to decontaminate masks and respirators exposed to severe acute respiratory coronavirus virus 2 (SARS-CoV-2). We hypothesized that methylene blue (MB) photochemical treatment, which has various clinical applications, could decontaminate PPE contaminated with coronavirus.DesignThe 2 arms of the study included (1) PPE inoculation with coronaviruses followed by MB with light (MBL) decontamination treatment and (2) PPE treatment with MBL for 5 cycles of decontamination to determine maintenance of PPE performance.MethodsMBL treatment was used to inactivate coronaviruses on 3 N95 filtering facepiece respirator (FFR) and 2 medical mask models. We inoculated FFR and medical mask materials with 3 coronaviruses, including SARS-CoV-2, and we treated them with 10 µM MB and exposed them to 50,000 lux of white light or 12,500 lux of red light for 30 minutes. In parallel, integrity was assessed after 5 cycles of decontamination using multiple US and international test methods, and the process was compared with the FDA-authorized vaporized hydrogen peroxide plus ozone (VHP+O3) decontamination method.ResultsOverall, MBL robustly and consistently inactivated all 3 coronaviruses with 99.8% to >99.9% virus inactivation across all FFRs and medical masks tested. FFR and medical mask integrity was maintained after 5 cycles of MBL treatment, whereas 1 FFR model failed after 5 cycles of VHP+O3.ConclusionsMBL treatment decontaminated respirators and masks by inactivating 3 tested coronaviruses without compromising integrity through 5 cycles of decontamination. MBL decontamination is effective, is low cost, and does not require specialized equipment, making it applicable in low- to high-resource settings.
| S-EPMC8220024 | biostudies-literature
Project description:With numerous countermeasures, the number of deaths in the construction industry is still higher compared to other industries. Personal Protective Equipment (PPE) is constantly being improved to avoid these accidents, although workers intentionally or unintentionally forget to use such safety measures. It is challenging to manually run a safety check as the number of co-workers on a site can be large; however, it is a prime duty of the authority to provide maximum protection to the workers on the working site. From these motivations, we have created a computer vision (CV) based automatic PPE detection system that detects various types of PPE. This study also created a novel dataset named CHVG (four colored hardhats, vest, safety glass) containing eight different classes, including four colored hardhats, vest, safety glass, person body, and person head. The dataset contains 1,699 images and corresponding annotations of these eight classes. For the detection algorithm, this study has used the You Only Look Once (YOLO) family's anchor-free architecture, YOLOX, which yields better performance than the other object detection models within a satisfactory time interval. Moreover, this study found that the YOLOX-m model yields the highest mean average precision (mAP) than the other three versions of the YOLOX.
| S-EPMC9299268 | biostudies-literature
Project description:The COVID-19 pandemic has led to widespread shortages of personal protective equipment (PPE) for healthcare workers, including of N95 masks (filtering facepiece respirators; FFRs). These masks are intended for single use but their sterilization and subsequent reuse has the potential to substantially mitigate shortages. Here we investigate PPE sterilization using ionized hydrogen peroxide (iHP), generated by SteraMist equipment (TOMI; Frederick, MD), in a sealed environment chamber. The efficacy of sterilization by iHP was assessed using bacterial spores in biological indicator assemblies. After one or more iHP treatments, five models of N95 masks from three manufacturers were assessed for retention of function based on their ability to form an airtight seal (measured using a quantitative fit test) and filter aerosolized particles. Filtration testing was performed at a university lab and at a National Institute for Occupational Safety and Health (NIOSH) pre-certification laboratory. The data demonstrate that N95 masks sterilized using SteraMist iHP technology retain filtration efficiency up to ten cycles, the maximum number tested to date. A typical iHP environment chamber with a volume of ~?80 m3 can treat ~?7000 masks and other items (e.g. other PPE, iPADs), making this an effective approach for a busy medical center.
| S-EPMC7819989 | biostudies-literature
Project description:We modeled the stability of SARS-CoV-2 on personal protective equipment (PPE) commonly worn in hospitals when carrying out high-risk airway procedures. Evaluated PPE included the visors and hoods of two brands of commercially available powered air purifying respirators, a disposable face shield, and Tyvek coveralls. Following an exposure to 4.3 log10 plaque-forming units (PFUs) of SARS-CoV-2, all materials displayed a reduction in titer of > 4.2 log10 by 72 hours postexposure, with detectable titers at 72 hours varying by material (1.1-2.3 log10 PFU/mL). Our results highlight the need for proper doffing and disinfection of PPE, or disposal, to reduce the risk of SARS-CoV-2 contact or fomite transmission.
| S-EPMC7866333 | biostudies-literature
Project description:Personal protective equipment (PPE) shortages represent a persistent and critical challenge during the COVID-19 pandemic. Communities of 3D printing hobbyists and experts responded by designing and producing homemade, 3D-printed PPE. This report discusses the design, manufacturing and validation of the Kansas City Mask (KC Mask). Once printed and assembled, masks were fit tested at Truman Medical Center in Kansas City, MO. The KC Mask was approved for use by pandemic response administration staff at the hospital. Fortunately, due to adequate PPE supply at the time of this publication, wide utilization of the KC mask has not been required. The authors endorse the KC Mask as a stopgap measure, proven to be effective in situations of critical PPE shortage based on Centers for Disease Control and Prevention (CDC) guidelines.
| S-EPMC7860929 | biostudies-literature
Project description:ObjectiveThe COVID-19 pandemic has led to widespread shortages of personal protective equipment (PPE) for healthcare workers, including filtering facepiece respirators (FFRs) such as N95 masks. These masks are normally intended for single use, but their sterilization and subsequent reuse could substantially mitigate a world-wide shortage.DesignQuality assurance.SettingA sealed environment chamber installed in the animal facility of an academic medical center.InterventionsOne to five sterilization cycles using ionized hydrogen peroxide (iHP), generated by SteraMist equipment (TOMI; Frederick, MD).Main outcome measuresPersonal protective equipment, including five N95 mask models from three manufacturers, were evaluated for efficacy of sterilization following iHP treatment (measured with bacterial spores in standard biological indicator assemblies). Additionally, N95 masks were assessed for their ability to efficiently filter particles down to 0.3um and for their ability to form an airtight seal using a quantitative fit test. Filtration efficiency was measured using ambient particulate matter at a university lab and an aerosolized NaCl challenge at a National Institute for Occupational Safety and Health (NIOSH) pre-certification laboratory.ResultsThe data demonstrate that N95 masks sterilized using SteraMist iHP technology retain function up to five cycles, the maximum number tested to date. Some but not all PPE could also be sterilized using an iHP environmental chamber, but pre-treatment with a handheld iHP generator was required for semi-enclosed surfaces such as respirator hoses.ConclusionsA typical iHP environment chamber with a volume of ~80 m3 can treat ~7000 masks per day, as well as other items of PPE, making this an effective approach for a busy medical center.
| S-EPMC7273248 | biostudies-literature
Project description:Objectives: The provision of high-quality personal protective equipment (PPE) has been a critical challenge during the COVID-19 pandemic. We evaluated an alternative strategy, mass deployment of a powered air-purifying respirator (PeRSo), in a large university hospital. Methods: We performed prospective user feedback via questionnaires sent to healthcare workers (HCWs) issued PeRSos, economic analysis, and evaluated the real-world impact. Results: Where paired responses were available, PeRSo was preferred over droplet precautions for comfort, patient response, overall experience, and subjective feeling of safety. For all responses, more participants reported the overall experience being rated "Very good" more frequently for PeRSo. The primary limitation identified was impairment of hearing. Economic simulation exercises revealed that the adoption of PeRSo within ICU is associated with net cost savings in the majority of scenarios and savings increased progressively with greater ITU occupancy. In evaluation during the second UK wave, over 3,600 respirators were deployed, all requested by staff, which were associated with a low staff absence relative to most comparator hospitals. Conclusions: Health services should consider a widespread implementation of powered reusable respirators as a safe and sustainable solution for the protection of HCWs as SARS-CoV-2 becomes an endemic viral illness.
| S-EPMC8757687 | biostudies-literature
Project description:The COVID-19 pandemic is endangering the world due to the spread of respiration droplets with viruses. Medical workers and frontline staff need to wear respirators to protect themselves from breathing in the virus-containing respiration droplets. The most frequently used state-of-the-art respirators are of N95 standard; however, they lack self-decontamination capabilities. In addition, the viruses and bacteria can accumulate on the respirator surfaces, possessing high risks to the wearers over long-term usage. Photothermal decontamination is a contactless, fast, low-cost, and widely available method, capable of decontaminating the respirators. Herein, we report a plasmonic photothermal and superhydrophobic coating on N95 respirators, possessing significantly better protection than existing personal protection equipment. The plasmonic heating can raise the surface temperature to over 80 °C for this type of respirator within 1 min of sunlight illumination. The superhydrophobic features prohibit respiration droplets from accumulating on the respirator surfaces. The presence of the silver nanoparticles can provide additional protection via the silver ion's disinfection toward microbes. These synergistic features of the composite coatings provide the N95 respirator with better protection and can inspire experts from interdisciplinary fields to develop better personal protection equipment to fight the COVID-19 pandemic.
| S-EPMC7315824 | biostudies-literature
Project description:The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) responsible for the COVID-19 global pandemic has infected over 25 million people worldwide and resulted in the death of millions. The COVID-19 pandemic has also resulted in a shortage of personal protective equipment (PPE) in many regions around the world, particularly in middle- and low-income countries. The shortages of PPE, such as N95 respirators, is something that will persist until an effective vaccine is made available. Thus, devices that while being easy to operate can also be rapidly deployed in health centers, and long-term residences without the need for major structural overhaul are instrumental to sustainably use N95 respirators. In this report, we present the design and validation of a decontamination device that combines UV-C & B irradiation with mild-temperature treatment. The device can decontaminate up to 20 masks in a cycle of < 30 min. The decontamination process did not damage or reduce the filtering capacity of the masks. Further, the efficacy of the device to eliminate microbes and viruses from the masks was also evaluated. The photothermal treatment of our device was capable of eradicating > 99.9999% of the bacteria and > 99.99% of the virus tested.
| S-EPMC7815715 | biostudies-literature
Project description:PurposeIn the absence of vaccine, proper use of personal protective equipment (PPE) is the most important strategy to protect healthcare workers against COVID-19 infection. The recommendations on pharmacological prophylaxis against COVID-19 infection are controversial. The aim of current study was to assess PPE practices during surgery on COVID-19 negative gynecological cancer patients and use of pharmacologic prophylaxis by clinicians practicing gynecologic oncology.MethodsWe disbursed a survey questionnaire through various social media platforms among clinicians practicing gynecologic oncology. The survey consisted of 37 questions divided into five subgroups evaluating demographic details, use of pharmacological prophylaxis against COVID-19, preoperative COVID-19 screening protocol, details on PPE usage and associated discomfort, if any.ResultsTwo hundred twenty oncologists from 13 countries responded to the survey. Pharmacological prophylaxis was being used by 85 (38.6%) respondents; most common agent was hydroxychloroquin (HCQ) by 24.5% respondents. Routine preoperative screening for COVID-19 was performed by 214 (97.3%) respondents. Some degree of discomfort during surgery due to PPE use was reported by 170 (77.3%) respondents, which was moderate to severe in 73 (33.2%) respondents. Most common difficulties associated with face mask/shield were problems in communication (69.5%) and breathing (58.1%). Eye protection was associated with poor visibility, fogging and headache. Unusual fatigue attributed to PPE use was experienced by 143(65%) respondents.ConclusionUse of pharmacological prophylaxis against COVID-19 is controversial and the same is reflected in our survey. Most respondents adhered to PPE use despite experiencing some physical discomfort.Supplementary informationThe online version contains supplementary material available at 10.1007/s40944-021-00500-4.
| S-EPMC7847240 | biostudies-literature