Dataset Information

Air Quality Impacts at an E-Waste Site in Ghana Using Flexible, Moderate-Cost and Quality-Assured Measurements.

ABSTRACT: Air quality information is scarce in low- and middle-income countries. This study describes the application of moderate cost approaches that can provide spatial and temporal information on concentrations of particulate matter (PM) needed to assess community and occupational exposures. We evaluated PM levels at the Agbogbloshie e-waste and scrap yard site in Accra, Ghana, and at upwind and downwind locations, obtaining both optical and gravimetric measurements, local meteorological data and satellite aerosol optical depth. Due to overload issues, the gravimetric 24-hr samplers were modified for periodic sampling and some optical data were screened for quality assurance. Exceptionally high concentrations (e.g., 1-hr average PM10 exceeding 2000 ?g/m3) were sometimes encountered near combustion sources, including open fires at the e-waste site and spoil piles. 24-hr PM2.5 levels averaged 31, 88 and 57 ?g/m3 at upwind, e-waste and downwind sites, respectively, and PM10 averaged 145, 214 and 190 ?g/m3, considerably exceeding air quality standards. Upwind levels likely reflected biomass burning that is prevalent in the surrounding informal settlements; levels at the e-waste and downwind sites also reflected contributions from biomass combustion and traffic. The highest PM levels occurred in evenings, influenced by diurnal changes in emission rates, atmospheric dispersion and wind direction shifts. We demonstrate that moderate cost instrumentation, with some modifications, appropriate data cleaning protocols, and attention to understanding local sources and background levels, can be used to characterize spatial and temporal variation in PM levels in urban and industrial areas.

SUBMITTER: Kwarteng L

PROVIDER: S-EPMC7431652 | biostudies-literature | 2020 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Air Quality Impacts at an E-Waste Site in Ghana Using Flexible, Moderate-Cost and Quality-Assured Measurements.

Kwarteng Lawrencia L Baiden Emmanuel Acquah EA Fobil Julius J Arko-Mensah John J Robins Thomas T Batterman Stuart S

GeoHealth 20200801 8

Air quality information is scarce in low- and middle-income countries. This study describes the application of moderate cost approaches that can provide spatial and temporal information on concentrations of particulate matter (PM) needed to assess community and occupational exposures. We evaluated PM levels at the Agbogbloshie e-waste and scrap yard site in Accra, Ghana, and at upwind and downwind locations, obtaining both optical and gravimetric measurements, local meteorological data and satel ...[more]

PMID: 32832821

Similar Datasets

Project description:Mobile mapping of air pollution has the potential to provide pollutant concentration data at unprecedented spatial scales. Characterizing instrument performance in the mobile context is challenging, but necessary to analyze and interpret the resulting data. We used robust statistical methods to assess mobile platform performance using data collected with the Aclima Inc. mobile air pollution measurement and data acquisition platform installed on three Google Street View cars. They were driven throughout the greater Denver metropolitan area between July 25, 2014 and August 14, 2014, measuring ozone (O3), nitrogen dioxide (NO2), nitric oxide (NO), black carbon (BC), and size-resolve particle number counts (PN) between 0.3 μm and 5.0 μm diameter. August 6, 2014 was dedicated to parked and moving collocations among the three cars, allowing an assessment of measurement precision and bias. We used the median absolute deviation (MAD) to estimate instrument precision from outdoor, parked collocations. Bias was assessed by measurements obtained from parked cars using the standard deviation of median values over a collocated measurement period, as well as by Passing-Bablok regression statistics while the cars were moving and collocated. For the moving collocation periods, we compared the distribution of 1-σ standard deviations among the 3 cars to the estimated distribution assuming only measurement uncertainty (precision and bias). The distribution of mobile measurements agreed well with the theoretical uncertainty distribution at the lower end of the distribution for O3, NO2, and PN. We assert that the difference between the actual and theoretical distributions is due to real spatial variability between pollutants. The agreement between the parked car estimates of uncertainty and that measured during the mobile collocations (at the lower quantiles) provides evidence that on-road collocation while parked could be sufficient for estimating measurement uncertainties of a mobile platform, even when extended to the moving environment.

Project description:This article presents the capabilities and selected measurement results from the newly developed low-cost air pollution measurement system mounted on an unmanned aerial vehicle (UAV). The system is designed and manufactured by the authors and is intended to facilitate, accelerate, and ensure the safety of operators when measuring air pollutants. It allows the creation of three-dimensional models and measurement visualizations, thanks to which it is possible to observe the location of leakage of substances and the direction of air pollution spread by various types of substances. Based on these models, it is possible to create area audits and strategies for the elimination of pollution sources. Thanks to the usage of a multi-socket microprocessor system, the combination of nine different air quality sensors can be installed in a very small device. The possibility of simultaneously measuring several different substances has been achieved at a very low cost for building the sensor unit: 70 EUR. The very small size of this device makes it easy and safe to mount it on a small drone (UAV). Because of this device, many harmful chemical compounds such as ammonia, hexane, benzene, carbon monoxide, and carbon dioxide, as well as flammable substances such as hydrogen and methane, can be detected. Additionally, a very important function is the ability to perform measurements of PM2.5 and PM10 suspended particulates. Thanks to the use of UAV, the measurement is carried out remotely by the operator, which allows us to avoid the direct exposure of humans to harmful factors. A big advantage is the quick measurement of large spaces, at different heights above the ground, in different weather conditions. Because of the three-dimensional positioning from GPS receiver, users can plot points and use colors reflecting a concentration of measured features to better visualize the air pollution. A human-friendly data output can be used to determine the mostly hazardous regions of the sampled area.

Dataset Information

Air Quality Impacts at an E-Waste Site in Ghana Using Flexible, Moderate-Cost and Quality-Assured Measurements.

Publications

Air Quality Impacts at an E-Waste Site in Ghana Using Flexible, Moderate-Cost and Quality-Assured Measurements.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets