High-performance pan-tactic polythioesters with intrinsic crystallinity and chemical recyclability.
Ontology highlight
ABSTRACT:
SUBMITTER: Shi C
PROVIDER: S-EPMC7438104 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Long-life and self-powered betavoltaic batteries are extremely attractive for many fields that require a long-term power supply, such as space exploration, polar exploration, and implantable medical technology. Organic lead halide perovskites are great potential candidate materials for betavoltaic batteries due to the large attenuation coefficient and the long carrier diffusion length, which guarantee the scale match between the penetration depth of β particles and the carrier diffusion length. However, the performance of perovskite betavoltaics is limited by the fabrication process of the thick and high-crystallinity perovskite film. In this work, we demonstrated high-performance perovskite betavoltaic cells using thick, high-quality, and wide-band-gap MAPbBr3 polycrystalline films. The solvent annealing method was adopted to improve the crystallinity and eliminate the pinholes in the MAPbBr3 film. The optimal MAPbBr3 betavoltaic cell achieved a power conversion efficiency (PCE) of 5.35% and a maximum output power of 1.203 μW under radiation of electrons of 15 keV with an equivalent activity of 253 mCi. These results are a nearly 50% improvement from previous reports. Effects of the MAPbBr3 perovskite layer thickness on the device performance were also discussed. The mechanisms of film-growth processes and device physics could provide insights for the research community of perovskites and betavoltaics.
| S-EPMC8340384 | biostudies-literature
Project description:Seminal fluid often makes up a large part of an ejaculate, yet most empirical and theoretical studies on sperm competition have focused on how sperm characteristics (number and quality) affect fertilization success. However, seminal fluid influences own sperm performance and may potentially influence the outcome of sperm competition, by also affecting that of rivals. As a consequence males may be expected to allocate their investment in both sperm and seminal fluid in relation to the potential level of competition. Grass goby (Zosterisessor ophiocephalus) is an external fertilizer with guard-sneaker mating tactics, where sperm competition risk varies according to the tactic adopted. Here, we experimentally manipulated grass goby ejaculates by separately combining sperm and seminal fluid from territorial and sneaker males. While sperm of sneaker and territorial males did not differ in their performance when they interacted with their own seminal fluid only, sperm of sneakers increased their velocity and fertilization rate in the presence of territorial males' seminal fluid. By contrast, sneaker males' seminal fluid had a detrimental effect on the performance of territorial males' sperm. Sperm velocity was unaffected by the seminal fluid of males employing the same tactic, suggesting that seminal fluid's effect on rival-tactic sperm is not based on a self/non-self recognition mechanism. Our findings show that cross interactions of sperm and seminal fluid may influence the fertilization success of competing ejaculates with males investing in both sperm and seminal fluid in response to sperm competition risk.
| S-EPMC3574395 | biostudies-literature
Project description:Plastics have become indispensable in modern life and the material of choice in packaging applications, but they have also caused increasing plastic waste accumulation in oceans and landfills. Although there have been continuous efforts to develop biodegradable plastics, the mechanical and/or transport properties of these materials still need to be significantly improved to be suitable for replacing conventional plastic packaging materials. Here we report a class of biorenewable and degradable plastics, based on copolymers of ?-butyrolactone and its ring-fused derivative, with competitive permeability and elongation at break compared to commodity polymers and superior mechanical and transport properties to those of most promising biobased plastics. Importantly, these materials are designed with full chemical recyclability built into their performance with desired mechanical and barrier properties, thus representing a circular economy approach to plastic packaging materials.
| S-EPMC6687705 | biostudies-literature
Project description:Micro-electromechanical systems (MEMS) have reduced drastically in size, cost, and power consumption, while improving accuracy. The combination of different sensor technologies is considered a promising step in the monitoring of athletes. Those "wearables" enable the capturing of relevant physiological and tactical information in individual and team sports and thus replacing subjective, time-consuming and qualitative methods with objective, quantitative ones. Prior studies mainly comprised sports categories such as: targeting sports, batting and fielding games as well as net and wall games, focusing on the detection of individual, non-locomotive movements. The increasing capabilities of wearables allow for more complex and integrative analysis expanding research into the last category: invasion sports. Such holistic approaches allow the derivation of metrics, estimation of physical conditions and the analysis of team strategic behavior, accompanied by integrative knowledge gains in technical, tactical, physical, and mental aspects of a sport. However, prior and current researchers find the precise measurement of the actual movement within highly dynamic and non-linear movement difficult. Thus, the present article showcases an overview of the environments in which the wearables are employed. It elaborates their use in individual as well as team-related performance analyses with a special focus on reliability and validity, challenges, and future directions.
| S-EPMC6981928 | biostudies-literature
Project description:Recyclable concrete pavement was made from fly ash and crushed limestone sand and gravel as aggregates so that the concrete pavement could be recycled to raw materials for cement production. With the aim to use as much fly ash as possible for the sustainable development of society, while achieving adequate strength development, pavement concrete having a cement-replacement ratio of 40% by mass was experimentally investigated, focusing on the strength development at an early age. Limestone powder was added to improve the early strength; flexural strength at two days reached 3.5 MPa, the minimum strength for traffic service in Japan. The matured fly ash concrete made with a cement content of 200 kg/m3 achieved a flexural strength almost equal to that of the control concrete without fly ash. Additionally, Portland cement made from the tested fly ash concrete was tested to confirm recyclability, with the cement quality meeting the Japanese classification of ordinary Portland cement. Limestone-based recyclable fly ash concrete pavement is, thus, a preferred material in terms of sustainability.
| S-EPMC5455502 | biostudies-other
Project description:High-efficiency thermoelectric materials require simultaneously high power factors and low thermal conductivities. Aligning band extrema to achieve high band degeneracy, as realized in PbTe, is one of the most efficient approaches to enhance power factor. However, this approach usually relies on band structure engineering, e.g., via chemical doping or strain. By employing first-principles methods with explicit computation of phonon and carrier lifetimes, here we show two full-Heusler compounds Li2TlBi and Li2InBi have exceptionally high power factors and low lattice thermal conductivities at room temperature. The expanded rock-salt sublattice of these compounds shifts the valence band maximum to the middle of the ? line, increasing the band degeneracy by a factor of three. Meanwhile, resonant bonding in the PbTe-like sublattice and soft Tl-Bi (In-Bi) bonding interaction is responsible for intrinsic low lattice thermal conductivities. Our results present an alternative strategy of designing high performance thermoelectric materials.
| S-EPMC6372688 | biostudies-literature
Project description:Circulating exosomes in bodily fluids such as blood are being actively studied as a rich source of chemical biomarkers for cancer diagnosis and monitoring. Although nucleic acid analysis is a primary tool for the discovery of circulating biomarkers in exosomes, metabolomics holds the potential of expanding the chemical diversity of biomarkers that may be easy and rapid to detect. However, only trace amounts of exosomes can be isolated from a small volume of patient blood, and thus a very sensitive technique is required to analyze the metabolome of exosomes. In this report, we present a workflow that involves multiple cycles of ultracentrifugation for exosome isolation using a starting material of 2 mL of human serum, freeze-thaw-cycles in 50% methanol/water for exosome lysis and metabolite extraction, differential chemical isotope labeling (CIL) of metabolites for enhancing liquid chromatography (LC) separation and improving mass spectrometry (MS) detection, and nanoflow LC-MS (nLC-MS) with captivespray for analysis. As a proof-of-principle, we used dansylation labeling to analyze the amine- and phenol-submetabolomes in two sets of exosome samples isolated from the blood samples of five pancreatic cancer patients before and after chemotherapy treatment. The average number of peak pairs or metabolites detected was 1964 ± 60 per sample for a total of 2446 peak pairs ( n = 10) in the first set and 1948 ± 117 per sample for a total of 2511 peak pairs ( n = 10) in the second set. There were 101 and 94 metabolites positively identified in the first and second set, respectively, and 1580 and 1590 peak pairs with accurate masses matching those of metabolites in the MyCompoundID metabolome database. Analyzing the mixtures of 12C-labeled individual exosome samples spiked with a 13C-labeled pooled sample which served as an internal standard allowed relative quantification of metabolomic changes of exosomes of blood samples collected before and after treatment.
| S-EPMC6058730 | biostudies-literature
Project description:Site-specific DNA recombinases are important genome engineering tools. Chemical- and light-inducible recombinases, in particular, enable spatiotemporal control of gene expression. However, inducible recombinases are scarce due to the challenge of engineering high performance systems, thus constraining the sophistication of genetic circuits and animal models that can be created. Here we present a library of >20 orthogonal inducible split recombinases that can be activated by small molecules, light and temperature in mammalian cells and mice. Furthermore, we engineer inducible split Cre systems with better performance than existing systems. Using our orthogonal inducible recombinases, we create a genetic switchboard that can independently regulate the expression of 3 different cytokines in the same cell, a tripartite inducible Flp, and a 4-input AND gate. We quantitatively characterize the inducible recombinases for benchmarking their performances, including computation of distinguishability of outputs. This library expands capabilities for multiplexed mammalian gene expression control.
| S-EPMC6813296 | biostudies-literature
Project description:Graphene has been considered as an excellent channel material for constructing magnetic sensors or Hall elements with high sensitivity and linearity. Compared to intensively reported graphene Hall elements (GHEs) fabricated on monolayer graphene, the exploration on bilayer graphene-based Hall elements is very rare. Here, we first investigate the performance and potential of Hall elements built on chemical vapor deposition-grown bilayer graphene. Without applying any gate voltage, the bilayer GHEs exhibit a typical voltage sensitivity of 119 mV/VT and current sensitivity of 397 V/AT, which are higher than those in the monolayer GHEs, indicating the better performance in practical applications. Moreover, the bilayer GHEs present obviously lower noise and then the minimum detection magnetic field compared to the monolayer ones. Hall elements built on bilayer graphene show certain unique advantages and can be used as an important supplement to mainstreaming monolayer GHEs.
| S-EPMC9330160 | biostudies-literature
Project description:An effective strategy to overcome the morphology evolution of hematite nanorods under high-temperature activation is presented, via tuning the crystallinity and sintering temperature by substrate modification. It is demonstrated that the as-prepared doping-free hematite nanorods with fine nanostructures obtain a significantly higher photocurrent density of 2.12 mA cm-2 at 1.23 V versus RHE, due to effective charge separation and transfer.
| S-EPMC5016786 | biostudies-literature