Dataset Information

Experimental and Statistical Investigation of Reservoir Properties with the Effect of Waterflooding Treatment.

ABSTRACT: An oilfield reservoir over long-term operation may have different petrophysical information, which has a significant impact on oilfield maintenance and finance. Successful oilfield enhanced oil recovery benefits a lot from identifying and analyzing the variations of the critical properties after long-term waterflooding treatments. Since the inspection wells drilled within different development periods contain the core samples that have the petrophysical information at that period, it is necessary to collect and test the samples from different periods to investigate the overall tendency of the petrophysical properties. The samples from four inspection wells, which were drilled in four stages since the very beginning of development, were subjected to in-laboratory core analysis methods to illustrate the variation of some critical parameters in the reservoir. The permeability and porosity variation are revealed clearly by the experimental results. The migration and dissolution of clay minerals play a crucial role in the variation of petrophysical information and pore structure. To quantify the variations above, we applied the multiple linear regression model into our investigation. The dependent variable and all of the predictors in the model come from the experimental results. The quantitative results show the closed correlation between different parameters in the formation. With the development stage moving forward, the weight coefficients for different predictors have multiple trends. The experimental and statistical approach provides a novel understanding of the reservoir properties with the effect of waterflooding treatment.

SUBMITTER: Li Z

PROVIDER: S-EPMC7450616 | biostudies-literature | 2020 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Experimental and Statistical Investigation of Reservoir Properties with the Effect of Waterflooding Treatment.

Li Zihao Z Du Chenguang C Tang Yongqiang Y Li Xiangming X

ACS omega 20200811 33

An oilfield reservoir over long-term operation may have different petrophysical information, which has a significant impact on oilfield maintenance and finance. Successful oilfield enhanced oil recovery benefits a lot from identifying and analyzing the variations of the critical properties after long-term waterflooding treatments. Since the inspection wells drilled within different development periods contain the core samples that have the petrophysical information at that period, it is necessar ...[more]

PMID: 32875227

Similar Datasets

Project description:Enhanced oil processing aims to retrieve petroleum fluids from depleted reservoirs after traditional processing. Hydrogels and polymeric macromolecules are considered effective displacing agents in oil reservoirs. In the current work, the authors used hydrophilic hydrogels based on poly(ethylene glycol)/poly(propylene glycol) (PEG/PPG) surfmers for oil displacement processes. Statistical modeling of the rheological properties at 80 °C for the two hydrogels indicates that the viscosity-shearing profile obeys the power-law model. Also, shear stress scanning follows the Herschel-Bulkley and the Bingham plastic models. The two hydrogels exhibit an initial yield stress owing to the formation of a three-dimensional (3D) structure at zero shearings. Furthermore, PEG and PPG hydrogels can retain the viscosity after a shear rate of 64.68 S-1. On the scale of surface activity, the two hydrogels exhibit higher surface areas (A m) of 0.1088 and 0.1058 nm2 and lower surface excess concentrations (Γm) of 1.529 and 1.567 × 1010 mol/cm2, respectively. A molecular dynamics (MD) simulation was conducted to explore the Flory-Huggins chi parameter, the solubility parameter, and the cohesive energy density. The results indicate a negative magnitude of chi parameter (χ ij ) for water and salt, which indicates that the two hydrogels have a good tendency toward saline formation water in the underground petroleum reservoir. Furthermore, the dissipative particle dynamics (DPD) was performed on a mesoscale to investigate the interfacial tension, the radius of gyration, the concentration profile, and the radial distribution function. The increased radius of gyration (R g) confirms that the two hydrogels are more overextended and can align perpendicularly toward the water/oil boundary. Experimental displacement was operated on a linear sandpack model using different slug concentrations. The oil recovery factor, the water-cut, and the differential pressure data during the flooding process were estimated as a function of the injected pore volume. The obtained results show that the oil recovery factor reaches 72 and 88% in the cases of PEG and PPG hydrogels at 80 °C with concentrations of 1.0 and 1.5 g/L, which reveals that both hydrogels are effective enhanced oil recovery (EOR) agents for the depleted reservoirs. This study establishes a new route that employs MD and DPD simulation in the field of enhanced oil recovery and the petroleum industry.

Project description:Air compliance has been used effectively to stabilize fluidic instability resulting from a syringe pump. It has also been employed to measure blood viscosity under constant shearing flows. However, due to a longer time delay, it is difficult to quantify the aggregation of red blood cells (RBCs) or blood viscoelasticity. To quantify the mechanical properties of blood samples (blood viscosity, RBC aggregation, and viscoelasticity) effectively, it is necessary to quantify contributions of air compliance to dynamic blood flows in microfluidic channels. In this study, the effect of air compliance on measurement of blood mechanical properties was experimentally quantified with respect to the air cavity in two driving syringes. Under periodic on-off blood flows, three mechanical properties of blood samples were sequentially obtained by quantifying microscopic image intensity (<I>) and interface (?) in a co-flowing channel. Based on a differential equation derived with a fluid circuit model, the time constant was obtained by analyzing the temporal variations of ? = 1/(1-?). According to experimental results, the time constant significantly decreased by securing the air cavity in a reference fluid syringe (~0.1 mL). However, the time constant increased substantially by securing the air cavity in a blood sample syringe (~0.1 mL). Given that the air cavity in the blood sample syringe significantly contributed to delaying transient behaviors of blood flows, it hindered the quantification of RBC aggregation and blood viscoelasticity. In addition, it was impossible to obtain the viscosity and time constant when the blood flow rate was not available. Thus, to measure the three aforementioned mechanical properties of blood samples effectively, the air cavity in the blood sample syringe must be minimized (Vair, R = 0). Concerning the air cavity in the reference fluid syringe, it must be sufficiently secured about Vair, R = 0.1 mL for regulating fluidic instability because it does not affect dynamic blood flows.

Project description:Biomechanical and morphological analysis of the cells is a novel approach for monitoring the environmental features, drugs, and toxic compounds' effects on cells. Graphene oxide (GO) has a broad range of medical applications such as tissue engineering and drug delivery. However, the effects of GO nanosheets on biological systems have not been completely understood. In this study, we focused on the biophysical characteristics of cells and their changes resulting from the effect of GO nanosheets. The biophysical properties of the cell population were characterized as follows: cell stiffness was calculated by atomic force microscopy, cell motility and invasive properties were characterized in the microfluidic chip in which the cells are able to visualize cell migration at a single-cell level. Intracellular actin was stained to establish a quantitative picture of the intracellular cytoskeleton. In addition, to understand the molecular interaction of GO nanosheets and actin filaments, coarse-grained (CG) molecular dynamics (MD) simulations were carried out. Our results showed that GO nanosheets can reduce cell stiffness in MCF7 cells and MDA-MB-231 cell lines and highly inhibited cell migration (39.2%) in MCF-7 and (38.6%) in MDA-MB-231 cell lines through the GO nanosheets-mediated disruption of the intracellular cytoskeleton. In the presence of GO nanosheets, the cell migration of both cell lines, as well as the cell stiffness, significantly decreased. Moreover, after GO nanosheets treatment, the cell actin network dramatically changed. The experimental and theoretical approaches established a quantitative picture of changes in these networks. Our results showed the reduction of the order parameter in actin filaments was 23% in the MCF7 cell line and 20.4% in the MDA-MB-231 cell line. The theoretical studies also showed that the GO nanosheet-actin filaments have stable interaction during MD simulation. Moreover, the 2D free energy plot indicated the GO nanosheet can induce conformational changes in actin filaments. Our findings showed that the GO nanosheets can increase the distance of actin-actin subunits from 3.22 to 3.5 nm and in addition disrupt native contacts between two subunits which lead to separate actin subunits from each other in actin filaments. In this study, the biomechanical characteristics were used to explain the effect of GO nanosheets on cells which presents a novel view of how GO nanosheets can affect the biological properties of cells without cell death. These findings have the potential to be applied in different biomedical applications.

Dataset Information

Experimental and Statistical Investigation of Reservoir Properties with the Effect of Waterflooding Treatment.

Publications

Experimental and Statistical Investigation of Reservoir Properties with the Effect of Waterflooding Treatment.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets