Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effects of Plastic Waste on the Heat-Induced Spalling Performance and Mechanical Properties of High Strength Concrete.

ABSTRACT: This paper investigates a potential application of hard-to-recycle plastic waste as polymeric addition in high strength concrete, with a focus on the potential to mitigate heat-induced concrete spalling and the consequent effects on the mechanical properties. The waste corresponds to soft and hard plastic, including household polymers vastly disposed of in landfills, although technically recyclable. Mechanical and physical properties, cracking, mass loss, and the occurrence of spalling were assessed in high strength concrete samples produced with either plastic waste or polypropylene fibers after 2-h exposure to 600 °C. The analysis was supported by Scanning Electron Microscopy and X-Ray Computed Tomography images. The plastic waste is composed of different polymers with a thermal degradation between 250 to 500 °C. Polypropylene (PP) fibers and plastic waste dispersed in concrete have proved to play an essential role in mitigating heat-induced concrete spalling, contributing to the release of internal pressure after the polymer melting. The different morphology of plastic waste and polypropylene fibers leads to distinct mechanisms of action. While the vapor pressure dissipation network originated by polypropylene fibers is related to the formation of continuous channels, the plastic waste seems to cause discontinuous reservoirs and fewer damages into the concrete matrix. The incorporation of plastic waste improved heat-induced concrete spalling performance. While 6 kg/m3 of plastic increased the mechanical performance after exposure to high temperature, the incorporation of 3 kg/m3 resulted in mechanical properties comparable to the reference concrete.

SUBMITTER: Rohden AB

PROVIDER: S-EPMC7435736 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Effects of waste glass and waste marble on mechanical and durability performance of concrete.

Project description:Industrial waste has been rapidly increased day by day because of the fast-growing population which results environmental pollutions. It has been recommended that the disposal of industrial waste would be greatly reduced if it could be incorporated in concrete production. In cement concrete technology, there are many possibilities to use waste materials either as cement replacement or aggregate in concrete production. Two major industrials waste are glass and marble waste. The basic objective of this investigation is to examine the characteristics of concrete waste glass (WG) as binding material in proportions 10%, 20% and 30% by weight of cement. Furthermore, to obtain high strength concrete, waste marble in proportion of 40%, 50% and 60% by weight cement as fine aggregate were used as a filler material to fill the voids between concrete ingredients. Fresh properties were evaluated through slump cone test while mechanical performance was evaluated through compressive strength and split tensile strength which were performed after 7 days, 28 days and 56 days curing. Results show that, workability of concrete decreased with incorporation of waste glass and marble waste. Furthermore, mechanical performance improved considerably up 20% and 50% substitution of waste glass and waste marble respectively. Statistical approach of Response Surface Methodology (RSM) was used optimize both waste materials in concrete. Results indicate better agreement between statistical and experimental results.

| S-EPMC8564529 | biostudies-literature

Properties of Fibrous Concrete Made with Plastic Optical Fibers from E-Waste.

Project description:This article presents research results relating to the potential for waste utilization in the form of polymer optical fiber (POF) scraps. This material is difficult to recycle due to its diverse construction. Three different volumes of POF were used in concrete in these tests: 1%, 2%, and 3%. The experimental studies investigated the basic properties of the concrete, the elastic and dynamic moduli, as well as deformation and deflection of reinforced beams. The microstructures, including the interfacial transition zones (ITZs), were recorded and analyzed using a scanning electron microscope. It was observed that 180 freezing-thawing cycles reduced the concrete frost resistance containing 3% POFs by half compared to the control concrete. The resistance to salt crystallization of this concrete decreased by about 55%. POFs have significant effects on the splitting tensile and flexural strengths compared to the compressive strength. The control beams were destroyed during the four-point static bending tests at half the force applied to the beams that were reinforced with POFs.

| S-EPMC7288338 | biostudies-literature

Mechanical Properties and Durability of Ultra High Strength Concrete Incorporating Multi-Walled Carbon Nanotubes.

Project description:In this work, the effect of the addition of multi-walled carbon nanotubes (MWCNTs) on the mechanical properties and durability of ultra high strength concrete (UHSC) is reported. First, the MWCNTs were dispersed by a nano sand-mill in the presence of a surfactant in water. The UHSC specimens were prepared with various amounts of MWCNTs, ranging from 0% to 0.15% by weight of cement (bwoc). Results indicated that use of an optimal percentage of MWCNTs (0.05% bwoc) caused a 4.63% increase in compressive strength and a 24.0% decrease in chloride diffusion coefficient of UHSC at 28 days curing. Moreover, the addition of MWCNTs also improved the flexural strength and deformation ability. Furthermore, a field-emission scanning electron microscopy (FE-SEM) was used to observe the dispersion of MWCNTs in the cement matrix and morphology of the hardened cement paste containing MWCNTs. FE-SEM observation revealed that MWCNTs were well dispersed in the matrix and no agglomerate was found and the reinforcing effect of MWCNTs on UHSC was thought to be pulling out and microcrack bridging of MWCNTs, which transferred the load in tension.

| S-EPMC5456816 | biostudies-other

Predicting Ultra-High-Performance Concrete Compressive Strength Using Tabular Generative Adversarial Networks.

Project description:There have been abundant experimental studies exploring ultra-high-performance concrete (UHPC) in recent years. However, the relationships between the engineering properties of UHPC and its mixture composition are highly nonlinear and difficult to delineate using traditional statistical methods. There is a need for robust and advanced methods that can streamline the diverse pertinent experimental data available to create predictive tools with superior accuracy and provide insight into its nonlinear materials science aspects. Machine learning is a powerful tool that can unravel underlying patterns in complex data. Accordingly, this study endeavors to employ state-of-the-art machine learning techniques to predict the compressive strength of UHPC using a comprehensive experimental database retrieved from the open literature consisting of 810 test observations and 15 input features. A novel approach based on tabular generative adversarial networks was used to generate 6513 plausible synthetic data for training robust machine learning models, including random forest, extra trees, and gradient boosting regression. While the models were trained using the synthetic data, their ability to generalize their predictions was tested on the 810 experimental data thus far unknown and never presented to the models. The results indicate that the developed models achieved outstanding predictive performance. Parametric studies using the models were able to provide insight into the strength development mechanisms of UHPC and the significance of the various influential parameters.

| S-EPMC7663629 | biostudies-literature

Mechanical Properties and Seismic Performance of Wood-Concrete Composite Blocks for Building Construction.

Project description:Recent catastrophes that occurred during seismic events suggest the importance of developing new seismic-resistant materials for use in building construction. Ordinary concrete is one of the most common materials in buildings. However, due to its low ductility and flexural strength, its seismic behavior can be improved upon by different additives. In this regard, wood-concrete composites exhibit desirable structural properties not achievable by either wood or concrete alone, making it an interesting material from a seismic point of view. This work analyzes and compares the performance of blocks built with ordinary concrete versus blocks built using different wood additives (sawdust and wood shavings). This includes the construction of concrete blocks in a lab, determination of their construction and seismic-resistant properties, as well as an analysis of their performance in buildings with a different number of storeys. The results show how blocks with wood aggregates comply with current regulations for structural materials in a seismic country like Chile, while also considerably outperforming traditional concrete blocks in the event of an earthquake.

| S-EPMC6539851 | biostudies-literature

Biomineralization of Plastic Waste to Improve the Strength of Plastic-Reinforced Cement Mortar.

Project description:The development of methods to reuse large volumes of plastic waste is essential to curb the environmental impact of plastic pollution. Plastic-reinforced cementitious materials (PRCs), such as plastic-reinforced mortar (PRM), may be potential avenues to productively use large quantities of low-value plastic waste. However, poor bonding between the plastic and cement matrix reduces the strength of PRCs, limiting its viable applications. In this study, calcium carbonate biomineralization techniques were applied to coat plastic waste and improved the compressive strength of PRM. Two biomineralization treatments were examined: enzymatically induced calcium carbonate precipitation (EICP) and microbially induced calcium carbonate precipitation (MICP). MICP treatment of polyethylene terephthalate (PET) resulted in PRMs with compressive strengths similar to that of plastic-free mortar and higher than the compressive strengths of PRMs with untreated or EICP-treated PET. Based on the results of this study, MICP was used to treat hard-to-recycle types 3-7 plastic waste. No plastics investigated in this study inhibited the MICP process. PRM samples with 5% MICP-treated polyvinyl chloride (PVC) and mixed type 3-7 plastic had compressive strengths similar to plastic-free mortar. These results indicate that MICP treatment can improve PRM strength and that MICP-treated PRM shows promise as a method to reuse plastic waste.

| S-EPMC8069578 | biostudies-literature

Properties and Microstructure Distribution of High-Performance Thermal Insulation Concrete.

Project description:The aim of this experimental study is to develop high strength and lightweight concrete mixture suitable for structural applications. This work investigates the effect of replacing normal aggregate either partially or totally with expanded perlite aggregate. This material allows for better thermal insulation properties, thus decreasing the energy usage within the life cycle of the concrete structure. Expanded perlite aggregate was used in concrete by 20%, 40%, 60%, 80%, and 100% in replacement of the natural aggregate. Material characterization tests of compressive strength, flexural strength, and thermal conductivity were carried out for six concrete mixtures. In addition, microstructure analysis was performed with the aid of a micro-computed tomography system to investigate the effects and relation of microstructure quantities on material properties. The proposed concrete mixture, which has 100% of expanded perlite aggregate, has a unit weight of 1703 kg/m3 and achieved reduction percentage of thermal conductivity around 62% (1.81 to 0.69 W·m-1·K-1) and a compressive strength of 42 MPa at 28 days; and thus is ideal for structural applications with enhanced properties.

| S-EPMC7254280 | biostudies-literature

Beyond Mechanical Recycling: Giving New Life to Plastic Waste.

Project description:Increasing the stream of recycled plastic necessitates an approach beyond the traditional recycling via melting and re-extrusion. Various chemical recycling processes have great potential to enhance recycling rates. In this Review, a summary of the various chemical recycling routes and assessment via life-cycle analysis is complemented by an extensive list of processes developed by companies active in chemical recycling. We show that each of the currently available processes is applicable for specific plastic waste streams. Thus, only a combination of different technologies can address the plastic waste problem. Research should focus on more realistic, more contaminated and mixed waste streams, while collection and sorting infrastructure will need to be improved, that is, by stricter regulation. This Review aims to inspire both science and innovation for the production of higher value and quality products from plastic recycling suitable for reuse or valorization to create the necessary economic and environmental push for a circular economy.

| S-EPMC7497176 | biostudies-literature

Comparative analysis of various machine learning algorithms to predict strength properties of sustainable green concrete containing waste foundry sand.

Project description:The use of waste foundry sand (WFS) in concrete production has gained attention as an eco-friendly approach to waste reduction and enhancing cementitious materials. However, testing the impact of WFS in concrete through experiments is costly and time-consuming. Therefore, this study employs machine learning (ML) models, including support vector regression (SVR), decision tree (DT), and AdaBoost regressor (AR) ensemble model to predict concrete properties accurately. Moreover, SVR was employed in conjunction with three robust optimization algorithms: the firefly algorithm (FFA), particle swarm optimization (PSO), and grey wolf optimization (GWO), to construct hybrid models. Using 397 experimental data points for compressive strength (CS), 146 for elastic modulus (E), and 242 for split tensile strength (STS), the models were evaluated with statistical metrics and interpreted using the SHapley Additive exPlanation (SHAP) technique. The SVR-GWO hybrid model demonstrated exceptional accuracy in predicting waste foundry sand concrete (WFSC) strength characteristics. The SVR-GWO hybrid model exhibited correlation coefficient values (R) of 0.999 for CS and E, and 0.998 for STS. Age was found to be a significant factor influencing WFSC properties. The ensemble model (AR) also exhibited comparable prediction accuracy to the SVR-GWO model. In addition, SHAP analysis revealed an optimal content of input variables in the concrete mix. Overall, the hybrid and ensemble models showed exceptional prediction accuracy compared to individual models. The application of these sophisticated soft computing prediction techniques holds the potential to stimulate the widespread adoption of WFS in sustainable concrete production, thereby fostering waste reduction and bolstering the adoption of environmentally conscious construction practices.

| S-EPMC11199582 | biostudies-literature

Investigation on factors affecting early strength of high-performance concrete by Gaussian Process Regression.

Project description:This study aims to investigate the influence of all the mixture components of high-performance concrete (HPC) on its early compressive strength, ranging from 1 to 14 days. To this purpose, a Gaussian Process Regression (GPR) algorithm was first constructed using a database gathered from the available literature. The database included the contents of cement, blast furnace slag (BFS), fly ash (FA), water, superplasticizer, coarse, fine aggregates, and testing age as input variables to predict the output of the problem, which was the early compressive strength. Several standard statistical criteria, such as the Pearson correlation coefficient, root mean square error and mean absolute error, were used to quantify the performance of the GPR model. To analyze the sensitivity and influence of the HPC mixture components, partial dependence plots analysis was conducted with both one-dimensional and two-dimensional. Firstly, the results showed that the GPR performed well in predicting the early strength of HPC. Second, it was determined that the cement content and testing age of HPC were the most sensitive and significant elements affecting the early strength of HPC, followed by the BFS, water, superplasticizer, FA, fine aggregate, and coarse aggregate contents. To put it simply, this research might assist engineers select the appropriate amount of mixture components in the HPC production process to obtain the necessary early compressive strength.

| S-EPMC8794196 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data