Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

IdPAD: Paper Analytical Device for Presumptive Identification of Illicit Drugs.

ABSTRACT: As drug overdose deaths across the United States continue to rise, there is increasing interest in field testing of illicit substances. This work discusses a paper-based analytical device (idPAD) that can run a library of 12 colorimetric tests at the same time, each detecting different chemical functional groups and materials found in illicit drugs, distractor substances, and cutting agents. The idPAD requires no electricity, costs less than $2 USD, and requires minimal training to operate. The results of the 12 tests form a color barcode which is "read" by comparison to standard images. The accuracy of the idPAD was assessed using samples of heroin, cocaine HCl, crack, and methamphetamine at concentrations of 25%-100% in a lactose matrix, as well as pure lactose. Based on 840 "reads" by three different users, the idPAD showed 95% sensitivity and 100% specificity for detecting these drugs; the most common error was mistaking cocaine HCl for crack or crack for cocaine HCl. In a second step, samples of heroin, cocaine, and methamphetamine (n = 30) and distractor substances (pharmaceuticals, cutting agents, and other illicit drugs, n = 64) were tested by two readers, yielding a sensitivity of 100% and specificity of 97%. Targeted substances were detected reliably at 55-180 μg/lane, and the idPAD was found to be stable for at least 3 months when stored at room temperature. The library approach used in the idPAD may provide the accuracy and robustness necessary for a presumptive field drug test.

SUBMITTER: Lockwood TE

PROVIDER: S-EPMC7332374 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Microfluidic paper-based analytical device for aerosol oxidative activity.

Project description:Human exposure to particulate matter (PM) air pollution has been linked with respiratory, cardiovascular, and neurodegenerative diseases, in addition to various cancers. Consistent among all of these associations is the hypothesis that PM induces inflammation and oxidative stress in the affected tissue. Consequently, a variety of assays have been developed to quantify the oxidative activity of PM as a means to characterize its ability to induced oxidative stress. The vast majority of these assays rely on high-volume, fixed-location sampling methods due to limitations in assay sensitivity and detection limit. As a result, our understanding of how personal exposure contributes to the intake of oxidative air pollution is limited. To further this understanding, we present a microfluidic paper-based analytical device (μPAD) for measuring PM oxidative activity on filters collected by personal sampling. The μPAD is inexpensive to fabricate and provides fast and sensitive analysis of aerosol oxidative activity. The oxidative activity measurement is based on the dithiothreitol assay (DTT assay), uses colorimetric detection, and can be completed in the field within 30 min following sample collection. The μPAD assay was validated against the traditional DTT assay using 13 extracted aerosol samples including urban aerosols, biomass burning PM, cigarette smoke, and incense smoke. The results showed no significant differences in DTT consumption rate measured by the two methods. To demonstrate the utility of the approach, personal samples were collected to estimate human exposures to PM from indoor air, outdoor air on a clean day, and outdoor air on a wildfire-impacted day in Fort Collins, CO. Filter samples collected on the wildfire day gave the highest oxidative activity on a mass normalized basis, whereas typical ambient background air showed the lowest oxidative activity.

| S-EPMC3556395 | biostudies-literature

Handmade Paper as a Paper Analytical Device for Determining the Quality of an Antidiabetic Drug.

Project description:Paper analytical devices (PADs) are a class of low-cost, portable, and easy-to-use platform for several analytical tests in clinical diagnostics, environmental pollution monitoring, and food and drug safety screening. These devices are primarily made from cellulosic paper. Considering the importance of eco-friendly and local or distributed manufacturing of devices realized during the COVID-19 pandemic, we systematically studied the potential of handmade Nepali paper to be used in fabricating PADs in this work. We characterized five different handmade papers made from locally available plant fibers using an eco-friendly method and used them to fabricate PADs for determining the drug quality. The thickness, grammage, and apparent density of the paper samples ranged from 198.6 to 314.8 μm, 49.1 to 117.8 g/m2, and 0.23 to 0.43 g/cm3, respectively. The moisture content, water filtration, and wicking speed ranged from 5.8 to 7.1%, 35.7 to 156.7, and 0.062 to 0.124 mms-1, respectively. Furthermore, the water contact angle and porosity ranged from 76.6 to 112.1° and 79 to 83%, respectively. The best paper sample (P5) was chosen to fabricate PADs for the determination of metformin, an antidiabetic drug. The metformin assay on PADs followed a linear range from 0.0625 to 0.5 mg/mL. The assay had a limit of detection and limit of quantitation of 0.05 and 0.18 mg/mL, respectively. The average amount of metformin concentration in samples collected from local pharmacies (n = 20) was 465.6 ± 15.1 mg/tablet. When compared with the spectrophotometric method, PAD assay correctly predicted the concentration of 90% samples. The PAD assay on handmade paper may provide a low-cost and easy-to-use system for screening the quality of drugs and other point-of-need applications.

| S-EPMC9089334 | biostudies-literature

Aptamer-based origami paper analytical device for electrochemical detection of adenosine.

Project description:Paper biosensors: an origami sensor is printed on a single piece of paper, folded into a three-dimensional fluidic device, and encapsulated by thermal lamination. Aptamer is trapped in the fluidic channel, where it binds to the target and releases an enzyme to generate a signal. The device is read out using a digital multimeter.

| S-EPMC3486962 | biostudies-literature

Multiplexed paper analytical device for quantification of metals using distance-based detection.

Project description:Exposure to metal-containing aerosols has been linked with adverse health outcomes for almost every organ in the human body. Commercially available techniques for quantifying particulate metals are time-intensive, laborious, and expensive; often sample analysis exceeds $100. We report a simple technique, based upon a distance-based detection motif, for quantifying metal concentrations of Ni, Cu, and Fe in airborne particulate matter using microfluidic paper-based analytical devices. Paper substrates are used to create sensors that are self-contained, self-timing, and require only a drop of sample for operation. Unlike other colorimetric approaches in paper microfluidics that rely on optical instrumentation for analysis, with distance-based detection, analyte is quantified visually based on the distance of a colorimetric reaction, similar to reading temperature on a thermometer. To demonstrate the effectiveness of this approach, Ni, Cu, and Fe were measured individually in single-channel devices; detection limits as low as 0.1, 0.1, and 0.05 ?g were reported for Ni, Cu, and Fe. Multiplexed analysis of all three metals was achieved with detection limits of 1, 5, and 1 ?g for Ni, Cu, and Fe. We also extended the dynamic range for multi-analyte detection by printing concentration gradients of colorimetric reagents using an off-the-shelf inkjet printer. Analyte selectivity was demonstrated for common interferences. To demonstrate utility of the method, Ni, Cu, and Fe were measured from samples of certified welding fume; levels measured with paper sensors matched known values determined gravimetrically.

| S-EPMC4470859 | biostudies-literature

A microfluidic paper-based analytical device for rapid quantification of particulate chromium.

Project description:Occupational exposure to Cr is concerning because of its myriad of health effects. Assessing chromium exposure is also cost and resource intensive because the analysis typically uses sophisticated instrumental techniques like inductively coupled plasma-mass spectrometry (ICP-MS). Here, we report a novel, simple, inexpensive microfluidic paper-based analytical device (?PAD) for measuring total Cr in airborne particulate matter. In the ?PAD, tetravalent cerium (Ce(IV)) was used in a pretreatment zone to oxidize all soluble Cr to Cr(VI). After elution to the detection zone, Cr(VI) reacts with 1,5-diphenylcarbazide (1,5-DPC) forming 1,5-diphenylcarbazone (DPCO) and Cr(III). The resulting Cr(III) forms a distinct purple colored complex with the DPCO. As proof-of-principle, particulate matter (PM) collected on a sample filter was analyzed with the ?PAD to quantify the mass of total Cr. A log-linear working range (0.23-3.75 ?g; r(2)=0.998) between Cr and color intensity was obtained with a detection limit of 0.12 ?g. For validation, a certified reference containing multiple competing metals was analyzed. Quantitative agreement was obtained between known Cr levels in the sample and the Cr measured using the ?PAD.

| S-EPMC3842604 | biostudies-literature

Development of an Electrochemical Paper-Based Analytical Device for Trace Detection of Virus Particles.

Project description:Viral pathogens are a serious health threat around the world, particularly in resource limited settings, where current sensing approaches are often insufficient and slow, compounding the spread and burden of these pathogens. Here, we describe a label-free, point-of-care approach toward detection of virus particles, based on a microfluidic paper-based analytical device with integrated microwire Au electrodes. The device is initially characterized through capturing of streptavidin modified nanoparticles by biotin-modified microwires. An order of magnitude improvement in detection limits is achieved through use of a microfluidic device over a classical static paper-based device, due to enhanced mass transport and capturing of particles on the modified electrodes. Electrochemical impedance spectroscopy detection of West Nile virus particles was carried out using antibody functionalized Au microwires, achieving a detection limit of 10.2 particles in 50 μL of cell culture media. No increase in signal is found on addition of an excess of a nonspecific target (Sindbis). This detection motif is significantly cheaper (∼$1 per test) and faster (∼30 min) than current methods, while achieving the desired selectivity and sensitivity. This sensing motif represents a general platform for trace detection of a wide range of biological pathogens.

| S-EPMC6595480 | biostudies-literature

Trends and challenges in analytical chemistry for multi-analysis of illicit drugs employing wastewater-based epidemiology.

Project description:Wastewater-based epidemiology (WBE) for quantification of illicit drug biomarkers (IDBs) in wastewater samples is an effective tool that can provide information about drug consumption. The most commonly quantified IDBs belong to different chemical classes, including cocaine, amphetamine-type stimulants, opioids, and cannabinoids, so the different chemical properties of these molecules pose a challenge in the development of analytical methods for multi-analyte analysis. Recent workflows include the steps of sampling and storage, sample preparation using solid-phase extraction (SPE) or without extraction, and quantification of analytes employing gas or liquid chromatography coupled with mass spectrometry. The greatest difficulty is due to the fact that wastewater samples are complex chemical mixtures containing analytes with different chemical properties, often present at low concentrations. Therefore, in the development of analytical methods, there is the need to simplify and optimize the analytical workflows, reducing associated uncertainties, analysis times, and costs. The present work provides a critical bibliographic survey of studies published from the year 2020 until now, highlighting the challenges and trends of published analytical workflows for the multi-analysis of IDBs in wastewater samples, considering sampling and sample preparation, method validation, and analytical techniques.

| S-EPMC10034891 | biostudies-literature

Non-contact identification and differentiation of illicit drugs using fluorescent films.

Project description:Sensitive and rapid identification of illicit drugs in a non-contact mode remains a challenge for years. Here we report three film-based fluorescent sensors showing unprecedented sensitivity, selectivity, and response speed to the existence of six widely abused illicit drugs, including methamphetamine (MAPA), ecstasy, magu, caffeine, phenobarbital (PB), and ketamine in vapor phase. Importantly, for these drugs, the sensing can be successfully performed after 5.0?×?105, 4.0?×?105, 2.0?×?105, 1.0?×?105, 4.0?×?104, and 2.0?×?102 times dilution of their saturated vapor with air at room temperature, respectively. Also, presence of odorous substances (toiletries, fruits, dirty clothes, etc.), water, and amido-bond-containing organic compounds (typical organic amines, legal drugs, and different amino acids) shows little effect upon the sensing. More importantly, discrimination and identification of them can be realized by using the sensors in an array way. Based upon the discoveries, a conceptual, two-sensor based detector is developed, and non-contact detection of the drugs is realized.

| S-EPMC5923207 | biostudies-other

Janus electrochemistry: Simultaneous electrochemical detection at multiple working conditions in a paper-based analytical device.

Project description:The simultaneous detection of multiple analytes from a single sample is a critical tool for the analysis of real world samples. However, this is challenging to accomplish in the field by current electroanalytical techniques, where tuning assay conditions towards a target analyte often results in poor selectivity and sensitivity for other species in the mixture. In this work, an electrochemical paper-based analytical device (ePAD) capable of performing simultaneous electrochemical experiments in different solution conditions on a single sample was developed for the first time. We refer to the system as a Janus-ePAD after the two-faced Greek god because of the ability of the device to perform electrochemistry on the same sample under differing solution conditions at the same time with a single potentiostat. In a Janus-ePAD, a sample wicks down two channels from a single inlet towards two discreet reagent zones that adjust solution conditions, such as pH, before flow termination in two electrochemical detection zones. These zones feature independent working electrodes and shared reference and counter electrodes, facilitating simultaneous detection of multiple species at each species' optimal solution condition. The device utility and applicability are demonstrated through the simultaneous detection of two biologically relevant species (norepinephrine and serotonin) and a common enzymatic assay product (p-aminophenol) at two different solution pH conditions. Janus-ePADs show great promise as an inexpensive and broadly applicable platform which can reduce the complexity and/or number of steps required in multiplexed analysis, while also operating under the optimized conditions of each species present in a mixture.

| S-EPMC6814273 | biostudies-literature

An Origami Paper-Based Analytical Device for Rapid and Sensitive Analysis of Acrylamide in Foods.

Project description:Rapid and sensitive detection of acrylamide in food samples is important for food safety and public health. Here, we describe a disposable origami paper-based analytical device (denoted doPAD) for colorimetric detection of acrylamide. This device uniquely exploits 3D origami folding paper for spatial control of the target recognition and signal readout, thus resulting in a positive correlation between the signals and the analytes. Under optimal conditions, the device achieved the quantitative analysis of acrylamide with a limit of detection of 1.13 μg/L within 120 min (including a derivatization time of 90 min and an assay time of 21 min). Furthermore, our method allowed the rapid and sensitive detection of acrylamide in complex food matrices. We envision that the platform described will find useful applications in the fields of food safety and environmental health.

| S-EPMC8777769 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data