Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A polycarboxylic/ether composite polymer electrolyte via in situ UV-curing for all-solid-state lithium battery.

ABSTRACT: A polycarboxylic/ether composite polymer electrolyte derived from two-arm monomer and polyethylene oxide (PEO) was in situ synthesized on the cathode. The composite electrolyte exhibits a high ionic conductivity of 3.6 × 10-5 S cm-1, high oxidation stability, excellent stability towards Li metal and makes Li/LiFePO4 present good cyclic and rate performance at 25°C.

SUBMITTER: Wang W

PROVIDER: S-EPMC7428264 | biostudies-literature | 2020 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

A polycarboxylic/ether composite polymer electrolyte via in situ UV-curing for all-solid-state lithium battery.

Wang Wenli W Qiu Ziwen Z Wang Qian Q Zhou Xiaoyu X Liu Yang Y Zhou Jingjing J Guo Bingkun B

Royal Society open science 20200715 7

A polycarboxylic/ether composite polymer electrolyte derived from two-arm monomer and polyethylene oxide (PEO) was in situ synthesized on the cathode. The composite electrolyte exhibits a high ionic conductivity of 3.6 × 10-5 S cm-1, high oxidation stability, excellent stability towards Li metal and makes Li/LiFePO4 present good cyclic and rate performance at 25°C. ...[more]

PMID: 32874650

Similar Datasets

High-Performance Solid Composite Polymer Electrolyte for all Solid-State Lithium Battery Through Facile Microstructure Regulation.

Project description:Solid composite polymer electrolytes are the optimal candidate for all solid-state lithium batteries, because of their enhanced ionic conductivities, long-life cycle ability and compatibility to lithium anode. Herein, we reported a kind of solid composite polymer electrolyte comprised of poly(ethylene oxide), graphitic-like carbon nitride and lithium perchlorate, which was prepared by a facile solution blending method. Microstructure of the solid composite polymer electrolyte was regulated by thermal annealing and interaction among components and was characterized by XRD, DSC, FTIR-ATR, and ROM. The obtained solid composite polymer electrolyte achieved an ionic conductivity as high as 1.76 × 10-5 S cm-1 at 25°C. And the electrochemical stable window and the lithium ion transference number, t+, were also obviously enhanced. LiFePO4/Li solid-state batteries with the annealed PEO-LiClO4-g-C3N4 solid polymer electrolyte presented a high initial discharge capacity of 161.2 mAh g-1 and superior cycle stability with a capacity retention ratio of 81% after 200 cycles at 1C at 80°C. The above results indicates that the thermal annealing treatment and g-C3N4 as a novel structure modifier is crucial for obtaining the high-performance solid composite polymer electrolytes used in the all solid-state lithium battery.

| S-EPMC6554539 | biostudies-literature

Self-Enhancing Gel Polymer Electrolyte by In Situ Construction for Enabling Safe Lithium Metal Battery.

Project description:Lithium metal battery (LMB) possessing a high theoretical capacity is a promising candidate of advanced energy storage devices. However, its safety and stability are challenged by lithium dendrites and the leakage of liquid electrolyte. Here, a self-enhancing gel polymer electrolyte (GPE) is created by in situ polymerizing 1,3-dioxolane (DOL) in the nanofibrous skeleton for enabling safe LMB. The nanofiber membrane possesses a better affinity with poly-DOL (PDOL) than commercial separator for constructing homogeneous GPE with enhanced ion conductivity. Furthermore, polydopamine is introduced on nanofiber membrane to form hydrogen bonding with PDOL and bis((trifluoromethyl)sulfonyl)imide anion, dramatically improving the mechanical strength, ionic conductivity, and transference number of GPE. Besides, molecular dynamic simulation is used to reveal the intrinsic factors of high ionic conductivity and reinforcing effect in the meantime. Consequently, the LiFePO4 //Li batteries using self-enhancing GPE show extraordinary cyclic stability over 800 cycles under high current density of 2 C, with a capacity decay of 0.021% per cycle, effectively suppressing the growth of lithium dendrites. This ingenious strategy is expected to manufacture advanced performance and high safety LMBs and compatible with the current battery production.

| S-EPMC8811824 | biostudies-literature

Artificial dual solid-electrolyte interfaces based on in situ organothiol transformation in lithium sulfur battery.

Project description:The interfacial instability of the lithium-metal anode and shuttling of lithium polysulfides in lithium-sulfur (Li-S) batteries hinder the commercial application. Herein, we report a bifunctional electrolyte additive, i.e., 1,3,5-benzenetrithiol (BTT), which is used to construct solid-electrolyte interfaces (SEIs) on both electrodes from in situ organothiol transformation. BTT reacts with lithium metal to form lithium 1,3,5-benzenetrithiolate depositing on the anode surface, enabling reversible lithium deposition/stripping. BTT also reacts with sulfur to form an oligomer/polymer SEI covering the cathode surface, reducing the dissolution and shuttling of lithium polysulfides. The Li-S cell with BTT delivers a specific discharge capacity of 1,239 mAh g-1 (based on sulfur), and high cycling stability of over 300 cycles at 1C rate. A Li-S pouch cell with BTT is also evaluated to prove the concept. This study constructs an ingenious interface reaction based on bond chemistry, aiming to solve the inherent problems of Li-S batteries.

| S-EPMC8163853 | biostudies-literature

Anionic Anchoring Enhanced Quasi Solid Composite Polymer Electrolytes for High Performance Lithium Metal Battery.

Project description:Herein, ZIF-8 inorganic particles with different sized reinforced poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) solid composite polymer electrolytes (PVDF-HFP/10%ZIF-8) were prepared via a facile blade-coating approach, and free-standing quasi solid-state composite electrolytes (PVDF-HFP/10%ZIF-8(0.6)/Plasticizer, abbreviated as PH/10%ZIF-8(0.6)/P), were further obtained through the introduction of plasticizer. Optimized PH/10%ZIF-8(0.6)/P exhibited a high ionic conductivity of 2.8 × 10-4 S cm-1 at 30 °C, and superior Li+ transfer number of 0.89 with an ultrathin thickness (26 µm). Therefore, PH/10%ZIF-8(0.6)/P could effectively inhibit the growth of lithium dendrites, and the assembled Li/LiFePO4 cell delivered good cycling stability with a capacity retention rate of 89.1% after 100 cycles at 0.5 C.

| S-EPMC10748324 | biostudies-literature

Li-Rich Antiperovskite/Nitrile Butadiene Rubber Composite Electrolyte for Sheet-Type Solid-State Lithium Metal Battery.

Project description:Lithium-rich antiperovskites (LiRAPs) hold great promise to be the choice of solid-state electrolytes (SSEs) owing to their high ionic conductivity, low activation energy, and low cost. However, processing sheet-type solid-state Li metal batteries (SSLiB) with LiRAPs remains challenging due to the lack of robust techniques for battery processing. Herein, we propose a scalable slurry-based procedure to prepare a flexible composite electrolyte (CPE), in which LiRAP (e.g., Li2OHCl0.5Br0.5, LOCB) and nitrile butadiene rubber (NBR) serve as an active filler and as a polymer scaffold, respectively. The low-polar solvent helps to stabilize the LiRAP phase during slurry processing. It is found that the addition of LOCB into the NBR polymer enhances the Li ion conductivity for 2.3 times at 60°C and reduces the activation energy (max. 0.07 eV). The as-prepared LOCB/NBR CPE film exhibits an improved critical current of 0.4 mA cm-2 and can stably cycle for over 1000 h at 0.04 mA cm-2 under 60°C. In the SSLiB with the sheet-type configuration of LiFePO4(LFP)||LOCB/NBR CPE||Li, LFP exhibits a capacity of 137 mAh/g under 60 at 0.1°C. This work delivers an effective strategy for fabrication of LiRAP-based CPE film, advancing the LiRAP-family SSEs toward practical applications.

| S-EPMC8634478 | biostudies-literature

Room-Temperature Solid-State Lithium-Ion Battery Using a LiBH4-MgO Composite Electrolyte.

Project description:LiBH4 has been widely studied as a solid-state electrolyte in Li-ion batteries working at 120 °C due to the low ionic conductivity at room temperature. In this work, by mixing with MgO, the Li-ion conductivity of LiBH4 has been improved. The optimum composition of the mixture is 53 v/v % of MgO, showing a Li-ion conductivity of 2.86 × 10-4 S cm-1 at 20 °C. The formation of the composite does not affect the electrochemical stability window, which is similar to that of pure LiBH4 (about 2.2 V vs Li+/Li). The mixture has been incorporated as the electrolyte in a TiS2/Li all-solid-state Li-ion battery. A test at room temperature showed that only five cycles already resulted in cell failure. On the other hand, it was possible to form a stable solid electrolyte interphase by applying several charge/discharge cycles at 60 °C. Afterward, the battery worked at room temperature for up to 30 cycles with a capacity retention of about 80%.

| S-EPMC7903705 | biostudies-literature

Tuning the Properties of a UV-Polymerized, Cross-Linked Solid Polymer Electrolyte for Lithium Batteries.

Project description:Lithium metal anodes have been pursued for decades as a way to significantly increase the energy density of lithium-ion batteries. However, safety risks caused by flammable liquid electrolytes and short circuits due to lithium dendrite formation during cell cycling have so far prevented the use of lithium metal in commercial batteries. Solid polymer electrolytes (SPEs) offer a potential solution if their mechanical properties and ionic conductivity can be simultaneously engineered. Here, we introduce a family of SPEs that are scalable and easy to prepare with a photopolymerization process, synthesized from amphiphilic acrylic polymer conetworks based on poly(ethylene glycol), 2-hydroxy-ethylacrylate, norbornyl acrylate, and either lithium bis (trifluoromethanesulfonyl) imide (LiTFSI) or a single-ion polymethacrylate as lithium-ion source. Several conetworks were synthesized and cycled, and their ionic conductivity, mechanical properties, and lithium transference number were characterized. A single-ion-conducting polymer electrolyte shows the best compromise between the different properties and extends the calendar life of the cell.

| S-EPMC7182867 | biostudies-literature

Microporous Metal-Organic Framework (MOF)-Based Composite Polymer Electrolyte (CPE) Mitigating Lithium Dendrite Formation in All-Solid-State-Lithium Batteries.

Project description:Poly(ethylene oxide) (PEO)-based composite polymer electrolytes (CPEs) containing the amine-functionalized, zirconium-based metal-organic framework @silica (UiO-66-NH2@SiO2) and lithium, LiN(CF3SO2)2 salt (LiTFSI) are prepared using a simple hot press method. The electrochemical properties such as compatibility of the electrolyte with the Li metal anode, Li transference number, and ionic conductivity are investigated for the different systems containing different relative concentrations of the additives. The incorporation of UiO-66-NH2@SiO2 in the PEO-LiTFSI matrix not only enhanced ionic conductivity by one order of magnitude but also offered better compatibility and suppressed the formation of lithium dendrites appreciably. X-ray photoelectron spectroscopy studies on post-cycled materials revealed the formation of lithium alkoxide (RO-Li) on the cathode and Li2O on the anode. The coin cell (2032-type) consisting of LiFePO4/CPE/Li with UiO-66-NH2@SiO2 as filler provided a discharge capacity of 151 mA h g-1 at 0.1 C-rate at 60 °C, measurably higher than control experiments utilizing SiO2 and UiO-66-NH2. The notable enhancement of electrochemical properties when incorporating the UiO-66-NH2@SiO2 at the CPE was attributed to formation of more uniform ion conduction pockets and channels within the PEO matrix, facilitated by the presence of the microporous UiO-66-NH2@SiO2. The enhanced distribution of microporous channels, where Li ions are assumed to percolate through within the matrix, is assumed to desirably reduce formation of Li dendrites by increasing diffusion channels and therefore reducing crystallization and growth of dendrites at the electrode surface.

| S-EPMC7160835 | biostudies-literature

Sulfide solid electrolyte with favorable mechanical property for all-solid-state lithium battery.

Project description:All-solid-state secondary batteries that employ inorganic solid electrolytes are desirable because they are potentially safer than conventional batteries. The ionic conductivities of solid electrolytes are currently attracting great attention. In addition to the conductivity, the mechanical properties of solid electrolytes are important for improving the energy density and cycle performance. However, the mechanical properties of sulfide electrolytes have not been clarified in detail. Here, we demonstrate the unique mechanical properties of sulfide electrolytes. Sulfide electrolytes show room temperature pressure sintering. Ionic materials with low bond energies and a highly covalent character, which is promising for achieving a high ionic conductivity, tend to be suitable for room-temperature processing. The Young's moduli of sulfide electrolytes were measured to be about 20?GPa, which is an intermediate value between those of typical oxides and organic polymers.

| S-EPMC3719077 | biostudies-literature

Lithium-ion conducting oxide single crystal as solid electrolyte for advanced lithium battery application.

Project description:Today, all-solid-state secondary lithium-ion batteries have attracted attention in research and development all over the world as a next-generation energy storage device. A key material for the all-solid-state lithium batteries is inorganic solid electrolyte, including oxide and sulfide materials. Among the oxide electrolytes, garnet-type oxide exhibits the highest lithium-ion conductivity and a wide electrochemical potential window. However, they have major problems for practical realization. One of the major problems is an internal short-circuit in charging and discharging. In the polycrystalline garnet-type oxide electrolyte, dendrites of lithium metal easily grow through the void or impurity in grain boundaries of the sintered body, which causes serious internal short-circuits in the battery system. To solve these problems, we present an all-solid-state battery system using a single-crystal oxide electrolyte. We are the first to successfully grow centimeter-sized single crystals of garnet-type by the floating zone method. The single-crystal solid electrolyte exhibits an extremely high lithium-ion conductivity of 10-3 S cm-1 at 298?K. The garnet-type single-crystal electrolyte has an advantageous bulk nature to realize the bulk conductivity without grain boundaries such as in a sintered polycrystalline body, and will be a game-changing technology for achieving highly safe advanced battery systems.

| S-EPMC6028625 | biostudies-literature