Dataset Information

Comparison of three different bioleaching systems for Li recovery from lepidolite.

ABSTRACT: Three different biological systems, the consortium of autotrophic bacteria Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans, heterotrophic fungus Aspergillus niger and heterotrophic yeast Rhodotorula mucilaginosa, were investigated for lithium extraction from lepidolite. The bacterial consortium was the most effective, 11 mg l^-1 of Li was dissolved in the absence of nutrients within 336 days. Fungal and yeast bioleaching was faster (40 days), however, with lower extraction efficiency. Bioaccumulation represented a main process of Li extraction by R. mucilaginosa and A. niger, with 92 and 77% of total extracted Li accumulated in the biomass, respectively. The X-ray diffraction analysis for bioleaching residue indicated changes caused by microorganisms, however, with differences between bacterial leaching and bioleaching by fungi or yeasts. The final bioleaching yields for bacterial consortium, A. niger and R. mucilaginosa were 8.8%, 0.2% and 1.1%, respectively. Two-step bioleaching using heterotrophic organisms followed by autotrophic bioleaching could lead to the increase of the process kinetics and efficiency. Bioaccumulation of Li offers strong advantage in Li extraction from solution.

SUBMITTER: Sedlakova-Kadukova J

PROVIDER: S-EPMC7471267 | biostudies-literature | 2020 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Comparison of three different bioleaching systems for Li recovery from lepidolite.

Sedlakova-Kadukova J J Marcincakova R R Luptakova A A Vojtko M M Fujda M M Pristas P P

Scientific reports 20200903 1

Three different biological systems, the consortium of autotrophic bacteria Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans, heterotrophic fungus Aspergillus niger and heterotrophic yeast Rhodotorula mucilaginosa, were investigated for lithium extraction from lepidolite. The bacterial consortium was the most effective, 11 mg l<sup>-1</sup> of Li was dissolved in the absence of nutrients within 336 days. Fungal and yeast bioleaching was faster (40 days), however, with lower extrac ...[more]

PMID: 32884068

Similar Datasets

Project description:In the actual mining scenario, copper bioleaching, mainly raw mined material known as run-of-mine (ROM) copper bioleaching, is the best alternative for the treatment of marginal resources that are not currently considered part of the profitable reserves because of the cost associated with leading technologies in copper extraction. It is foreseen that bioleaching will play a complementary role in either concentration-as it does in Minera Escondida Ltd. (MEL)-or chloride main leaching plants. In that way, it will be possible to maximize mines with installed solvent-extraction and electrowinning capacities that have not been operative since the depletion of their oxide ores. One of the main obstacles for widening bioleaching technology applications is the lack of knowledge about the key events and the attributes of the technology's critical events at the industrial level and mainly in ROM copper bioleaching industrial operations. It is relevant to assess the bed environment where the bacteria-mineral interaction occurs to learn about the limiting factors determining the leaching rate. Thus, due to inability to accurately determine in-situ key variables, their indirect assessment was evaluated by quantifying microbial metabolic-associated responses. Several candidate marker genes were selected to represent the predominant components of the microbial community inhabiting the industrial heap and the metabolisms involved in microbial responses to changes in the heap environment that affect the process performance. The microbial community's predominant components were Acidithiobacillus ferrooxidans, At. thiooxidans, Leptospirillum ferriphilum, and Sulfobacillus sp. Oxygen reduction, CO2 and N2 fixation/uptake, iron and sulfur oxidation, and response to osmotic stress were the metabolisms selected regarding research results previously reported in the system. After that, qPCR primers for each candidate gene were designed and validated. The expression profile of the selected genes vs. environmental key variables in pure cultures, column-leaching tests, and the industrial bioleaching heap was defined. We presented the results obtained from the industrial validation of the marker genes selected for assessing CO2 and N2 availability, osmotic stress response, as well as ferrous iron and sulfur oxidation activity in the bioleaching heap process of MEL. We demonstrated that molecular markers are useful for assessing limiting factors like nutrients and air supply, and the impact of the quality of recycled solutions. We also learned about the attributes of variables like CO2, ammonium, and sulfate levels that affect the industrial ROM-scale operation.

Project description:BACKGROUND:The classification systems for proximal humeral fractures routinely used in clinical practice include the Neer and Arbeitsgemeinschaft für Osteosynthesefragen/Orthopaedic Trauma Association (AO/OTA) 2007 systems. Currently used systems have low inter- and intraobserver reliability. In 2018, AO/OTA introduced a new classification system with the aim of simplifying the coding process, in which the Neer four-part classification was integrated into the fracture description. The aim of the present work is to assess the inter- and intraobserver agreement of the new AO/OTA 2018 compared with the Neer and AO/OTA 2007 classifications. MATERIALS AND METHODS:A total of 116 radiographs of consecutive patients with proximal humeral fracture were selected and classified by three observers with different levels of experience. All three observers independently reviewed and classified the images according to the Neer, AO/OTA 2007, and new AO/OTA 2018 systems. To determine the intraobserver agreement, the observers reviewed the same set of radiographs after an interval of 8 weeks. The inter- and intraobserver agreement were determined through Cohen's kappa coefficient analysis. RESULTS:The new AO/OTA 2018 classification showed substantial mean inter- (k = 0.67) and intraobserver (k = 0.75) agreement. These results are similar to the reliability observed for the Neer classification (interobserver, k = 0.67; intraobserver, k = 0.85) but better than those found for the AO/OTA 2007 system, which showed only moderate inter- (k = 0.57) and intraobserver (k = 0.58) agreement. The two more experienced observers showed better overall agreement, but no statistically significant difference was found. No differences were found between surgical experience and agreement regarding specific fracture types or groups. CONCLUSIONS:The results showed that the Neer system still represents the more reliable and reproducible classification. However, the new AO/OTA 2018 classification improved the agreement among observers compared with the AO/OTA 2007 system, while still maintaining substantial descriptive power and simplifying the coding process. The universal modifiers and qualifications, despite their possible complexity, allowed a more comprehensive fracture definition without negatively affecting the reliability or reproducibility of the classification system. LEVEL OF EVIDENCE:Level III, diagnostic studies.

Project description:BackgroundThe respiratory properties of perfluorocarbons (PFC) have been widely studied for liquid ventilation in humans and animals. Several PFC were tested but their tolerance may depend on the species. Here, the effects of a single administration of liquid PFC into pig lungs were assessed and compared. Three different PFC having distinct evaporative and spreading coefficient properties were evaluated (Perfluorooctyl bromide [PFOB], perfluorodecalin [PFD] and perfluoro-N-octane [PFOC]).MethodsPigs were anesthetized and submitted to mechanical ventilation. They randomly received an intra-tracheal administration of 15 ml/kg of either PFOB, PFD or PFOC with 12 h of mechanical ventilation before awakening and weaning from ventilation. A Control group was submitted to mechanical ventilation with no PFC administration. All animals were followed during 4 days after the initial PFC administration to investigate gas exchanges and clinical recovery. They were ultimately euthanized for histological analyses and assessment of PFC residual concentrations within the lungs using dual nuclei fluorine and hydrogen Magnetic Resonance Imaging (MRI). Sixteen animals were included (4/group).ResultsIn the PFD group, animals tended to be hypoxemic after awakening. In PFOB and PFOC groups, blood gases were not significantly different from the Control group after awakening. The poor tolerance of PFD was likely related to a large amount of residual PFC, as observed using MRI in all lung samples (≈10% of lung volume). This percentage was lower in the PFOB group (≈1%) but remained significantly greater than in the Control group. In the PFOC group, the percentage of residual PFC was not significantly different from that of the Control group (≈0.1%). Histologically, the most striking feature was an alveolar infiltration with foam macrophages, especially in the groups treated by PFD or PFOB.ConclusionsOf the three tested perfluorocarbons, PFOC offered the best tolerance in terms of lung function, gas exchanges and residuum in the lung. PFOC was rapidly cleared from the lungs and virtually disappeared after 4 days whereas PFOB persisted at significant levels and led to foam macrophage infiltration. PFOC could be relevant for short term total liquid ventilation with a rapid weaning.

Dataset Information

Comparison of three different bioleaching systems for Li recovery from lepidolite.

Publications

Comparison of three different bioleaching systems for Li recovery from lepidolite.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets