Dataset of measured and commented pantograph electric arcs in DC railways.
Ontology highlight
ABSTRACT:
SUBMITTER: Signorino D
PROVIDER: S-EPMC7378579 | biostudies-literature | 2020 Aug
REPOSITORIES: biostudies-literature
Publications
Dataset of measured and commented pantograph electric arcs in DC railways.
Signorino Davide D Giordano Domenico D Mariscotti Andrea A Gallo Daniele D Femine Antonio Delle AD Balic Fabio F Quintana Jorge J Donadio Lorenzo L Biancucci Alfredo A
Data in brief 20200703
DC railways are characterized by particularly intense arcing caused by pantograph detachment, due to the large current intensity and the general implementation of onboard resonant filters, whose transient response is triggered by electric transients including electric arcs. Electric arc depends on the train speed (the relative speed between the sliding contact over the pantograph and the hot spot on the catenary system), the intensity of the collected pantograph current and the line voltage leve ...[more]
Similar Datasets
Project description:AC railways are characterized by peculiar Power Quality phenomena, where moving loads (trains, locomotives, etc.) interact with the supply network that provides electrical energy through the overhead contact line. Distortion, resonances, transients overlap in a complex dynamic scenario, that sees several and various problems of Power Quality, network stability, power and energy metering and disturbance to systems and equipment. For all related studies and analysis raw experimental data are extremely important. The provided data consists of time-domain waveforms of sampled pantograph voltage and current: each recording is tagged with the specific train operating condition (traction, cruising/coasting, braking, standstill), the active power and the speed, to support correlation and clustering of data.
| S-EPMC7200785 | biostudies-literature
Project description:We investigate a dc electric concentrator for steady current fields theoretically and experimentally. Based on the transformation electrostatics, we show that the dc concentrator can focus electric currents into the central concentrated region and enhance the electric field and current density. Outside the concentrator, the current lines are distributed as the same as those in a homogeneous conducting material. Hence, such a dc electric concentrator has no impact on other external devices. Using the analogy between electrically conducting materials and resistor networks, we design, fabricate, and test a dc concentrator using the circuit theory. The measured results agree very well with the theoretical predictions and numerical simulations, demonstrating the perfect concentrating performance.
| S-EPMC3518816 | biostudies-other
Project description:Naturally-occurring, endogenous electric fields (EFs) have been detected at skin wounds, damaged tissue sites and vasculature. Applied EFs guide migration of many types of cells, including endothelial cells to migrate directionally. Homing of endothelial progenitor cells (EPCs) to an injury site is important for repair of vasculature and also for angiogenesis. However, it has not been reported whether EPCs respond to applied EFs. Aiming to explore the possibility to use electric stimulation to regulate the progenitor cells and angiogenesis, we tested the effects of direct-current (DC) EFs on EPCs. We first used immunofluorescence to confirm the expression of endothelial progenitor markers in three lines of EPCs. We then cultured the progenitor cells in EFs. Using time-lapse video microscopy, we demonstrated that an applied DC EF directs migration of the EPCs toward the cathode. The progenitor cells also align and elongate in an EF. Inhibition of vascular endothelial growth factor (VEGF) receptor signaling completely abolished the EF-induced directional migration of the progenitor cells. We conclude that EFs are an effective signal that guides EPC migration through VEGF receptor signaling in vitro. Applied EFs may be used to control behaviors of EPCs in tissue engineering, in homing of EPCs to wounds and to an injury site in the vasculature.
| S-EPMC3238468 | biostudies-literature
Project description:BackgroundThe formation of acetylcholine receptor (AChR) cluster is a key event during the development of the neuromuscular junction. It is induced through the activation of muscle-specific kinase (MuSK) by the heparan-sulfate proteoglycan agrin released from the motor axon. On the other hand, DC electric field, a non-neuronal stimulus, is also highly effective in causing AChRs to cluster along the cathode-facing edge of muscle cells.Methodology/principal findingsTo understand its molecular mechanism, quantum dots (QDs) were used to follow the movement of AChRs as they became clustered under the influence of electric field. From analyses of trajectories of AChR movement in the membrane, it was concluded that diffuse receptors underwent Brownian motion until they were immobilized at sites of cluster formation. This supports the diffusion-mediated trapping model in explaining AChR clustering under the influence of this stimulus. Disrupting F-actin cytoskeleton assembly and interfering with rapsyn-AChR interaction suppressed this phenomenon, suggesting that these are integral components of the trapping mechanism induced by the electric field. Consistent with the idea that signaling pathways are activated by this stimulus, the localization of tyrosine-phosphorylated forms of AChR β-subunit and Src was observed at cathodal AChR clusters. Furthermore, disrupting MuSK activity through the expression of a kinase-dead form of this enzyme abolished electric field-induced AChR clustering.ConclusionsThese results suggest that DC electric field as a physical stimulus elicits molecular reactions in muscle cells in the form of cathodal MuSK activation in a ligand-free manner to trigger a signaling pathway that leads to cytoskeletal assembly and AChR clustering.
| S-EPMC3201969 | biostudies-literature
Project description:In this work, the electro-coalescence process of three nanodroplets under a constant DC electric field is investigated via molecular dynamics simulations (MD), aiming to explore the electric manipulation of multiple droplets coalescence on the molecular level. The symmetrical and asymmetrical dynamic evolutions of electrocoalescence process can be observed. Our MD simulations show that there are two types of critical electric fields to induce the special dynamics. The chain configuration can be formed, when one of the critical electric field is exceeded, referred to as Ecc. On the other hand, there is another critical electric field to change the coalescence pattern from complete coalescence to partial coalescence, the so-called Ecn. Finally, we find that the use of the pulsed DC electric field can overcome the drawbacks of the constant DC electric field in the crude oil industry, and the mechanisms behind the suppressed effect of the water chain or non-coalescence are further revealed.
| S-EPMC11003697 | biostudies-literature
Project description:Regarding climate change and energy resource problems, cargo movement in the urban environment is essential to shift to a more sustainable mode. As cities seek to slash transport-related emissions and tackle traffic congestion, the cargo bike is showing itself to be an attractive and versatile last-mile delivery alternative. To this end, this article presents a series of datasets for the Electric Capacitated Travelling Salesman Problem (EC-TSP). This problem has been built for modeling and solving the e-cargo bike parcel distribution problem in urban environments. For the design of these datasets, real geographical data have been used that are in the city centers of Athens, Thessaloniki, Patra, and Larisa in Greece. These datasets have been used for the assessment of e-cargo bikes versus typical delivery vans in terms of operational efficiency and CO2e emissions. The entire benchmark is composed of 9 instances comprised of 14-29 nodes each. The datasets are publicly available for use and modification.
| S-EPMC10430151 | biostudies-literature
Project description:The checklist of European Gelechiidae covers 865 species, belonging to 109 genera, with three species records which require confirmation. Further, it is the first checklist to include a complete coverage of proved synonyms of species and at generic level. The following taxonomic changes are introduced: Pseudosophronia constanti (Nel, 1998) syn. nov. of Pseudosophronia exustellus (Zeller, 1847), Metzneria expositoi Vives, 2001 syn. nov. of Metzneria aestivella (Zeller, 1839); Sophronia ascalis Gozmány, 1951 syn. nov. of Sophronia grandii Hering, 1933, Aproaerema incognitana (Gozmány, 1957) comb. nov., Aproaerema cinctelloides (Nel & Varenne, 2012) comb. nov., Aproaerema azosterella (Herrich-Schäffer, 1854) comb. nov., Aproaerema montanata (Gozmány, 1957) comb. nov., Aproaerema cincticulella (Bruand, 1851) comb. nov., Aproaerema buvati (Nel, 1995) comb. nov., Aproaerema linella (Chrétien, 1904) comb. nov., Aproaerema captivella (Herrich-Schäffer, 1854) comb. nov., Aproaerema semicostella (Staudinger, 1871) comb. nov., Aproaerema steppicola (Junnilainen, 2010) comb. nov., Aproaerema cottienella (Nel, 2012) comb. nov., Ptocheuusa cinerella (Chrétien, 1908) comb. nov., Pragmatodes melagonella (Constant, 1895) comb. nov., Pragmatodes albagonella (Varenne & Nel, 2010) comb. nov., Pragmatodes parvulata (Gozmány, 1953) comb. nov., Oxypteryx nigromaculella (Millière, 1872) comb. nov., Oxypteryx wilkella (Linnaeus, 1758) comb. nov., Oxypteryx ochricapilla (Rebel, 1903) comb. nov., Oxypteryx superbella (Zeller, 1839) comb. nov., Oxypteryx mirusella (Huemer & Karsholt, 2013) comb. nov., Oxypteryx baldizzonei (Karsholt & Huemer, 2013) comb. nov., Oxypteryx occidentella (Huemer & Karsholt, 2011) comb. nov., Oxypteryx libertinella (Zeller, 1872) comb. nov., Oxypteryx gemerensis (Elsner, 2013) comb. nov., Oxypteryx deserta (Piskunov, 1990) comb. nov., Oxypteryx unicolorella (Duponchel, 1843) comb. nov., Oxypteryx nigritella (Zeller, 1847) comb. nov., Oxypteryx plumbella (Heinemann, 1870) comb. nov., Oxypteryx isostacta (Meyrick, 1926) comb. nov., Oxypteryx helotella (Staudinger, 1859) comb. nov., Oxypteryx parahelotella (Nel, 1995) comb. nov., Oxypteryx graecatella (Šumpich & Skyva, 2012) comb. nov.; Aproaerema genistae (Walsingham, 1908) comb. rev., Aproaerema thaumalea (Walsingham, 1905) comb. rev.; Dichomeris neatodes Meyrick, 1923 sp. rev.; Caryocolum horoscopa (Meyrick, 1926) stat. rev.; Ivanauskiella occitanica (Nel & Varenne, 2013) sp. rev.; Apodia martinii Petry, 1911 sp. rev.; Caulastrocecis cryptoxena (Gozmány, 1952) sp. rev. Following Article 23.9.2 ICZN we propose Caryocolum blandella (Douglas, 1852) (Gelechia) nom. protectum and Caryocolum signatella (Eversmann, 1844) (Lita) nom. oblitum.
| S-EPMC7109147 | biostudies-literature
Project description:Liquid pumping can occur along the outer surface of an electrode under a DC electric field. For biological applications, a better understanding of the ionic solution pumping mechanism is required. Here, we fabricated CNT wire electrodes (CWEs) and tungsten wire electrodes (TWEs) of various diameters to assess an ionic solution pumping. A DC electric field created by a bias of several volts pumped the ionic solution in the direction of the negatively biased electrode. The resulting electro-osmotic flow was attributed to the movement of an electric double layer near the electrode, and the flow rates along the CWEs were on the order of picoliters per minute. According to electric field analysis, the z-directional electric field around the meniscus of the small electrode was more concentrated than that of the larger electrode. Thus, the pumping effect increased as the electrode diameter decreased. Interestingly in CWEs, the initiating voltage for liquid pumping did not change with increasing diameter, up to 20 ?m. We classified into three pumping zones, according to the initiating voltage and faradaic reaction. Liquid pumping using the CWEs could provide a new method for biological studies with adoptable flow rates and a larger 'Recommended pumping zone'.
| S-EPMC4488867 | biostudies-other
Project description:Printing electronic components on a chip edge and a stepped substrate with functional inks are an attractive approach for achieving flexible and inexpensive circuits for applications such as flexible displays and large-area chemo/bio/radioactivity sensors. However, it is still challenging because a sufficient cover of the 100 μm high step at the chip edge with a high-resolution pattern is the hardest part of the layer assembling by inkjet printing. Herein, we present a simple and effective strategy to generate electrically conductive line-patterns on stepped substrates by applying the DC electric field. On the surface of flat polyimide substrate, the fine line-pattern (less than 850 nm in line width) is achieved with a polyaniline coated MWCNT dispersed ink. Furthermore, 9.9 μm of line width is successfully patterned on the high stepped poly(dimethylsiloxane) substrate, higher than 100 μm, by printing only 1 time.
| S-EPMC5377574 | biostudies-literature
Project description:Rail transport is a key stepping stone in the EU's transport policy and is pinpointed for investment and growth over the coming decades. This expanding infrastructure implies increased exposure to environmental stressors, such as noise and ground-borne vibrations. Little is known about the health impacts of exposure to these vibrations. The aim of this paper is to examine the association between annoyance from rail vibrations and the distance of residential dwelling from the railway. It reports the first results of a large epidemiological study, EpiVib, which was designed to investigate the long-term health effects of exposure to rail vibrations. The first part of this study examines a self-reported questionnaire. In total, 6894 individuals aged between 18 and 80 living within 1 km of a railway in west Sweden participated. Results presented here examine the association between distance to the railway and annoyance from vibrations and are stratified by train type. A positive association between closer distance and increased annoyance is seen. After adjustment for important modifiers, results showed that vibrations from freight trains and maintenance operations are reported to be moderately and highly annoying at distances of up to 400 m from the railway and diesel up to 300 m. Vibration from passenger and fast trains are significantly annoying up to 200 m from the track. Vibration from freight trains and maintenance operations were considered highly annoying up to 300 m from the track, diesel up to 400 m. Vibration from passenger and fast trains are not reported to be highly annoying after adjustment. Heavier, slower moving locomotives, in the form of diesel and freight trains, appear to be the source of annoyance at distances further from the railway compared to passenger and fast trains. This has implications in terms of property, transport, and infrastructure planning.
| S-EPMC6163999 | biostudies-literature