Dataset Information

Reactive Materials in the Removal of Phosphorus Compounds from Wastewater-A Review.

ABSTRACT: Modern technologies designed to treat wastewater containing phosphorus compounds are based on the processes of adsorption and precipitation. In addition, more environmentally friendly and cheaper materials are being sought to ensure greater conformity with overarching assumptions of green chemistry and sustainable development. Against that background, this paper offers a review and analysis of available information on the considered reactive materials that have the capacity to remove phosphorus from wastewater. These materials are categorised as natural (with a sub-division in line with the dominant sorption groups of Al/Fe or Ca/Mg), waste, or man-made. Notably, most studies on sorbents have been carried out in laboratory systems via experimentation under static conditions. Among the natural materials, opoka has the highest sorption capacity of 181.20 g P/kg, while red mud (in the waste material category) is most efficient at binding phosphorus with a level of 345.02 g P/kg. Finally, among the group of commercial materials, Rockfos® has the highest sorption capacity of 256.40 g P/kg. In addition, this paper recognises the effect of composition, pH, and physical properties on a reactive material's capacity to absorb phosphorus, as well as the possibility for further potential use in the production of fertilisers.

SUBMITTER: Gubernat S

PROVIDER: S-EPMC7435924 | biostudies-literature | 2020 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Reactive Materials in the Removal of Phosphorus Compounds from Wastewater-A Review.

Gubernat Sylwia S Masłoń Adam A Czarnota Joanna J Koszelnik Piotr P

Materials (Basel, Switzerland) 20200730 15

Modern technologies designed to treat wastewater containing phosphorus compounds are based on the processes of adsorption and precipitation. In addition, more environmentally friendly and cheaper materials are being sought to ensure greater conformity with overarching assumptions of green chemistry and sustainable development. Against that background, this paper offers a review and analysis of available information on the considered reactive materials that have the capacity to remove phosphorus ...[more]

PMID: 32751535

Similar Datasets

Project description:We report, for the first time, extensive biologically mediated phosphate removal from wastewater during high-rate anaerobic digestion (AD). A hybrid sludge bed/fixed-film (packed pumice stone) reactor was employed for low-temperature (12°C) anaerobic treatment of synthetic sewage wastewater. Successful phosphate removal from the wastewater (up to 78% of influent phosphate) was observed, mediated by biofilms in the reactor. Scanning electron microscopy and energy dispersive X-ray analysis revealed the accumulation of elemental phosphorus (∼2%) within the sludge bed and fixed-film biofilms. 4', 6-diamidino-2-phenylindole (DAPI) staining indicated phosphorus accumulation was biological in nature and mediated through the formation of intracellular inorganic polyphosphate (polyP) granules within these biofilms. DAPI staining further indicated that polyP accumulation was rarely associated with free cells. Efficient and consistent chemical oxygen demand (COD) removal was recorded, throughout the 732-day trial, at applied organic loading rates between 0.4 and 1.5 kg COD m(-3) d(-1) and hydraulic retention times of 8-24 h, while phosphate removal efficiency ranged from 28 to 78% on average per phase. Analysis of protein hydrolysis kinetics and the methanogenic activity profiles of the biomass revealed the development, at 12°C, of active hydrolytic and methanogenic populations. Temporal microbial changes were monitored using Illumina MiSeq analysis of bacterial and archaeal 16S rRNA gene sequences. The dominant bacterial phyla present in the biomass at the conclusion of the trial were the Proteobacteria and Firmicutes and the dominant archaeal genus was Methanosaeta. Trichococcus and Flavobacterium populations, previously associated with low temperature protein degradation, developed in the reactor biomass. The presence of previously characterized polyphosphate accumulating organisms (PAOs) such as Rhodocyclus, Chromatiales, Actinobacter, and Acinetobacter was recorded at low numbers. However, it is unknown as yet if these were responsible for the luxury polyP uptake observed in this system. The possibility of efficient phosphate removal and recovery from wastewater during AD would represent a major advance in the scope for widespread application of anaerobic wastewater treatment technologies.

Project description:Dual upflow reactive filtration by a slowly moving sand bed with continuously renewed, hydrous ferric oxide-coated sand is used for removing polluting substances and for meeting the ultralow 0.05 mg/l total phosphorus discharge permit limits at a 1.2 million liters per day (0.32 million gallons per day) water resource recovery facility in Plummer, Idaho, in the United States. A life cycle assessment (LCA) of this reactive filtration installation was carried out to assess the environmental hotspots in the system and analyze alternative system configurations with a focus on CO2 equivalent (CO2 e) global warming potential, freshwater and marine eutrophication, and mineral resource scarcity. "What if" scenarios with alternative inputs for the energy, metal salts, and air compressor optimization show trade-offs between the impact categories. Key results that show a comparative reduction of global warming potential include the use of Fe versus Al metal salts, the use of renewable energy, and the energy efficiency benefit of optimizing process inputs, such as compressor air pressure, to match operational demand. The LCA shows a 2 × 10-2 kg CO2 e footprint per cubic meter of water, with 47% from housing concrete, and an overall freshwater eutrophication impact reduced by 99% versus no treatment. The use of renewable hydropower energy at this site isolates construction concrete as a target for lowering the CO2 e footprint. PRACTITIONER POINTS: The main LCA eco-impact hotspots in this dual reactive filtration tertiary treatment are construction concrete and the ferric sulfate used. Iron salts show smaller impact in global warming, freshwater eutrophication, and mineral resource scarcity than "what if scenario" aluminum salts. The energy mix for this site is predominantly hydropower; other energy mix "what if" scenarios show larger impacts. Operational energy efficiency and thermodynamic analysis show that fine tuning the air compressor helps reduce carbon footprint and energy use. LCA shows a favorable 2 x 10-2 kg CO2e/m3 water impact with 99% reduction of freshwater eutrophication potential versus no treatment.

Project description:Currently, a serious threat for living organisms and human life in particular, is water contamination with persistent organic and inorganic pollutants. To date, several techniques have been adopted to remove/treat organics and toxic contaminants. Adsorption is one of the most effective and economical methods for this purpose. Generally, porous materials are considered as appropriate adsorbents for water purification. Conventional adsorbents such as activated carbons have a limited possibility of surface modification (texture and functionality), and their adsorption capacity is difficult to control. Therefore, despite the significant progress achieved in the development of the systems for water remediation, there is still a need for novel adsorptive materials with tunable functional characteristics. This review addresses the new trends in the development of new adsorbent materials. Herein, modern carbon-based materials, such as graphene, oxidized carbon, carbon nanotubes, biomass-derived carbonaceous matrices-biochars as well as their composites with metal-organic frameworks (MOFs) and MOF-derived highly-ordered carbons are considered as advanced adsorbents for removal of hazardous organics from drinking water, process water, and leachate. The review is focused on the preparation and modification of these next-generation carbon-based adsorbents and analysis of their adsorption performance including possible adsorption mechanisms. Simultaneously, some weak points of modern carbon-based adsorbents are analyzed as well as the routes to conquer them. For instance, for removal of large quantities of pollutants, the combination of adsorption and other methods, like sedimentation may be recommended. A number of efficient strategies for further enhancing the adsorption performance of the carbon-based adsorbents, in particular, integrating approaches and further rational functionalization, including composing these adsorbents (of two or even three types) can be recommended. The cost reduction and efficient regeneration must also be in the focus of future research endeavors. The targeted optimization of the discussed carbon-based adsorbents associated with detailed studies of the adsorption process, especially, for multicomponent adsorbate solution, will pave a bright avenue for efficient water remediation.

Dataset Information

Reactive Materials in the Removal of Phosphorus Compounds from Wastewater-A Review.

Publications

Reactive Materials in the Removal of Phosphorus Compounds from Wastewater-A Review.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets