Browse
Submit Data
Databases
API
Help

Dataset Information

68 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Synthesis and characterization of magnetic nanoparticles coated with polystyrene sulfonic acid for biomedical applications.

ABSTRACT: The development of novel magnetic nanoparticles (MNPs) with satisfactory biocompatibility for biomedical applications has been the subject of extensive exploration over the past two decades. In this work, we synthesized superparamagnetic iron oxide MNPs coated with polystyrene sulfonic acid (PSS-MNPs) and with a conventional co-precipitation method. The core size and hydrodynamic diameter of the PSS-MNPs were determined as 8-18 nm and 50-200 nm with a transmission electron microscopy and dynamic light scattering, respectively. The saturation magnetization of the particles was measured as 60 emu g^-1 with a superconducting quantum-interference-device magnetometer. The PSS content in the PSS-MNPs was 17% of the entire PSS-MNPs according to thermogravimetric analysis. Fourier-transform infrared spectra were recorded to detect the presence of SO₃ ^- groups, which confirmed a successful PSS coating. The structural properties of the PSS-MNPs, including the crystalline lattice, composition and phases, were characterized with an X-ray powder diffractometer and 3D nanometer-scale Raman microspectrometer. MTT assay and Prussian-blue staining showed that, although PSS-MNPs caused no cytotoxicity in both NIH-3T3 mouse fibroblasts and SK-HEP1 human liver-cancer cells up to 1000 μg mL^-1, SK-HEP1 cells exhibited significantly greater uptake of PSS-MNPs than NIH-3T3 cells. The low cytotoxicity and high biocompatibility of PSS-MNPs in human cancer cells demonstrated in the present work might have prospective applications for drug delivery.

SUBMITTER: Chen BW

PROVIDER: S-EPMC7476547 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Magnetic Nanoparticles Coated with (<i>R</i>)-9-Acetoxystearic Acid for Biomedical Applications.

Project description:The well-known ability to selectively drive nanomagnetic materials coated with anticancer drugs into tumor cells suggested the synthesis and the characterization of magnetic nanoparticles (MNPs) functionalized with (R)-9-acetoxystearic acid, the acetic ester of (R)-9-hydroxystearic acid (9-HSA), an antiproliferative agent active against different cancer cells. The acyl chloride of (R)-9-acetoxystearic acid, synthesized in two steps from 9-HSA, was reacted with (3-aminopropyl)triethoxysilane, chosen as a linker between MNPs and the stearyl moiety. In the last step, the novel amide was bound to magnetite NPs by reaction with silyl groups. A detailed structural, chemical, and magnetic characterization of the obtained material proved that it possesses properties in agreement with the requirements for drug delivery, opening the possibility to further insights focused on the 9-HSA biomedical applications.

| S-EPMC7288358 | biostudies-literature

Extracellular and intracellular intermittent magnetic-fluid hyperthermia treatment of SK-Hep1 hepatocellular carcinoma cells based on magnetic nanoparticles coated with polystyrene sulfonic acid.

Project description:The use of magnetic nanoparticles (MNPs) magnetized on applying an alternating magnetic field (AMF) to stimulate the thermal characteristics and to induce tumor apoptosis is a currently active area of research in cancer treatment. In previous work, we developed biocompatible and superparamagnetic polystyrene-sulfonic-acid-coated magnetic nanoparticles (PSS-MNPs) as applications for magnetically labeled cell trapping, but without assessment of treatment effects on tumor diseases. In the present work, we examined PSS-MNP-induced magnetic fluid hyperthermia (MFH) on SK-Hep1 hepatocellular carcinoma (HCC) cells for lethal thermal effects with a self-made AMF system; an adjustable AMF frequency generated a variable intensity of magnetic field and induced MNP relaxation. The extracellular and intracellular MFH treatments on a SK-Hep1 cell line were implemented in vitro; the result indicates that the lethal effects were efficient and caused a significantly decreased cell viability of SK-Hep1 cells. As the PSS-MNP concentration decreased, especially in intracellular MFH treatments, the MFH effects on cells, however, largely decreased through heat spreading to the culture medium. On controlling and decreasing the volume of culture medium, the problem of heat spreading was solved. It can be consequently expected that PSS-MNPs would be a prospective agent for intracellular cancer magnetotherapy.

| S-EPMC7864458 | biostudies-literature

Novel Characterization Techniques for Multifunctional Plasmonic-Magnetic Nanoparticles in Biomedical Applications.

Project description:In the rapidly emerging field of biomedical applications, multifunctional nanoparticles, especially those containing magnetic and plasmonic components, have gained significant attention due to their combined properties. These hybrid systems, often composed of iron oxide and gold, provide both magnetic and optical functionalities and offer promising avenues for applications in multimodal bioimaging, hyperthermal therapies, and magnetically driven selective delivery. This paper focuses on the implementation of advanced characterization methods, comparing statistical analyses of individual multifunctional particle properties with macroscopic properties as a way of fine-tuning synthetic methodologies for their fabrication methods. Special emphasis is placed on the size-dependent properties, biocompatibility, and challenges that can arise from this versatile nanometric system. In order to ensure the quality and applicability of these particles, various novel methods for characterizing the magnetic gold particles, including the analysis of their morphology, optical response, and magnetic response, are also discussed, with the overall goal of optimizing the fabrication of this complex system and thus enhancing its potential as a preferred diagnostic agent.

| S-EPMC10675523 | biostudies-literature

Improved functionalization of oleic acid-coated iron oxide nanoparticles for biomedical applications.

Project description:Superparamagnetic iron oxide nanoparticles can provide multiple benefits for biomedical applications in aqueous environments such as magnetic separation or magnetic resonance imaging. To increase the colloidal stability and allow subsequent reactions, the introduction of hydrophilic functional groups onto the particles' surface is essential. During this process, the original coating is exchanged by preferably covalently bonded ligands such as trialkoxysilanes. The duration of the silane exchange reaction, which commonly takes more than 24 h, is an important drawback for this approach. In this paper, we present a novel method, which introduces ultrasonication as an energy source to dramatically accelerate this process, resulting in high-quality water-dispersible nanoparticles around 10 nm in size. To prove the generic character, different functional groups were introduced on the surface including polyethylene glycol chains, carboxylic acid, amine, and thiol groups. Their colloidal stability in various aqueous buffer solutions as well as human plasma and serum was investigated to allow implementation in biomedical and sensing applications. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s11051-012-1100-5) contains supplementary material, which is available to authorized users.

| S-EPMC3460177 | biostudies-other

Synthesis of Polystyrene-Coated Superparamagnetic and Ferromagnetic Cobalt Nanoparticles.

Project description:Polystyrene-coated cobalt nanoparticles (NPs) were synthesized through a dual-stage thermolysis of cobalt carbonyl (Co₂(CO)₈). The amine end-functionalized polystyrene surfactants with varying molecular weight were prepared via atom-transfer radical polymerization technique. By changing the concentration of these polymeric surfactants, Co NPs with different size, size distribution, and magnetic properties were obtained. Transmission electron microscopy characterization showed that the size of Co NPs stabilized with lower molecular weight polystyrene surfactants (Mn = 2300 g/mol) varied from 12⁻22 nm, while the size of Co NPs coated with polystyrene of middle (Mn = 4500 g/mol) and higher molecular weight (Mn = 10,500 g/mol) showed little change around 20 nm. Magnetic measurements revealed that the small cobalt particles were superparamagnetic, while larger particles were ferromagnetic and self-assembled into 1-D chain structures. Thermogravimetric analysis revealed that the grafting density of polystyrene with lower molecular weight is high. To the best of our knowledge, this is the first study to obtain both superparamagnetic and ferromagnetic Co NPs by changing the molecular weight and concentration of polystyrene through the dual-stage decomposition method.

| S-EPMC6404081 | biostudies-literature

Albumin and Hyaluronic Acid-Coated Superparamagnetic Iron Oxide Nanoparticles Loaded with Paclitaxel for Biomedical Applications.

Project description:Super paramagnetic iron oxide nanoparticles (SPION) were augmented by both hyaluronic acid (HA) and bovine serum albumin (BSA), each covalently conjugated to dopamine (DA) enabling their anchoring to the SPION. HA and BSA were found to simultaneously serve as stabilizing polymers of Fe₃O₄·DA-BSA/HA in water. Fe₃O₄·DA-BSA/HA efficiently entrapped and released the hydrophobic cytotoxic drug paclitaxel (PTX). The relative amount of HA and BSA modulates not only the total solubility but also the paramagnetic relaxation properties of the preparation. The entrapping of PTX did not influence the paramagnetic relaxation properties of Fe₃O₄·DA-BSA. Thus, by tuning the surface structure and loading, we can tune the theranostic properties of the system.

| S-EPMC6152103 | biostudies-literature

Synthesis, transfer, and characterization of core-shell gold-coated magnetic nanoparticles.

Project description:Magnetic separation has gained new popularity as a versatile partitioning method with the recent growth in nanotechnology and related biotechnology applications. In this study, iron oxide magnetic nanoparticles were synthesized via solvothermal methods and directly coated with gold to form core-shell gold-coated magnetic nanoparticles (Fe3O4-AuNPs). High-resolution transmission electron microscopy with Energy dispersive X-ray spectroscopy results suggests that temperature and reaction time play an important role in the formation of small, monodisperse Fe3O4-AuNPs. We also demonstrate that increased 4- dimethyl(amino)pyridine (DMAP) concentrations and vigorous stirring were required to successfully transfer Fe3O4-AuNPs into aqueous solution. The structure and morphology of the synthesized and transferred Fe3O4-AuNPs was further confirmed by UV-vis absorption spectroscopy and solubility experiments. •Direct coating of Fe3O4 with Au: Slowly heating by (10 °C/ min) until 180-190 °C without exceeding this reaction temperature and increasing the reaction time to 3 h from 1.5 h•High yield transfer of Fe3O4-AuNPs was achieved using 4- dimethyl(amino)pyridine (DMAP) as phase transfer catalyst.

| S-EPMC6396083 | biostudies-literature

3,4-Dihydroxiphenylacetic Acid-Based Universal Coating Technique for Magnetic Nanoparticles Stabilization for Biomedical Applications.

Project description:Magnetic nanoparticles based on iron oxide attract researchers' attention due to a wide range of possible applications in biomedicine. As synthesized, most of the magnetic nanoparticles do not form the stable colloidal solutions that are required for the evaluation of their interactions with cells or their efficacy on animal models. For further application in biomedicine, magnetic nanoparticles must be further modified with biocompatible coating. Both the size and shape of magnetic nanoparticles and the chemical composition of the coating have an effect on magnetic nanoparticles' interactions with living objects. Thus, a universal method for magnetic nanoparticles' stabilization in water solutions is needed, regardless of how magnetic nanoparticles were initially synthesized. In this paper, we propose the versatile and highly reproducible ligand exchange technique of coating with 3,4-dihydroxiphenylacetic acid (DOPAC), based on the formation of Fe-O bonds with hydroxyl groups of DOPAC leading to the hydrophilization of the magnetic nanoparticles' surfaces following phase transfer from organic solutions to water. The proposed technique allows for obtaining stable water-colloidal solutions of magnetic nanoparticles with sizes from 21 to 307 nm synthesized by thermal decomposition or coprecipitation techniques. Those stabilized by DOPAC nanoparticles were shown to be efficient in the magnetomechanical actuation of DNA duplexes, drug delivery of doxorubicin to cancer cells, and targeted delivery by conjugation with antibodies. Moreover, the diversity of possible biomedical applications of the resulting nanoparticles was presented. This finding is important in terms of nanoparticle design for various biomedical applications and will reduce nanomedicines manufacturing time, along with difficulties related to comparative studies of magnetic nanoparticles with different magnetic core characteristics.

| S-EPMC10531619 | biostudies-literature

Laser-ablative aqueous synthesis and characterization of elemental boron nanoparticles for biomedical applications.

Project description:Boron-based nano-formulations look very promising for biomedical applications, including photo- and boron neutron capture therapies, but the fabrication of non-toxic water-dispersible boron nanoparticles (NPs), which contain the highest boron atom concentration, is difficult using currently available chemical and plasma synthesis methods. Here, we demonstrate purely aqueous synthesis of clean boron NPs by methods of femtosecond laser ablation from a solid boron target in water, thus free of any toxic organic solvents, and characterize their properties. We show that despite highly oxidizing water ambience, the laser-ablative synthesis process follows an unusual scenario leading to the formation of boron NPs together with boric acid (H3BO3) as an oxidation by-product coating the nanoparticles, which acts to stabilize the elemental boron NPs dispersion. We then demonstrate the purification of boron NPs from residual boric acid in deionized water, followed by their coating with polyethylene glycol to improve colloidal stability and biocompatibility. It was found that the formed NPs have a spherical shape with averaged size of about 37 nm, and are composed of elemental boron in mostly amorphous phase with the presence of certain crystalline fraction. The synthesized NPs demonstrate low toxicity and exhibit strong absorption in the NIR window of relative tissue transparency, promising their use in photoacoustic imaging and phototherapy, in addition to their promise for neutron capture therapy. This combined potential ability of generating imaging and therapy functionalities makes laser-synthesized B NPs a very promising multifunctional agent for biomedical applications.

| S-EPMC9159993 | biostudies-literature

Synthesis, magnetic characterization and sensing applications of novel dextran-coated iron oxide nanorods.

Project description:Monodisperse, water-soluble dextran-coated iron oxide (Fe(3)O(4)) nanorods were synthesized using a facile and scalable approach. Our room temperature method involves the mixing of an acidic solution of iron salts with a basic solution of ammonium hydroxide to facilitate initial formation of iron oxide crystals. The stability, crystalinity and shape of these nanorods depends on the time of addition of the dextran, as well as the degree of purity of the polymer. The as-synthesized nanorods exhibit unique magnetic properties, including superparamagnetic behavior and high spin-spin water relaxivity (R2). Additionally, they possess enhanced peroxidase activity when compared to those reported in the literature for spherical iron oxide nanoparticles. Thus, this high yield synthetic method for polymer-coated iron oxide nanorods will expedite their use in applications from magnetic sensors, devices and nanocomposites with magnetic and catalytic properties.

| S-EPMC2830002 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data