Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Substrate-Selective Morphology of Cesium Iodide Clusters on Graphene.

ABSTRACT: Formation and characterization of low-dimensional nanostructures is crucial for controlling the properties of two-dimensional (2D) materials such as graphene. Here, we study the structure of low-dimensional adsorbates of cesium iodide (CsI) on free-standing graphene using aberration-corrected transmission electron microscopy at atomic resolution. CsI is deposited onto graphene as charged clusters by electrospray ion-beam deposition. The interaction with the electron beam forms two-dimensional CsI crystals only on bilayer graphene, while CsI clusters consisting of 4, 6, 7, and 8 ions are exclusively observed on single-layer graphene. Chemical characterization by electron energy-loss spectroscopy imaging and precise structural measurements evidence the possible influence of charge transfer on the structure formation of the CsI clusters and layers, leading to different distances of the Cs and I to the graphene.

SUBMITTER: Vats N

PROVIDER: S-EPMC7304923 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Clusters of Cesium-Lead-Iodide Perovskites in the Zeolite Matrix.

Project description:Small clusters of cesium-lead-iodide perovskites (CLIPs) have been prepared in the Na-X zeolite matrix and studied by means of spectroscopy and quantum chemical modeling. Regularity of pores in single crystals of zeolite assures the formation of clusters of a certain size. By the first-principles quantum chemical calculations, we have determined that clusters Cs4PbI6, Cs5Pb2I9, and probably Cs7Pb5I16 with a size of 0.74, 1.29, and 1.36 nm, respectively, have elevated stability compared to other species, and they fit into the pores of Na-X zeolite. Electronic energy spectra of these clusters have been calculated and compared with experimentally measured ones.

| S-EPMC8552230 | biostudies-literature

Infrared multiple photon dissociation of cesium iodide clusters doped with mono-, di- and triglycine.

Project description:Charged cesium iodide clusters doped with mono-, di- and triglycine serve as a model system for sea salt aerosols containing biological molecules. Here, we investigate reactions of these complexes under infrared irradiation, with spectra obtained by infrared multiple photon dissociation. The cluster ions are generated via electrospray ionization and analyzed in the cell of a Fourier Transform Ion Cyclotron Resonance Mass Spectrometer. Depending on the cluster size and peptide length, loss of HI or loss of a glycine unit is observed. The experimental measurements are supported by quantum chemical calculations. We show that N-H and O-H stretching modes dominate the spectrum, with large shifts depending on local interactions, namely due to interaction with iodide anions or intramolecular hydrogen bonding. Both experiment and theory indicate that several isomers are present in the experimental mixture, with different infrared fingerprints as well as dissociation pathways.

| S-EPMC7100558 | biostudies-literature

Octahedral Molybdenum Iodide Clusters Supported on Graphene for Resistive and Optical Gas Sensing.

Project description:This paper reports for the first time a gas-sensitive nanohybrid based on octahedral molybdenum iodide clusters supported on graphene flakes (Mo6@Graphene). The possibility of integrating this material into two different transducing schemes for gas sensing is proposed since the nanomaterial changes both its electrical resistivity and optical properties when exposed to gases and at room temperature. Particularly, when implemented in a chemoresistive device, the Mo6@Graphene hybrid showed an outstanding sensing performance toward NO2, revealing a limit of quantification of about 10 ppb and excellent response repeatability (0.9% of relative error). While the Mo6@Graphene chemoresistor was almost insensitive to NH3, the use of an optical transduction scheme (changes in photoluminescence) provided an outstanding detection of NH3 even for a low loading of Mo6. Nevertheless, the photoluminescence was not affected by the presence of NO2. In addition, the hybrid material revealed high stability of its gas sensing properties over time and under ambient moisture. Computational chemistry calculations were performed to better understand these results, and plausible sensing mechanisms were presented accordingly. These results pave the way to develop a new generation of multi-parameter sensors in which electronic and optical interrogation techniques can be implemented simultaneously, advancing toward the realization of highly selective and orthogonal gas sensing.

| S-EPMC9801382 | biostudies-literature

Enhanced Photocatalytic Activity and Stability in Hydrogen Evolution of Mo6 Iodide Clusters Supported on Graphene Oxide.

Project description:Catalytic properties of the cluster compound (TBA)2[Mo6Ii8(O2CCH3)a6] (TBA = tetrabutylammonium) and a new hybrid material (TBA)2Mo6Ii8@GO (GO = graphene oxide) in water photoreduction into molecular hydrogen were investigated. New hybrid material (TBA)2Mo6Ii8@GO was prepared by coordinative immobilization of the (TBA)2[Mo6Ii8(O2CCH3)a6] onto GO sheets and characterized by spectroscopic, analytical, and morphological techniques. Liquid and, for the first time, gas phase conditions were chosen for catalytic experiments under UV-Vis irradiation. In liquid water, optimal H2 production yields were obtained after using (TBA)2[Mo6Ii8(O2CCH3)a6] and (TBA)2Mo6Ii8@GO) catalysts after 5 h of irradiation of liquid water. Despite these remarkable catalytic performances, "liquid-phase" catalytic systems have serious drawbacks: the cluster anion evolves to less active cluster species with partial hydrolytic decomposition, and the nanocomposite completely decays in the process. Vapor water photoreduction showed lower catalytic performance but offers more advantages in terms of cluster stability, even after longer radiation exposure times and recyclability of both catalysts. The turnover frequency (TOF) of (TBA)2Mo6Ii8@GO is three times higher than that of the microcrystalline (TBA)2[Mo6Ii8(O2CCH3)a6], in agreement with the better accessibility of catalytic cluster sites for water molecules in the gas phase. This bodes well for the possibility of creating {Mo6I8}4+-based materials as catalysts in hydrogen production technology from water vapor.

| S-EPMC7407389 | biostudies-literature

Observation of the unexpected morphology of graphene wrinkle on copper substrate.

Project description:Graphene, a two-dimensional material, has a wide range of unique properties and could be used in the development of varieties of mechanic, electronic and photonic devices, therefore methods to synthesis large-area high-quality graphene films are urgently required. Chemical vapor deposition (CVD) has been of particular interest recently due to its simplicity and low cost. However, because of the mismatch of thermal expansion coefficients, high densities of wrinkles are commonly observed. Despite their prevalence and potential impact on large-scale graphene properties, relatively little is known about their structural morphology and formation mechanism. In this article, morphologies of graphene obtained by CVD are experimentally investigated by an atomic force microscope (AFM) and results show that the profiles of wrinkles are much larger than they should be. By using theoretical methods and molecular dynamics simulations (MD), we find internal molecules created during CVD process which supply additional pressure is the main mechanism.

| S-EPMC5557975 | biostudies-literature

Carbon clusters on substrate surface for graphene growth- theoretical and experimental approach.

Project description:Growth morphology of carbon clusters deposited on different substrates were investigated by theoretical and experimental approach. For theoretical approach, molecular dynamics was employed to evaluate an adsorptive stability of different size of carbon clusters placed on different substrates. The adsorptive stability was estimated by the difference of total energy of supercell designed as carbon cluster placed on a certain crystal plane of substrate. Among the simulations of this study, carbon cluster flatly settled down on the surface of SrTiO[Formula: see text](001). The result was experimentally verified with layer by layer growth of graphene by pulsed laser deposition in carbon dioxide atmosphere. The absorptive stability can be useful reference for screening substrate for any target material other than graphene.

| S-EPMC9500104 | biostudies-literature

Vacuum-Deposited Cesium Tin Iodide Thin Films with Tunable Thermoelectric Properties.

Project description:Most current thermoelectric materials have important drawbacks, such as toxicity, scarceness, and peak operating temperatures above 300 °C. Herein, we report the thermoelectric properties of different crystalline phases of Sn-based perovskite thin films. The 2D phase, Cs2SnI4, is obtained through vacuum thermal deposition and easily converted into the black β phase of CsSnI3 (B-β CsSnI3) by annealing at 150 °C. B-β CsSnI3 is a p-type semiconductor with a figure of merit (ZT) ranging from 0.021 to 0.033 for temperatures below 100 °C, which makes it a promising candidate to power small electronic devices such as wearable sensors which may be interconnected in the so-called Internet of Things. The B-β phase is stable in nitrogen, whereas it spontaneously oxidizes to Cs2SnI6 upon exposure to air. Cs2SnI6 shows a negative Seebeck coefficient and an ultralow thermal conductivity. However, the ZT values are 1 order of magnitude lower than for B-β CsSnI3 due to a considerably lower electrical conductivity.

| S-EPMC9400028 | biostudies-literature

Cesium lead iodide electrospun fibrous membranes for white light-emitting diodes.

Project description:Inorganic perovskite cesium lead iodide nanocrystals (CsPbI3NCs) are good candidates for optoelectronic devices because of their excellent properties of remarkable luminous performance (high luminous efficiency, narrow luminous spectral line), and high photoelectric conversion efficiency by using simple preparation method. But their inherent poor stability greatly limits its practical applications. In this paper, electrospinning is used to grow fibrous membranes with embedded cesium lead iodide perovskite nanocrystals (PNCs) formedin situin a one-step process. It was found that cubicα-CsPbI3PNCs were formed in polymer fibers, showing bright and uniform fluorescence signals. Furthermore, the water wetting angles were increased by the fibrous structure enhancing the hydrophobicity and the stability of the fibrous membranes in water. The electrospun fibrous membrane containing CsPbI3was combined with another membrane containing CsPbBr3under a blue light-emitting diode (LED) to create a white LED (WLED) in air successfully with CIE coordinates (0.3020, 0.3029), and a correlated color temperature of 7527 °K, indicating high purity of WLED. Our approach provides a new way to create highly stable, photoluminescent water-resistant perovskite nanocrystalline films.

| S-EPMC9295438 | biostudies-literature

The Defect Passivation of Tin Halide Perovskites Using a Cesium Iodide Modification.

Project description:Tin-based perovskites are promising for realizing lead-free perovskite solar cells; however, there remains a significant challenge to achieving high-performance tin-based perovskite solar cells. In particular, the device fill factor was much lower than that of other photovoltaic cells. Therefore, understanding how the fill factor was influenced by device physical mechanisms is meaningful. In this study, we reported a method to improve the device fill factor using a thin cesium iodide layer modification in tin-based perovskite cells. With the thin passivation layer, a high-quality perovskite film with larger crystals and lower charge carrier densities was obtained. As a result, the series resistance of devices was decreased; the shunt resistance of devices was increased; and the non-radiative recombination of devices was suppressed. Consequently, the fill factor, and the device efficiency and stability were greatly enhanced. The champion tin-based perovskite cells showed a fill factor of 63%, an efficiency of 6.1% and excellent stability. Our study reveals that, with a moderate thin layer modification strategy, the long-term stability of tin-based PSCs can be developed.

| S-EPMC10490360 | biostudies-literature

Elementary process for CVD graphene on Cu(110): size-selective carbon clusters.

Project description:Revealing the graphene growth mechanism at the atomic-scale is of great importance for achieving high quality graphene. However, the lack of direct experimental observation and density functional theory (DFT) verification hinders a comprehensive understanding of the structure of the carbon clusters and evolution of the graphene growth on surface. Here, we report an in-situ low-temperature scanning tunneling microscopy (LT-STM) study of the elementary process of chemical vapor deposition (CVD) graphene growth via thermal decomposition of methane on Cu(110), including the formation of monodispersed carbon clusters at the initial stage, the graphene nucleation and the ripening of graphene islands to form continuous graphene film. STM measurement, supported by DFT calculations, suggests that the carbon clusters on the surface are C2H5. It is found that graphene layers can be joined by different domains, with a relative misorientation of 30°. These graphene layers can be decoupled from Cu(110) through low temperature thermal cycling.

| S-EPMC3961735 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data